Silonn SLICM63ST-US

Silonn Nugget Ice Maker SLICM63ST-US User Manual

Model: SLICM63ST-US | Brand: Silonn

1. はじめに

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Silonn Nugget Ice Maker. Please read this manual thoroughly before using the appliance and retain it for future reference.

2. 重要な安全上の注意事項

製氷機を使用する際に火災、感電、または怪我のリスクを減らすために、次の基本的な注意事項に従ってください。

  • 使用前にすべての指示をお読みください。
  • 適切に接地されたコンセントにのみ接続してください。
  • コード、プラグ、または機器のどの部分も水やその他の液体に浸さないでください。
  • いかなる機器も、子供が使用したり、子供の近くで使用したりする場合には、厳重な監視が必要です。
  • 使用しないとき、部品の取り付けや取り外しの前、および清掃の前には、必ずコンセントからプラグを抜いてください。
  • コードやプラグが損傷している機器、または機器が故障したり何らかの損傷を受けたりした後は、機器を操作しないでください。
  • 屋外では使用しないでください。
  • 高温のガスバーナーや電気バーナーの上や近く、または加熱されたオーブンの中に置かないでください。
  • 飲料水のみを使用してください。
  • 本来の用途以外には使用しないでください。

3. 箱の中身

  • 製氷機
  • アイスバスケット
  • アイススクープ
  • ユーザーマニュアル

4. 仕様

特徴詳細
ブランドサイロン
モデル名SLICM63ST-US
製品寸法奥行き16.38インチ x 幅6.69インチ x 高さ13.46インチ
容量1.8リットル(水タンク)
ワットtage145ワット
巻tage120ボルト
冷媒R600a
材質タイプステンレス鋼
毎日の氷の生産量最大40ポンド/24時間
First Ice Cycle8 minutes

5. セットアップ

  1. 開梱: Carefully remove the ice maker from its packaging. Ensure all components listed in "What's in the Box" are present. Remove any protective film or tape.
  2. 配置: Place the ice maker on a flat, stable surface away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit. The ultra-slim design (6.69"W) allows it to fit on most countertops.
    Silonn Nugget Ice Maker with dimensions 6.7 inches wide, 16.4 inches deep, and 13.5 inches high, next to a toaster and another appliance, highlighting its compact size.

    Figure 5.1: The Silonn Nugget Ice Maker's compact dimensions, ideal for countertop placement.

  3. 初期クリーニング: 初めてご使用になる前に、製氷機内部を清掃してください。清掃手順の詳細については、「メンテナンス」セクションをご覧ください。
  4. 水タンクに水を入れる: Pull out the removable water tank located at the front. Fill it with potable water up to the MAX line. Distilled or purified water is recommended to prevent mineral buildup.
    A person refilling the removable water tank of the Silonn Nugget Ice Maker at a kitchen sink.

    Figure 5.2: Refilling the removable 1.8L water tank.

  5. 接続電源: 製氷機をアース付き電源コンセントに差し込みます。

6. 操作手順

  1. コントロールパネルオーバーview: The ice maker features an ergonomic, large control panel with intuitive icons for easy operation.
    Close-up of the Silonn Nugget Ice Maker's control panel showing icons for 'ICE FULL', 'ADD WATER', 'CLEAN', and 'ICE/CLEAN' buttons.

    Figure 6.1: Intuitive control panel for the Silonn Nugget Ice Maker.

  2. 氷を作る:
    • 水タンクが満たされていることを確認してください。
    • Press the "ICE" button once to activate the ice-making function. The indicator will illuminate white.
    • The first batch of nugget ice will be ready in approximately 8 minutes. The machine can produce up to 40 lbs of ice per day.
    • The "ICE FULL" indicator will light up when the 1.2L ice storage bin is full.
    • The "ADD WATER" indicator will light up when the water tank needs refilling.
  3. 氷の分配:
    • Place your cup under the ice dispenser.
    • Press the ice dispensing button (cup icon) once to start dispensing ice automatically.
    • Press the button again to stop dispensing. This auto-drop ice technology ensures hygienic ice access without scooping.
    Silonn Nugget Ice Maker dispensing ice directly into a glass, highlighting the hygienic auto-drop feature.

    Figure 6.2: Hygienic ice dispensing directly into your cup.

7. メンテナンス

  1. セルフクリーニング機能:
    • Ensure the water tank is filled with clean water (or a vinegar solution for descaling).
    • Press and hold the "Clean" button (power button for 5 seconds) for 5 seconds to activate the 20-minute self-cleaning process. The cleaning indicator will light up.
    • After the cycle, drain the water from the machine using the drainage tubes located at the back.
    Diagram showing the internal components of the Silonn Nugget Ice Maker with labels for 'Effortless Cleaning' and 'Maintain Fresh' features.

    図7.1:内部 view highlighting the self-cleaning mechanism.

  2. 手動クリーニング:
    • 機器のプラグを抜いてください。
    • Remove the water tank and top cover for easy access to the interior.
    • Clean all accessible parts with a soft cloth and mild detergent. Rinse thoroughly.
    • 再組み立ておよび操作する前に、すべての部品が乾いていることを確認してください。
  3. Draining the Machine:
    • Locate the drainage tubes at the back of the unit.
    • Place a container under the tubes or direct them into a sink.
    • Remove the plugs from the tubes to drain the water.
    • Once drained, replace the plugs securely.

8。 トラブルシューティング

If you encounter any issues with your Silonn Nugget Ice Maker, please refer to the following common troubleshooting steps before contacting customer support.

問題考えられる原因解決
製氷機が氷を製造しません。水タンクが空です。水タンクを補充してください。
「ADD WATER」インジケーターが点灯しています。水位が低い。タンクに水を入れます。
「ICE FULL」インジケーターが点灯しています。製氷容器がいっぱいです。容器から氷を取り除きます。
氷は分配されていません。Ice bin is empty or dispenser is jammed.Check ice level, clear any obstructions, or restart dispensing.
動作中に異常な音がする。通常の動作音(コンプレッサー、ウォーターポンプ)またはユニットが水平ではありません。ユニットが水平な場所に設置されていることを確認してください。ノイズが持続し、異常な場合は、サポートにお問い合わせください。

9. 公式製品ビデオ

Silonn Ice Maker: Exploring All Your Ice Types

This video demonstrates the various types of ice that Silonn ice makers can produce, including nugget, bullet, and clear ice, showcasing their versatility for different beverages.

10. 保証とサポート

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Silonn webサイトでご確認ください。購入証明として購入レシートを保管してください。

連絡先:

  • Webサイト: Silonn Official Store
  • カスタマーサービス:製品パッケージまたは公式 web最新の連絡先情報については、サイトをご覧ください。

© 2026 Silonn. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.