導入
The DEWALT DW3278 Circular Saw Fence is designed to assist in making straight, precise rip cuts with compatible DEWALT circular saws. This accessory provides a stable guide for consistent cutting distances, enhancing accuracy and efficiency in your woodworking tasks. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.
安全情報
Always prioritize safety when using power tools and accessories. Failure to follow these safety guidelines may result in serious personal injury or property damage.
- 目の保護: To minimize the risk of eye injury, always wear appropriate eye protection, such as safety glasses or goggles, when operating a circular saw with this fence.
- のこぎりのマニュアルを読む: Always refer to your circular saw's instruction manual for specific safety warnings and operating procedures.
- 安全な添付ファイル: Ensure the rip fence is securely fastened to the saw before each use. A loose fence can lead to inaccurate cuts and potential kickback.
- Proper Material Support: Always support your workpiece adequately to prevent binding or shifting during cutting.
- 作業エリアを清潔に保つ: Keep your work area clean and well-lit. Cluttered areas invite accidents.
- 使用前に点検してください: Before each use, inspect the rip fence for any damage or wear. Do not use if damaged.
製品終了view
The DEWALT DW3278 Circular Saw Fence includes the following components:
- Rip Fence (Guide Bar)
- Knob and Screw Assembly
図1: The DEWALT DW3278 Circular Saw Fence, showing the main guide bar and the securing knob.
セットアップとインストール
Follow these steps to properly attach the DW3278 Circular Saw Fence to your compatible DEWALT circular saw:
- のこぎりのプラグを抜く: Always ensure the circular saw is unplugged from its power source before performing any adjustments or accessory installations.
- スロットを識別します: Locate the slots at the front of your circular saw's shoe (base plate). These slots are designed to accept the rip fence.
- Insert Rip Fence: Slide the rip fence through these slots. The fence should be positioned so that the guide bar extends parallel to the saw blade.
- 距離を調整: Adjust the rip fence to the desired distance from the saw blade. This distance will determine the width of your cut.
- ネジを締める: Secure the rip fence in place by tightening the screw on the saw's shoe. Ensure it is firmly secured to prevent movement during operation.
図2: Diagram illustrating the insertion and securing of the rip fence into the circular saw shoe.
互換性: This rip fence is compatible with most DEWALT circular saws, including models DCS575, DCS570, DCS577, DWE575, and DWS535. It is also compatible with most 7-1/4-inch to 8-1/4-inch DEWALT and Black & Decker circular saws. Note: This fence is not designed for use with all saw models, particularly some cordless models. Verify compatibility with your specific saw model before purchase and use.
操作手順
Once the rip fence is securely attached and adjusted, you can proceed with your cutting tasks:
- Measure and Set: Carefully measure the desired cutting width and adjust the rip fence accordingly. Ensure the measurement is taken from the correct side of the blade for accuracy.
- テストカット: For critical cuts, always perform a test cut on a scrap piece of material to verify the accuracy of your setup.
- ワークピースの位置: Place your workpiece on a stable surface. Position the circular saw so that the rip fence is firmly against the edge of the material you wish to cut.
- カット開始: With the saw blade clear of the workpiece, start the saw. Allow the blade to reach full speed before beginning the cut.
- Guide the Saw: Maintain firm pressure on the saw, keeping the rip fence pressed against the edge of the workpiece throughout the entire cut. Guide the saw smoothly and consistently.
- 完全カット： Continue the cut until the piece is separated. Release the trigger and allow the blade to stop completely before lifting the saw from the workpiece.
The rip fence helps achieve smooth, precise, and straight cuts, especially when ripping boards or trimming small pieces.
メンテナンス
Proper maintenance ensures the longevity and continued performance of your DEWALT DW3278 Circular Saw Fence:
- クリーニング： After each use, wipe down the rip fence with a clean, dry cloth to remove sawdust and debris.
- 検査： Regularly inspect the fence for any signs of damage, bending, or excessive wear. Check the securing knob and screw for proper function.
- ストレージ： Store the rip fence in a dry, clean environment, away from corrosive materials and extreme temperatures.
- 潤滑: No specific lubrication is required for this accessory.
トラブルシューティング
If you encounter issues with your DW3278 Circular Saw Fence, consider the following:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Fence does not fit saw. | Incompatible saw model (e.g., some 6-1/2 inch saws, certain cordless models). | Verify your saw model against the compatibility list (DCS575, DCS570, DCS577, DWE575, DWS535, and most 7-1/4 to 8-1/4 inch DEWALT/Black & Decker saws). |
| Fence is loose or wobbles. | Securing knob not tightened sufficiently. | Ensure the securing knob is fully tightened. If the knob is damaged, replace it. |
| Cuts are not straight or accurate. | Fence not properly aligned or secured; inconsistent pressure during cut. | Re-check fence alignment and ensure it is tightly secured. Maintain consistent pressure against the workpiece edge throughout the cut. |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | DW3278 |
| 材料 | All Metal Construction (Blend) |
| 製品寸法 | 長さ12.38インチ x 幅7.42インチ |
| アイテム重量 | 9.6オンス |
| 色 | 銀 |
| 対応デバイス | DEWALT, Black & Decker (most 7-1/4" to 8-1/4" circular saws) |
| 欧州連合 | 028874032781 |
保証情報
For detailed warranty information regarding your DEWALT DW3278 Circular Saw Fence, please refer to the warranty card included with your original purchase or visit the official DEWALT webサイトをご覧ください。保証条件は地域や製品の種類によって異なる場合があります。
サポート
If you have any questions, require technical assistance, or need to order replacement parts for your DEWALT DW3278 Circular Saw Fence, please contact DEWALT Customer Service:
- Webサイト： www.dewalt.com
- 電話： DEWALTを参照してください web地域の連絡先番号のサイト。
When contacting support, please have your product model number (DW3278) and purchase information readily available.
