Humsienk 24V 100Ah LiFePO4 バッテリー

導入

The Humsienk 24V 100Ah LiFePO4 Battery is a high-performance, long-lasting power solution designed for various applications including RVs, campers, solar energy systems, marine vessels, and off-grid setups. Equipped with Grade A+ Automotive LiFePO4 cells and an advanced 100A Battery Management System (BMS), this battery offers superior safety, energy density, and stability. It provides reliable power with a minimal self-discharge rate and robust protection features.

図1：Humsienk 25.6V 100Ah LiFePO4バッテリー

安全情報

Please read and understand all safety instructions before operating the battery. Failure to follow these instructions may result in serious injury or damage to the battery.

• 充電温度: Always charge the battery at temperatures above 0°C (32°F) to prevent damage and ensure optimal performance.
• 吐出温度： The battery can discharge safely between -20°C (-4°F) and 70°C (158°F).
• BMS保護: The integrated 100A BMS provides protection against overcharge, over-discharge, over-current, short circuits, and high/low temperature cutoffs. Do not bypass or tampBMS を使用します。
• 物理的ダメージ: Do not puncture, drop, crush, or disassemble the battery. Avoid exposing the battery to fire or extreme heat.
• 水への露出: バッテリーを水に浸したり、濡らしたりしないでください。
• 接続: すべての接続が確実に行われ、極性が正しいことを確認してください。配線を誤ると、バッテリーや接続されたデバイスが損傷する可能性があります。
• 換気： While LiFePO4 batteries do not off-gas like lead-acid batteries, ensure adequate ventilation in enclosed spaces during charging and discharging.
• 専門家による設置: For complex installations involving multiple batteries or high-power systems, it is recommended to consult a qualified electrician or solar professional.

Figure 2: 100A BMS features including automatic cell balancing, over-charge, over-discharge, over-current, short circuit, and high/low temperature cutoff protection. Also shows a diagram for a 51.2V 400Ah Battery Bank configuration.

パッケージ内容

開梱時にすべてのアイテムが揃っていて損傷がないことを確認してください。

• Humsienk 24V 100Ah LiFePO4バッテリー x 1
• M8 Bolts (2 x 12mm, 2 x 16mm) for terminal connections

仕様

Figure 3: Detailed product dimensions and weight (44lb).

Figure 4: Comparison highlighting the superior lifespan, lighter weight, higher cycle count, and 100% Depth of Discharge (DOD) of the Humsienk LiFePO4 battery compared to traditional lead-acid batteries.

セットアップとインストール

Proper installation is crucial for the safe and efficient operation of your Humsienk LiFePO4 battery. Always ensure the battery is disconnected from any loads or charging sources before making connections.

1. インストール前のチェック

• バッテリーに目に見える損傷がないか点検します。
• Ensure you have the correct tools and safety equipment (insulated wrenches, gloves, eye protection).
• Verify that your charging source (solar charge controller, inverter charger, etc.) is compatible with LiFePO4 batteries and set to the correct voltage と現在のパラメータ。

2. バッテリーの接続

• 端末接続: Use the provided M8 bolts to securely connect your battery cables to the positive (+) and negative (-) terminals. Ensure connections are tight to prevent arcing and overheating.
• 直列接続と並列接続: The battery supports up to 4P2S (4 parallel, 2 series) connections for expanding your power system. This allows for a maximum load power and energy output of 20.48kW/h. When connecting batteries in series or parallel, ensure all batteries are at a similar state of charge before connecting them.

図5：例ample of a DIY battery system setup, illustrating how multiple batteries can be connected to achieve higher power and energy output, supporting up to 4P2S connections.

Figure 6: Diagram showing a 51.2V 400Ah Battery Bank configuration, supporting up to 4P2S connection for a maximum load power and energy output of 20.48kW/h.

3. 取り付け

• バッテリーは、清潔で乾燥した換気の良い場所に設置してください。
• Ensure the battery is secured to prevent movement or vibration, especially in mobile applications like RVs or marine setups.

操作手順

Once installed, the Humsienk LiFePO4 battery is ready for use. Its robust design allows for reliable power delivery across various applications.

• 充電： Connect the battery to a compatible LiFePO4 charger or solar charge controller. Ensure the charging voltage and current are within the battery's specifications. The BMS will manage the charging process, but always monitor the initial charge.
• 放電中: The battery can power your devices within its specified voltage and current limits. The 100A BMS will protect against over-discharge.
• 温度範囲: Operate the battery within its specified discharge temperature range of -20°C (-4°F) to 70°C (158°F). Charging must occur above 0°C (32°F).
• 用途: This battery is ideal for RVs, yachts, solar energy storage, off-grid homes, and camping。

Figure 7: Humsienk batteries are essential for RV, Yacht, Solar Energy, Off Grid, and Campアプリケーションを作成します。

図8：例ample runtimes for common appliances: Coffee Maker (800W) for 3.2 hours, Microwave (500W) for 5.12 hours, Electric Kettle (300W) for 8.53 hours, and Refrigerator (200W) for 12.8 hours.

Figure 9: The battery supports normal operation at extreme temperatures, with a maximum discharge temperature of 158°F (70°C) and a minimum discharge temperature of -4°F (-20°C). Charging must occur above 0°C.

メンテナンス

The Humsienk LiFePO4 battery requires minimal maintenance due to its robust design and advanced BMS.

• 定期点検: バッテリー端子に腐食や緩みがないか定期的に点検してください。必要に応じて端子を清掃してください。
• 清潔で乾燥した状態を保つ: バッテリーの表面が清潔で乾燥していることを確認してください。ほこりや湿気がたまらないようにしてください。
• ストレージ： If storing the battery for an extended period, ensure it is charged to approximately 50% state of charge and stored in a cool, dry place. The self-discharge rate is only 3% per month.
• 極端な温度を避ける: While the battery has a wide operating temperature range, prolonged exposure to extreme heat or cold outside the recommended limits can affect its lifespan.

トラブルシューティング

If you encounter issues with your Humsienk LiFePO4 battery, refer to the following common troubleshooting steps:

• バッテリーが充電されていません:
  - Check all cable connections for tightness and correct polarity.
  - Verify that your charger is compatible with LiFePO4 batteries and is functioning correctly.
  - Ensure the ambient temperature is above 0°C (32°F) for charging. The BMS will prevent charging below this temperature.
• バッテリーが放電しない/電力出力がない:
  - Check all cable connections to the load for tightness and correct polarity.
  - The BMS may have activated a protection mode (e.g., over-discharge, over-current, high/low temperature). Disconnect the load, allow the battery to rest, and then attempt to charge it to reset the BMS.
  - Ensure the load is not exceeding the battery's maximum continuous discharge current (100A).
• 異常な臭いや腫れ: Immediately disconnect the battery from all connections and contact customer support. Do not attempt to use or charge the battery.

For issues not resolved by these steps, please contact Humsienk customer support.

ユーザーのヒント

• 適切なサイズ: Always calculate your power needs carefully to ensure the battery capacity and BMS current rating are sufficient for your application. Overloading the battery can trigger BMS protection and reduce its lifespan.
• Monitor State of Charge: While LiFePO4 batteries can be discharged to 100% Depth of Discharge (DOD), monitoring the state of charge can help you plan your power usage and extend the battery's overall life.
• 並列/直列接続: When building a larger battery bank, ensure all batteries are from the same manufacturer, model, and ideally, purchased at the same time to ensure optimal performance and longevity. Balance the voltage of individual batteries before connecting them in parallel or series.

保証とサポート

Humsienk 24V 100Ah LiFePO4バッテリーには、 2年間保証, as indicated in the product title. For warranty claims, technical assistance, or any product-related inquiries, please contact Humsienk customer support through your purchase platform or the official Humsienk webサイトをご覧ください。サポートにお問い合わせの際は、購入証明書とモデル番号をご用意ください。