1. はじめに
This manual provides essential information for the safe and effective use of your new 2095mm carbon spring steel bandsaw blades. These blades are designed for woodworking applications and are compatible with specific DeWALT and Elu bandsaw models. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.
2. 安全情報
Always prioritize safety when working with power tools and sharp objects. Failure to follow safety instructions can result in serious injury.
- 個人用保護具（PPE）： Always wear safety glasses, hearing protection, and appropriate gloves when handling or operating bandsaw blades.
- ブレードの取り扱い: Bandsaw blades are extremely sharp. Handle them with care to prevent cuts.
- Machine Disconnection: Ensure the bandsaw is unplugged from the power source before installing, removing, or adjusting blades.
- 刃の検査: Before each use, inspect the blade for any signs of damage, cracks, or dullness. Do not use damaged blades.
- 適切な張力: Ensure the blade is correctly tensioned according to your bandsaw manufacturer's instructions. Incorrect tension can lead to blade breakage or poor cuts.
- ワークピースのセキュリティ: 切断する前に必ずワークピースをしっかりと固定してください。
- 作業エリアをクリア: 作業エリアを清潔に保ち、障害物を取り除いてください。
3. 製品仕様
These bandsaw blades are manufactured from high-quality SK5 carbon spring steel, designed for durability and efficient cutting in various woodworking tasks.
| 属性 | 価値 |
|---|---|
| 材料 | SK5 Carbon Spring Steel |
| 長さ | 2095mm |
| 幅オプション | 6mm、10mm、16mm |
| 厚さ | 0.5mm |
| TPI (Teeth Per Inch) Options | 3 TPI, 6 TPI |
| 個数 | パックあたり2 |
| ブレードタイプ | Band Saw Blades |
| 仕上げ | 窒化物 |
| 使用目的 | Home DIY Woodworking |
| 認証 | なし |
| 起源 | 中国本土 |
4. 互換性
These 2095mm bandsaw blades are suitable for the following bandsaw models:
- DeWALT: BS1310 (Type 1), BS9310 (Type 1), DW3401 (Type 1), DW3501 (Type 1), DW738 (Type 1, 2, 3), DW739 (Type 1, 2, 3)
- Elu: EBS3401 (Type 1), EBS3403 (Type 1), EBS3501 (Type 1), EBS3503 (Type 1)
5. インストールとセットアップ
Proper installation is crucial for safe and effective operation. Always refer to your bandsaw's specific user manual for detailed blade installation instructions. The following are general guidelines:
- 電源を切る: Ensure the bandsaw is unplugged from the power source.
- オープンガード: Open the upper and lower blade guards and release the blade tension.
- 古いブレードを取り外す: Carefully remove the old blade, wearing gloves.
- 新しいブレードをインストールします: Place the new blade onto the wheels, ensuring the teeth are pointing downwards towards the table.
- トラッキングを調整する: Adjust the blade tracking so the blade runs centrally on the wheels.
- テンションを適用: Apply the correct blade tension as recommended by your bandsaw manufacturer.
- Close Guards: Close and secure all blade guards.
- 試運転： Plug in the bandsaw and perform a brief test run to ensure the blade is tracking correctly and running smoothly before making any cuts.
正しい刃の選択
Selecting the appropriate blade width and TPI (Teeth Per Inch) is essential for different cutting tasks. Refer to the diagrams below for guidance:
Figure 1: Blade Selection Guide
This diagram illustrates tooth selection for rectangular solids, pipe/tubing/structurals, and round solids based on wall thickness. It also provides guidance for choosing blade width: narrow for contour sawing (desired radius cut) and wider for cut-off sawing (straighter cut). A minimum radius chart for various blade widths is included.
Figure 2: Blade Usage and Relief Cuts
This table details recommended blade widths and TPI for various materials and applications. It also includes a diagram explaining relief cuts, which are used to facilitate cutting curves.
6. 操作
Once the blade is correctly installed and tensioned, and all safety checks are complete, you can begin operation. Always ensure your workpiece is stable and that you maintain a safe distance from the blade. Feed the material at a consistent rate appropriate for the material type and blade TPI.
7. メンテナンス
Regular maintenance will extend the life of your bandsaw blades and ensure consistent cutting performance.
- クリーニング： After each use, clean any sawdust or resin buildup from the blade using a brush or appropriate blade cleaner.
- ストレージ： Store blades in a dry place to prevent rust. Keep them coiled safely to avoid injury.
- 検査： Periodically inspect blades for dullness, broken teeth, or cracks. Replace dull or damaged blades immediately.
- Tension Release: For prolonged storage, it is recommended to slightly release blade tension on the bandsaw to prevent fatigue on the blade and machine components.
8。 トラブルシューティング
以下に、一般的な問題とその潜在的な解決策をいくつか示します。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 刃が頻繁に壊れる | Incorrect tension, dull blade, improper tracking, excessive feed rate, wrong blade for material. | Check and adjust blade tension, replace dull blade, adjust tracking, reduce feed rate, use appropriate blade. |
| Poor cut quality (rough, wavy) | Dull blade, insufficient tension, incorrect blade guides, excessive feed rate. | Replace dull blade, increase tension, adjust blade guides, reduce feed rate. |
| Blade drifts or wanders | Improper tracking, worn blade guides, dull blade, uneven tooth set. | Adjust tracking, replace worn guides, replace dull blade. |
9. 箱の中身
- 2 x 2095mm Bandsaw Blades (selected width and TPI)
10. 保証とサポート
Your bandsaw blades come with the following assurances:
- 30 Day 100% Satisfaction Guaranteed: If you are not completely satisfied with your purchase, you may return it within 30 days.
- No Hassle Return Policy: We offer a straightforward return process for your convenience.
さらにサポートやお問い合わせが必要な場合は、購入が行われたプラットフォームを通じて販売者に直接ご連絡ください。