フーバー-ロゴ

フーバー パワー スクラブ XL カーペットと室内装飾用クリーナー

hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-PRODUCT

はじめに

  1. ハンドルを取り付けます。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG1
  2. タンクの側面にある MAX ラインまで水を入れます。 溶液ボトルの手順に従って、適切な量の溶液をタンクに追加します。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG2

どのように使用する

本体
  1. ペダルを使って操作します。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG3
  2. ゆっくりと前方に押し、引き金を引いて洗浄します。 トリガーを放し、ゆっくりとユニットを乾いたカーペットに戻します。 繰り返して、新しいセクションに移動します。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG4
床の上
  1. ホースアタッチメント。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG5
  2. ツールアタッチメント。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG6
  3. スプレー/スクラブ。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG7
クリーニングとメンテナンス
  1. 汚水タンクを外すhoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG8
  2. ノズルカバーを引っ張って取り外します。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG9
  3. ブラシを削除するには、足の側面にある両方のタブを押します。 ブラシを再挿入するには、カチッと音がするまで押し戻します。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG10
  4. ブラシを再度挿入し、ラッチがロックされるまでしっかりと押します。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG11
クイッククリーンモード
  1. クイック クリーン モードを開始するには、ノブを反時計回りに回します。 ノブを時計回りに開始位置まで回して、ディープ クリーン モードに戻ります。hoover-power-scrub-xl=-carpet-and-upholstery-cleaner-FIG12

ドキュメント/リソース

フーバー パワー スクラブ XL カーペットと室内装飾用クリーナー [pdf]ユーザーガイド
PSXL-QSG、パワー スクラブ XL、カーペットおよび室内装飾用クリーナー、パワー スクラブ XL カーペットおよび室内装飾用クリーナー、カーペット クリーナー、室内装飾用クリーナー

コメントを書く

あなたのメールアドレスは公開されません。 必須フィールドは、マークされています *