Wireless Weather Station FJ3551A User Manual

1. はじめに

Thank you for choosing the Weytoll FJ3551A Wireless Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, weather forecasts, an alarm clock with snooze function, and a clear, colorful LCD touch screen. This manual will guide you through the setup, operation, and maintenance of your new weather station.

2. パッケージ内容

• ワイヤレス気象ステーション（本体）×1
• ワイヤレス屋外センサー x 1
• USBケーブル1本
• ユーザーマニュアル x 1

3.製品オーバーview

Familiarize yourself with the main unit and its components:

Front Panel Controls and Display Elements:

• A1: 'Snooze/Backlight' button: Activates snooze during alarm, adjusts backlight intensity.
• A2: Alarm clock icon: アラームが設定されていることを示します。
• A3: Weather forecast icons: Displays predicted weather conditions (sunny, cloudy, overcast, rain).
• A4: Date: 現在の日付を表示します。
• A5: Time: 現在の時刻を表示します。
• A6: 室内温度: 現在の室内温度。
• A7: Comfort expression: Icon indicating indoor comfort level (DRY, COM, WET).
• A8: 室内湿度: 現在の室内の湿度。
• A9: Outdoor sensor channel indicator: Shows which outdoor sensor channel is active.
• A10: 屋外温度: 屋外センサーからの現在の温度。
• A11: 屋外湿度: Current humidity from the outdoor sensor.
• A12: '°C/°F' switch: 温度の単位を摂氏と華氏で切り替えます。
• A13: Sensor channel/up button: Cycles through outdoor sensor channels or increases values during setting.
• A14: Menu/down button: Accesses settings menu or decreases values during setting.

Rear Panel and Power:

• AA battery x2: Battery compartment for backup power (batteries not included).
• DC 5V USB power supply: Main power input for the unit.

4. 仕様

5. セットアップ

5.1 本体の電源供給

1. USB電源： Connect the provided USB cable to the DC 5V USB power supply port on the back of the main unit (refer to Figure 3.1). Plug the other end into a compatible USB power adapter (not included) or a USB port on a device like a power bank or laptop. This is the primary power source.
2. バッテリーバックアップ： For backup power, open the battery compartment on the back of the main unit and insert 2 x LR6 AA batteries (not included), ensuring correct polarity. The unit can operate on batteries alone, but the backlight functionality may be limited to conserve power.

5.2 ワイヤレス屋外センサーへの電源供給

1. ワイヤレス屋外センサーの背面にある電池ケースを開きます。
2. Insert 2 x AA batteries (not included), observing correct polarity.
3. 電池ケースをしっかりと閉めてください。

5.3 初期ペアリングと配置

1. 初期設定時は本体と屋外センサーを近づけて設置してください。
2. Once both units are powered, the main unit will automatically search for the outdoor sensor. The outdoor temperature and humidity should appear on the main unit's display.
3. 屋外センサーの配置： The outdoor sensor is IPX4 waterproof, meaning it is resistant to splashing water. For best results and accurate readings, place the sensor in a shaded area, away from direct sunlight and heavy rain. Ensure it is within 60 meters (197 feet) of the main unit in an open area. Avoid placing it near large metal objects or other electronic devices that might cause interference. The sensor can be wall-mounted or placed on a stand.

5.4 本体の取り付け

The main unit can be placed on a flat surface using its integrated stand or wall-mounted using the hanging hole on its back.

6. 操作

6.1 時刻と日付の設定

1. Press and hold the 'Menu/down' button (A14) to enter time setting mode.
2. Use the 'Sensor channel/up' button (A13) and 'Menu/down' button (A14) to adjust the values (e.g., hour, minute, year, month, day).
3. Press the 'Menu/down' button (A14) again to confirm each setting and move to the next.
4. The calendar supports dates up to 2099.

6.2 アラームとスヌーズの設定

1. Press the 'Menu/down' button (A14) once to display the alarm time.
2. Press and hold the 'Menu/down' button (A14) to enter alarm setting mode.
3. Adjust the alarm hour and minute using the 'Sensor channel/up' button (A13) and 'Menu/down' button (A14).
4. Press 'Menu/down' button (A14) to confirm.
5. When the alarm sounds, press the 'Snooze/Backlight' button (A1) to activate the 5-minute snooze function. To turn off the alarm, press any other button.

6.3 温度単位の選択（°C/°F）

Press the '°C/°F' switch button (A12) on the front panel to toggle between Celsius and Fahrenheit display for both indoor and outdoor temperatures.

6.4 バックライトの調整

Press the 'Snooze/Backlight' button (A1) repeatedly to cycle through 4 backlight levels: High, Medium, Low, and Off. Note that backlight intensity may be limited when operating on battery power only.

6.5天気予報

The weather station provides a personalized forecast based on changes in temperature, humidity, and barometric pressure. The forecast is displayed using vivid icons (A3) for sunny, cloudy, overcast, and rain conditions (refer to Figure 3.3).

6.6 Indoor Comfort Level

The main unit displays a comfort expression icon (A7) based on indoor temperature and humidity. There are three levels: DRY, COM (comfortable), and WET (refer to Figure 3.4). If the surrounding temperature is higher than 25°C or lower than 20°C, the comfort expression will not be displayed.

6.7 最高/最低温度と湿度の記録

The weather station automatically records the maximum and minimum indoor/outdoor temperature and humidity values. Press the 'MEM' button (part of A13/A14 button cluster) to view これらの記録は消去されます。もう一度押すと消去されます。

6.8 複数の屋外センサー（オプション）

The weather station supports up to 3 wireless outdoor sensors. If you have additional sensors, press the 'CH' button (part of A13/A14 button cluster) to cycle through the channels (CH1, CH2, CH3) and view さまざまなセンサーからの読み取り値。

7. メンテナンス

7.1 クリーニング

本体と屋外センサーを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤や溶剤はディスプレイやコンピューターを損傷する恐れがあるため使用しないでください。asing.

7.2 電池の交換

When the low battery indicator appears on the display, replace the batteries in both the main unit (if using backup) and the outdoor sensor promptly to ensure continuous operation and accurate readings.

7.3 Outdoor Sensor Care

Although the outdoor sensor is IPX4 waterproof, prolonged exposure to extreme weather conditions (e.g., heavy rain, direct intense sunlight, snow) may affect its lifespan and accuracy. Position it in a sheltered location if possible.

8。 トラブルシューティング

• 本体にディスプレイが表示されない:
  - Ensure the USB cable is securely connected and receiving power.
  - If using battery backup, check if the AA batteries are inserted correctly and are not depleted.
• 屋外の温度/湿度の読み取りなし:
  - Check the batteries in the outdoor sensor and replace if necessary.
  - Ensure the outdoor sensor is within the 60-meter transmission range of the main unit and there are no major obstructions.
  - Try repositioning both units to minimize interference.
• 不正確な読み取り:
  - Ensure the outdoor sensor is not in direct sunlight or exposed to heat sources, which can skew temperature readings.
  - Verify that both units are placed in well-ventilated areas.
• 低バッテリーインジケーター:
  - Replace the batteries in the respective unit (main unit or outdoor sensor) as soon as possible.

9. ユーザーのヒント

• 複数のセンサー: The weather station is designed to support up to three outdoor sensors. If you wish to monitor different locations, you can purchase additional compatible sensors and easily switch between their readings using the 'CH' button.
• 最適なバックライト: For continuous, bright backlight, always use the USB power supply. Battery power is best for temporary use or as a backup.

10. 保証とサポート

ご質問、テクニカルサポート、または保証請求については、販売元またはメーカーに直接お問い合わせください。具体的な連絡先については、購入時の文書をご覧ください。