1. はじめに
The SUNLU UV Resin Curing Box RC II is a state-of-the-art device designed for efficiently curing photopolymer resin models produced by SLA/DLP/LCD 3D printers. Featuring 360° fast curing, a large curing space, and an integrated air drying function, it ensures optimal post-processing for your 3D prints. This manual provides essential information for the safe and effective use of your curing box.
2. 主な特徴
- Large Curing Space: Offers a generous 200*200*250mm internal curing space, accommodating various model sizes.
- Fast Air Drying: Incorporates a self-developed patented air duct technology, reducing model air drying time by up to 60% compared to natural air drying.
- Three Adjustable Wind Speeds: Customize drying with low, medium, and high wind speed settings to suit different materials and projects.
- 360° Curing Surround: Equipped with 20 UV lamps (4 on top, 4 on the bottom, and 12 on the sides) for uniform, all-round irradiation and thorough curing.
- Removable Turntable: The transparent turntable is easily removable for convenient cleaning and maintenance.
- Solid Weight-bearing: Features a roller support design with a maximum load capacity of 2kg, suitable for large-volume models.
- High Power Curing: Boasts a 42W power output, 42% higher than previous generations, ensuring deep light penetration and enhanced curing effects.
- 統合設計: All-in-one unit, ready to use without complex installation.
3. パッケージ内容
箱を開けたら、以下の品目がすべて揃っていることを確認してください。
- SUNLU UV Resin Curing Box RC II Unit
- 電源アダプター
- 取り外し可能なターンテーブル
- 取扱説明書
4. セットアップ手順
- 開梱: Carefully remove the curing box and all accessories from the packaging.
- ターンテーブルの設置： For first-time use, install the transparent turntable inside the curing box. Place it securely on the central rotating mechanism.
- 電源接続: Plug the power adapter into the designated port at the back of the curing box. Connect the other end to a suitable power outlet. The indicator light on the front panel will illuminate, indicating power is applied.
5.操作ガイド
- 電源オン: Short press the main control button (usually a rotary knob) on the front panel to turn on the device. The display will show a default time, e.g., "15:00".
- 場所モデル: Open the front door and carefully place your 3D resin model in the center of the turntable. Close the door securely.
- モードの選択： Long press the main control button to cycle through the available modes:
- Mode 1 (DR light on): Air drying only.
- Mode 2 (UV light on): UV curing only.
- Mode 3 (DR+UV light on): Air drying and UV curing simultaneously (default mode).
- 期間を調整: Once a mode is selected, rotate the main control button to adjust the desired operation duration. The time can typically be set from 1 to 99 minutes.
- 運用開始： Short press the main control button again to start the selected process. The timer will begin counting down.
- Adjust Wind Speed (Air Drying Mode): If you are in Mode 1 (Air drying only) or Mode 3 (Air drying + Curing), you can adjust the wind speed by rotating the main control button during operation. Options typically include Low, Medium, and High.
- Checking Drying Status: During air drying mode, you can open the door to check the model's drying status at any time.
- 重要な安全上の注意: Do NOT open the door during UV curing mode operation to avoid exposure to UV light.
- 完了： The device will automatically stop once the set time has elapsed.
6. メンテナンス
- クリーニング： Regularly clean the interior of the curing box and the turntable. The turntable is removable for easier cleaning. Use a soft, dry cloth. For resin residue, use a small amount of isopropyl alcohol.
- 紫外線Lamp ケア： UV l を確保するamps are free from dust or resin splashes to maintain optimal curing performance. Do not touch the UV lamp直接。
- ストレージ： When not in use, store the curing box in a cool, dry place away from direct sunlight.
- 電源切断: 清掃やメンテナンスを行う前に、必ずデバイスの電源プラグを抜いてください。
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デバイスの電源が入らない | 電源アダプターが接続されていないか故障している、電源コンセントに問題がある | 電源アダプタがしっかりと接続されていることを確認してください。別のコンセントをお試しください。アダプタに損傷がないかご確認ください。 |
| UV lights not turning on | Incorrect mode selected; Door not fully closed | Ensure UV curing mode (Mode 2 or 3) is selected. Verify the door is completely closed. |
| Model not curing properly | Insufficient curing time; Resin type incompatibility; UV lamps dirty or faulty | Increase curing duration. Ensure resin is compatible with UV curing. Clean UV lamps. Contact support if lamps are faulty. |
| Air drying not effective | Low wind speed setting; Blocked air vents | Increase wind speed. Check and clear any obstructions from air vents. |
8. 仕様
| パラメータ | 価値 |
|---|---|
| モデル | RC-2 |
| 正味重量 | 2.4キロ |
| 外寸 | 245 x 235 x 305 ミリメートル |
| 内部サイズ | 230 x 230 x 250 ミリメートル |
| 最大硬化サイズ | 200 x 200 x 250 ミリメートル |
| Number of UV Lamps | 20 (4 top, 4 bottom, 12 side) |
| 色 | 黒 |
| 力 | 42ワット |
| アダプタ入力 | AC100V～240V 50Hz/60Hz |
| アダプタ出力 | DC 12V±0.2V 3.5A |
9. ユーザーのヒント
- 樹脂の互換性: The SUNLU UV Resin Curing Box RC II is generally compatible with various UV resins, including those used for molding applications like jewelry (e.g., earrings). Always check the resin manufacturer's recommendations for curing times and UV wavelength compatibility (this unit uses 450nm UV light).
- Optimal Curing: For best results, ensure your models are thoroughly cleaned of uncured resin before placing them in the curing box.
- 換気： While the device has an air drying function, ensure adequate room ventilation when working with resin, as fumes can be present.
10. 保証とサポート
For warranty information, technical support, or service inquiries, please refer to the official SUNLU webご購入の際は、サイトをご覧いただくか、販売店にお問い合わせください。購入証明書としてレシートを保管してください。
