FUNSICLE Round Tubular Pool Instruction Manual

導入

This manual provides essential instructions for the safe setup, operation, and maintenance of your FUNSICLE Round Tubular Pool, Model 16839. Please read this document thoroughly before beginning assembly or using the pool. Proper installation and care will ensure a long lifespan for your pool and a safe swimming experience.

Image: The FUNSICLE Round Tubular Pool, Model 16839, shown with its protective cover installed. The pool features a brown woven-look exterior.

安全情報

警告： これらの安全上の注意事項に従わないと、重傷を負ったり死亡したりする可能性があります。

• お子様がプール内またはプールの近くにいるときは、常に大人の監督が必要です。
• プールに飛び込んだり飛び込んだりしないでください。水深が浅いため、飛び込むことはできません。
• Ensure all safety devices, such as the safety ladder and pool cover, are properly installed and functioning. After swimming, replace your safety devices and ensure they are functioning correctly.
• Keep children away from the pool when it is not in use.
• Do not allow running or rough play around the pool area.
• Keep electrical devices away from the pool.
• Regularly check the pool structure for any signs of damage or wear.
• Maintain proper water chemistry to prevent health issues.

パッケージ内容

Verify that all components listed below are present in your package before beginning assembly. If any parts are missing or damaged, contact customer support.

• FUNSICLE Round Tubular Pool Liner (Brown Woven Design)
• 耐久性のあるスチールフレームコンポーネント
• RX1000 Cartridge Filter Pump
• Type C Filter Cartridge
• 安全はしご
• Maintenance Kit (includes surface skimmer, bottom skimmer, telescopic pole)
• Protective Pool Cover
• グラウンドマット

Image: Components of the included maintenance kit, featuring a skimmer net, a vacuum head, and a telescopic pole for cleaning.

セットアップ手順

The FUNSICLE Round Tubular Pool is designed for quick and easy assembly without the need for special tools. Follow these general steps for installation:

1. サイトの選択: Choose a firm, level surface free from sharp objects, debris, or overhead obstructions. The area should be large enough to accommodate the pool and provide adequate space around it for safe access.
2. 地面の準備: Lay down the included ground mat on the selected site. Ensure the surface is completely flat and stable.
3. フレーム組み立て： Unpack all frame components. Follow the diagrams in the separate assembly guide (if provided) to connect the steel tubes and connectors. Ensure all connections are secure.
4. ライナーの取り付け: Carefully spread the pool liner inside the assembled frame. Ensure the drain plug is accessible and closed. Smooth out any wrinkles in the bottom of the liner.
5. プールを埋める: Begin filling the pool with water. As the water level rises, continue to smooth out wrinkles from the center outwards. Stop filling when the water reaches the recommended fill line.
6. フィルターポンプ接続: Connect the RX1000 cartridge filter pump according to its specific instructions. Ensure all hoses are securely attached and clampsが締められています。
7. はしごの組み立て: Assemble the safety ladder as per its instructions and place it securely against the pool wall.

Image: The FUNSICLE Round Tubular Pool in use, demonstrating its capacity for multiple swimmers.

操作手順

• フィルターポンプの操作: Operate the RX1000 cartridge filter pump daily for several hours to ensure proper water circulation and filtration. Refer to the filter pump manual for specific operating times based on pool usage and water conditions.
• 水の化学: Regularly test the pool water for pH, chlorine, and alkalinity levels using a pool test kit. Adjust chemicals as needed to maintain balanced water, which is crucial for swimmer safety and pool longevity.
• スキミング: Use the included surface skimmer to remove leaves, insects, and other debris from the water surface daily.
• プールカバー: Use the protective pool cover when the pool is not in use to prevent debris from entering the water and to reduce water evaporation.

メンテナンス

• フィルターカートリッジのクリーニング/交換: The Type C filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, depending on pool usage and water quality. A dirty filter reduces pump efficiency.
• ライナークリーニング: Use the bottom skimmer and telescopic pole to vacuum or brush the pool floor and walls as needed to remove settled debris and algae.
• 水位: Ensure the water level is maintained between the minimum and maximum fill lines. Evaporation and splash-out can reduce the water level.
• 冬季： Before freezing temperatures arrive, drain the pool completely. Clean and dry all components thoroughly. Store the liner, frame, pump, and accessories in a dry, protected area to prevent damage.

トラブルシューティング

This section addresses common issues you might encounter. For more complex problems, consult the filter pump manual or contact customer support.

• 濁った水:
  • Check and clean/replace the filter cartridge.
  • Test water chemistry and adjust chlorine/pH levels.
  • フィルターポンプが毎日十分な時間稼働していることを確認します。
• ポンプが水を循環していない:
  • Ensure the pump is plugged in and receiving power.
  • Check for blockages in the skimmer, pump basket, or hoses.
  • Verify the filter cartridge is not excessively dirty.
  • Bleed air from the pump system if necessary (refer to pump manual).
• 水漏れ:
  • Inspect the liner for punctures or tears. Use a vinyl repair kit for small holes.
  • Check all hose connections and tighten clamps.
  • 排水プラグがしっかりと閉まっていることを確認してください。

仕様

Image: An illustrative diagram detailing the reinforced multi-layered PVC construction of the pool liner, highlighting its durability.

保証とサポート

This FUNSICLE pool comes with a 2-year availability of spare parts in the EU, indicating support for components. For warranty claims, technical assistance, or to order replacement parts, please contact the seller, Provence Outillage, or refer to the contact information provided with your purchase documentation.

For additional safety information, you may refer to the official safety document: 安全情報（PDF）.