導入
This manual provides instructions for the proper setup, operation, and maintenance of your evernice Foot Control Pedal. This high-quality foot control and cord set is designed for use with various sewing machine models, offering precise speed control for your sewing and embroidery projects.
仕様
| 属性 | 詳細 |
|---|---|
| ブランド名 | evernice |
| タイプ | ミシン部品 |
| 使用 | 刺繍 |
| 材料 | プラスチック |
| セットタイプ | はい |
| 懸念される化学物質 | なし |
| 起源 | 中国本土 |
| 電気定格 | DC35V 最大3mA |
Plug Dimensions:
- Pin spacing (approx.): 7.91 mm
- Pin diameter (approx.): 2.284 mm
- Plug width (approx.): 9.89 mm
- Plug height (approx.): 9.84 mm
- Overall plug length (approx.): 17.46 mm
Compatible Sewing Machine Models
This foot control pedal is compatible with the following sewing machine models. Please ensure to compare the plug configuration with your machine's receptacle before connecting.
- Elna: 3230、7100
- Husqvarna Viking: Eden Rose 250M, 118 Emerald, 122 Emerald, 224 HuskyStar, Mega Quilter 1200, Tribute 140M, Tribute 145M
- Janome (Newhome): 1600P, 1600P-DB, 1600P-DBX, 1600P-QC, 2200, 4123, 6125QC, 625E Sewist, 7325 Magnolia, CE2200, CM2200, L392, Sew Precise
- ケンモア： 385.16231300、385.16231301
- Pfaff: 1200 Hobby Grand Quilter
- 歌手： 7100
Important: Some machine models may have changed foot control styles over their production years. Always compare the image of the 3-prong plug with your machine's input port to ensure compatibility.
セットアップ手順
- 互換性の確認: Before connecting, carefully examine the 3-prong plug on the foot control cord and compare it to the receptacle on your sewing machine. Ensure they match perfectly to avoid damage. Refer to the compatibility section and images provided.
- 電源を切る： Ensure your sewing machine is turned off and unplugged from the wall outlet before connecting the foot control.
- コードを接続する: Insert the 3-prong plug of the foot control cord firmly into the corresponding receptacle on your sewing machine.
- ペダルの位置: Place the foot control pedal on the floor in a comfortable position where you can easily operate it with your foot.
- 電源オン: Once the foot control is securely connected, plug your sewing machine back into the wall outlet and turn on the machine's power switch.
操作手順
The foot control pedal allows you to regulate the speed of your sewing machine. Pressing down on the pedal increases the sewing speed, while releasing it decreases the speed or stops the machine.
- 縫製を開始する: Gently press down on the foot control pedal to begin sewing. The harder you press, the faster the machine will sew.
- 制御速度: Vary the pressure on the pedal to achieve your desired sewing speed. Light pressure for slow, precise stitching; heavier pressure for faster sewing.
- 縫うのをやめる: Release pressure from the pedal to stop the machine.
メンテナンス
- クリーニング： Wipe the foot control pedal with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or immerse the pedal in water.
- コードのケア: Avoid kinking, twisting, or placing heavy objects on the cord. Store the cord neatly when not in use to prevent damage.
- ストレージ： Store the foot control in a dry, clean place away from extreme temperatures and direct sunlight.
- 検査： Periodically inspect the cord and plug for any signs of wear, fraying, or damage. If any damage is observed, discontinue use and seek a replacement.
トラブルシューティング
ペダルが反応しない:
- 接続を確認してください: Ensure the foot control cord is securely plugged into both the pedal and the sewing machine.
- 電源： Verify that the sewing machine is plugged into a working electrical outlet and the machine's power switch is on.
- 互換性: Double-check that the foot control is compatible with your specific sewing machine model and that the plug configuration matches.
一貫性のない速度制御:
- Clean Pedal: Ensure no debris is lodged in the pedal mechanism that might hinder smooth operation.
- Internal Wear: If the pedal is old or heavily used, internal components may be worn. Consider replacing the pedal if cleaning does not resolve the issue.
If troubleshooting steps do not resolve the issue, please contact the seller or a qualified sewing machine technician for assistance.
ユーザーのヒント
- Always ensure the foot control is placed on a stable, non-slip surface to prevent accidental movement during operation.
- Practice varying pressure on the pedal to gain fine control over your sewing speed, especially for intricate tasks.
- When not in use, unplug the foot control from the sewing machine and store it safely to prevent accidental activation or damage.
保証とサポート
For any questions regarding the product, technical support, or warranty information, please contact the seller directly through the platform where the purchase was made. Provide your order details and a clear description of the issue for prompt assistance.
