導入
Thank you for choosing the Lydsto WL07 Max Robotic Window Cleaner. This device is designed to provide efficient and thorough cleaning for various glass surfaces, including windows, mirrors, and tiles. With its intelligent navigation, powerful suction, and automatic spray system, maintaining sparkling clean surfaces has never been easier. Please read this manual carefully before use to ensure proper operation and maintenance.
以上view of the Lydsto WL07 Max Robotic Window Cleaner, highlighting its advanced features such as anti-slip chassis, corner sensors, and ultra-thin design.
パッケージ内容
Before starting, please verify that all items are present in the package.
The package includes the Lydsto WL07 Max robot, remote control, power adapter, safety rope, cleaning pads, and user manual.
- Lydsto WL07 Max Robotic Window Cleaner
- リモートコントロール
- 電源アダプター
- 安全ロープ
- Microfiber Cleaning Pads (2 pairs)
- 水スプレーボトル
- ユーザーマニュアル
安全上の注意
安全な操作を確保し、損傷を防ぐために、次の安全ガイドラインを守ってください。
- Always attach the safety rope to a secure anchor point before operating the robot, especially on high windows.
- Ensure the power cable is securely connected and not tangled.
- ひび割れや損傷のあるガラスの表面ではロボットを使用しないでください。
- Keep children and pets away from the operating robot.
- 雨天時や極度に湿度の高い環境ではロボットを使用しないでください。
- The backup battery provides temporary power during power outages; it is not for cordless operation.
設定
- クリーニングパッドを取り付ける: Securely attach the microfiber cleaning pads to the bottom of the robot. Ensure they are properly aligned.
Image illustrating the attachment of the main cleaning mop to the robot's base.
- Install Corner Brushes: Install the small blue corner brushes onto the designated corner slots.
Image showing how to install the small blue corner brushes.
- 水タンクを満たす: Open the water tank caps and fill both 110ml tanks with appropriate window cleaning solution or distilled water. Close the caps securely.
Image demonstrating the process of filling the robot's dual water tanks.
- 接続電源： Connect the power adapter to the robot and then plug it into a power outlet.
Image showing the power cable being connected to the robot.
- 安全ロープを取り付ける: Securely attach the safety rope to the robot and then to a sturdy object indoors, such as a heavy piece of furniture or a window frame.
Image demonstrating the attachment of the safety rope to the robot and a secure anchor.
操作手順
クリーニングサイクルの開始
- ロボットを配置: Place the robot on the glass surface you wish to clean. Ensure it is flat against the surface.
- 電源オン: Press the power button on the robot or the remote control to turn it on. The robot will adhere to the glass using its suction.
Image showing the user pressing the power button on the robot to initiate operation.
- モードの選択： Use the remote control to select a cleaning mode.
Diagram of the remote control with explanations for each cleaning mode and function.
- Automatic Cleaning (1x): For daily maintenance. The robot follows a Z or N path depending on window width.
- Deep Cleaning (2x): For heavily soiled windows. The robot performs a double pass.
- エッジクリーニング： Focuses on cleaning the edges of the window. Spraying is off by default.
- Localized Cleaning: Cleans a specific area. Spraying is off by default.
- 手動制御： Use the directional arrows to guide the robot.
- Auto Spray On/Off: Toggles the automatic water spray function.
- 手動スプレー: Activates a single spray.
- クリーニングを開始します: Press the Start/Pause button on the remote to begin the cleaning cycle.
- 完了： The robot will emit an alarm when the cleaning cycle is complete. Carefully remove it from the glass.
ビデオデモンストレーション
This video demonstrates the Lydsto WL07 Max Robotic Window Cleaner in operation, showing its movement and cleaning process on a window.
メンテナンス
- クリーンマイクロファイバーパッド: After each use, remove the microfiber pads and wash them. They can be hand-washed or machine-washed with mild detergent. Ensure they are completely dry before reattaching.
- Empty Water Tanks: If any cleaning solution remains, empty the tanks and rinse them with clean water.
- センサーを清掃する: Periodically wipe the sensors on the robot's underside with a dry, soft cloth to ensure optimal navigation and edge detection.
- 適切に保管してください: ロボットを使用しないときは、直射日光を避けて涼しく乾燥した場所に保管してください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ロボットはガラスに付着しません。 | Insufficient suction; dirty pads; uneven surface. | Ensure power is connected. Clean or replace pads. Ensure surface is flat. |
| ロボットが縞模様を残します。 | Pads are too dirty or too wet; incorrect cleaning solution. | Replace or clean pads. Use less solution or a different type. Perform a dry pass after a wet pass. |
| ロボットが突然停止します。 | Power interruption; low backup battery; obstacle detected. | Check power connection. Allow backup battery to charge. Remove any obstacles. |
| リモコンが機能しない。 | 電池切れ、障害物。 | Replace remote control batteries. Ensure no obstruction between remote and robot. |
仕様
- モデル名: WL07Max
- ブランド： リドスト
- 吸引力: 8000Pa
- 寸法（長さ×幅×高さ）： 21.5 x 21.5 x 5.5 cm（8.46 x 8.46 x 2.17インチ）
- 重さ： 2.8 kg (6.17 ポンド)
- 水タンク容量: 110 ml (dual tanks)
- 電池のタイプ： リチウムイオン
- Backup Battery Duration: >20 minutes (with alarm)
- 巻tage: 14.8ボルト
- 清掃経路幅: 22 cm (8.66 インチ)
- 制御方法: リモートコントロール
- 特別な機能: Ultra-thin design, Intelligent Navigation, Automatic Spray, Edge Cleaning, Corner Brushes
- 推奨表面: Windows, glass, tiles, mirrors
- 騒音レベル: 約65dB
保証情報
The Lydsto WL07 Max Robotic Window Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Lydsto web詳細な利用規約については、ウェブサイトをご覧ください。保証請求の際は、購入証明としてレシートを保管してください。
カスタマーサポート
For technical assistance, troubleshooting, or general inquiries, please contact Lydsto customer support.
- Webサイト： Visit the official Lydsto webFAQ とサポート リソースのサイト。
- メールアドレス: 具体的なサポート メール アドレスについては、製品のパッケージまたは保証書を参照してください。
- 電話： Check the Lydsto web地域のカスタマー サービス電話番号のサイト。
When contacting support, please have your product model (WL07Max) and purchase information ready.