1.製品オーバーview
The Baseus EnerFill FE11 is a high-performance 100W multi-port charger designed for rapid and efficient charging of various electronic devices, including laptops, tablets, and smartphones. It features two USB-C ports and one USB-A port, allowing for simultaneous charging of up to three devices. Its compact design and advanced safety features make it an ideal power solution for both travel and daily use.
画像: 斜め view of the Baseus EnerFill FE11 100W charger, highlighting its two USB-C and one USB-A output ports.
2. セットアップ手順
- 電源に接続: Plug the charger into a standard wall outlet. Ensure the outlet provides the correct voltage as specified in the product specifications.
- デバイスを接続する: Use appropriate charging cables (not included) to connect your devices to the charger's USB-C or USB-A ports. For optimal fast charging, use cables that support high power delivery.
- 充電の確認: Once connected, your device should indicate that it is charging. The charger will intelligently distribute power based on the connected devices' requirements.
3. 操作手順
3.1 同時充電
The EnerFill FE11 charger supports charging up to three devices concurrently. The power output will be dynamically allocated across the ports based on the connected devices' power demands. For example, a laptop may receive 65W, a tablet 20W, and a smartphone 15W when all three are connected.
Image: Illustration of the charger powering a laptop (65W), tablet (20W), and smartphone (15W) simultaneously.
3.2 急速充電機能
The charger delivers up to 100W of power through its USB-C ports, enabling rapid charging for compatible laptops. For instance, a 16-inch MacBook Pro (M4) can be charged to 100% in approximately 1.77 hours using a USB-C port.
Image: The charger connected to a laptop, demonstrating 100W maximum power delivery via USB-C.
3.3 ユニバーサルな互換性
The EnerFill FE11 supports multiple fast charging protocols, including PD3.0, QC3.0, and PPS, ensuring broad compatibility with a wide range of devices. This includes various models of smartphones, tablets, and laptops from different manufacturers.
Image: Visual representation of the charger's compatibility with smartphones (e.g., iPhone, Samsung), tablets (e.g., iPad), laptops (e.g., MacBook, Dell), and other devices (e.g., AirPods, DJI drones).
4. 安全機能
The charger incorporates advanced safety mechanisms, including polymer silicon-based heat dissipation and intelligent temperature control (BCT technology). These features effectively prevent overheating during prolonged use, protecting both the charger and your connected devices, thereby extending battery life.
画像: 分解図 view illustrating the polymer silicon-based heat dissipation layers within the charger.
5. 携帯性
Designed for convenience, the EnerFill FE11 features a compact and lightweight form factor, making it highly portable. It is up to 43% smaller than traditional chargers, ideal for travel and remote work. Its scratch-free design ensures durability during transport.
Image: Comparison showing the charger's compact size relative to other chargers, and a hand holding the device to emphasize its portability.
6. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル名 | EnerFill FE11 |
| ブランド | ベースス |
| 出力電力 | 100ワット（最大） |
| ポート | USB-C x 2、USB-A x 1 |
| 対応デバイス | Laptops, Tablets, Smartphones, etc. |
| サポートされているプロトコル | PD3.0, QC3.0, PPS |
| 寸法（長さ×幅×高さ） | 10 x 8 x 10 cm（おおよそ） |
| モデル番号 | YG01010003054 |
7。 トラブルシューティング
- デバイスが充電されない:
- 充電器が機能している電源コンセントにしっかりと差し込まれていることを確認してください。
- Check that the charging cable is properly connected to both the charger and the device.
- Verify that the charging cable is not damaged and supports the required power delivery.
- 別のポートまたはケーブルを試してください。
- 遅い充電:
- Ensure your device and cable support fast charging protocols (PD, QC, PPS).
- If multiple devices are connected, the power output is shared. Disconnect less critical devices to prioritize charging for a specific device.
- Check the device's charging input requirements; some devices may not draw full 100W.
- 充電器の過熱:
- While the charger has built-in temperature control, excessive heat can occur in poorly ventilated areas or under heavy load. Ensure adequate airflow around the charger.
- If the charger becomes excessively hot, disconnect it from the power source and all devices, and allow it to cool down before reuse.
8. メンテナンス
- クリーニング： 清掃する前に、充電器をコンセントから抜いてください。表面は柔らかく乾いた布で拭いてください。液体クリーナーや研磨剤は使用しないでください。
- ストレージ： Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it in humid environments.
- 取り扱い： 充電器を落としたり、強い衝撃を与えたりしないでください。充電器をご自身で分解したり修理したりしないでください。
9. 保証とサポート
For information regarding warranty coverage, technical support, or service, please refer to the official Baseus webご購入いただいた店舗までお問い合わせいただくか、ウェブサイトをご覧ください。保証請求の際は購入証明としてレシートを保管してください。