diymore Battery Capacity Indicator DC7-100V (Style 1) User Manual

1. はじめに

The diymore Battery Capacity Indicator is a versatile digital display designed to monitor the voltage および充電率tage of various battery types. It supports a wide voltage range from 7V to 100V, making it suitable for 12V, 24V, 36V, 48V, 60V, 72V, and 84V battery systems. This device is compatible with lithium batteries, lead-acid batteries, and lithium iron phosphate (LiFePO4) batteries. Its clear color display provides real-time information on battery status.

Image: The diymore Battery Capacity Indicator (Style 1) displaying 24.40V and 100% charge, with a colorful battery bar.

2 製品の特徴

• 幅広い互換性: Suitable for lithium, lead-acid, and LiFePO4 batteries with voltages from 7V to 100V (12V, 24V, 36V, 48V, 60V, 72V, 84V).
• クリアなカラーディスプレイ: Provides clear readings of power and percentage.
• Six Setting Modes: Includes settings for lead-acid (P), lithium-iron (F), LiFePO4, custom high/low voltage, backlight adjustment, and low voltageアラーム。
• 簡単操作: Simple button presses for display control and entering settings.
• 電源オフメモリ: Energy-saving function with power-off memory.
• 逆極性保護： Designed to prevent damage from incorrect wiring.
• IP67防水等級: Provides protection against water ingress (note: not for prolonged submersion).

3. セットアップとインストール

3.1物理的寸法

Before installation, ensure the product dimensions are suitable for your intended mounting location.

Image: Diagram showing the dimensions of the battery capacity indicator: 63mm (2.48in) length, 34mm (1.34in) width, and 15mm (0.59in) depth. Also shows close-ups of the wiring connector and back vents.

3.2 配線接続

Connect the indicator to your battery system. The device features reverse polarity protection to prevent damage from incorrect wiring. Ensure proper connection for both series and parallel battery configurations.

Image: Wiring diagrams illustrating how to connect the battery capacity indicator to batteries in series and parallel configurations. The diagram highlights reverse polarity protection.

4. 操作手順

4.1 基本操作

• 電源オン/オフ: Briefly press the "PWR" button on the main side to turn the display on or off.
• 設定モードに入る: Press and hold the "SET" button for 2 seconds to enter the mode setting function page.

4.2 Mode Setting Instructions

The device offers several setting modes to configure it for different battery types and preferences.

Image: A visual guide listing the available mode settings: Acid battery P measurement, Ternary lithium battery L measurement, Fe lithium battery F measurement, Custom voltage setting, Low voltage alarm setting, and Backlight setting.

4.2.1 Acid Battery (P) Measurement Setting

1. On the main page, press and hold the "SET" button for 2 seconds to enter the mode setting function page for lead-acid battery settings.
2. The display will show "SET-12 P" (for a 12V lead-acid battery).
3. Short press the "PWR" button to make the number flash, then short press the "PWR" button again to select the required lead-acid battery voltage (12V, 24V, 36V, 48V, 60V, 72V, 84V).
4. ボリュームを選択したらtage, short press the "SET" button to confirm (the number will light up and save after confirmation).
5. Press and hold the "SET" button for 2 seconds again to return to the main page. The setting is now complete.

Image: The display showing "SET-12 P" with detailed steps for configuring the indicator for lead-acid batteries.

4.2.2 Ternary Lithium Battery (L) Setting

1. On the main page, press and hold the "SET" button for 2 seconds to enter the mode setting function page.
2. Short press the "SET" button to select the ternary lithium battery setting page: "SET-03L" (for a ternary lithium battery with 3 strings).
3. Short press the "PWR" button to make the number flash, then short press the "PWR" button again to select the required number of ternary lithium battery strings (03/04/05...19/20 strings).
4. After selecting the number of strings, short press the "SET" button to confirm (the number will light up and save after confirmation).
5. Long press the "SET" button for 2 seconds again to return to the main page. The setting is now complete.

Image: The display showing "SET-03 L" with detailed steps for configuring the indicator for ternary lithium batteries.

4.2.3 Lithium Iron (F) Battery Setting

1. On the main page, press and hold the "SET" button for 2 seconds to enter the mode setting function page.
2. Short press the "SET" button to select the iron-lithium battery setting page: "SET-03 F" (for an iron-lithium battery with 3 strings).
3. Short press the "PWR" button to make the number flash, then short press the "PWR" button again to select the required number of iron-lithium battery strings (03/04/05...24/25 strings).
4. After selecting the number of strings, short press the "SET" button to confirm (the number will light up and save after confirmation).
5. Long press the "SET" button for 2 seconds again to return to the main page. The setting is now complete.

Image: The display showing "SET-03 F" with detailed steps for configuring the indicator for lithium iron batteries.

4.2.4低巻tageアラーム設定

1. On the main page, press and hold the "SET" button for 2 seconds to enter the mode setting function page.
2. Short press the "SET" button to select the low voltage alarm setting page: "00.00V" (low voltage alarm setting mode).
3. Short press the "PWR" button to make the number flash, then short press the "SET" button to adjust the value.
4. Short press the "PWR" button to switch between digits for setting.
5. After all 4 digits are set, press and hold the "SET" button for 2 seconds to confirm (all 4 digits will remain lit and saved).
6. Press and hold the "SET" button for 2 seconds again to return to the main page. The setting is now complete.

Image: The display showing "00.00V" with a lightning bolt icon and a low battery symbol, along with detailed steps for configuring the low voltageアラーム。

5. メンテナンス

The diymore Battery Capacity Indicator is designed for durability and features an IP67 waterproof rating. However, proper care is essential for its longevity.

• 耐水性: The device is waterproof, but it should not be exposed to water for prolonged periods or submerged.
• クリーニング： 柔らかく乾いた布を使用してディスプレイとcを清掃してください。asing. 研磨剤入りの洗剤や溶剤は使用しないでください。
• ストレージ： Store the device in a dry environment when not in use.

Image: The battery capacity indicator shown with water droplets, indicating its IP67 waterproof rating. A note warns against prolonged water exposure.

6。 トラブルシューティング

If you encounter issues with your diymore Battery Capacity Indicator, please refer to the following common troubleshooting steps:

• 表示なし:
  • すべての配線接続が確実に固定され、正しく極性化されていることを確認します。
  • バッテリーの容量を確認しますtage is within the operating range of 7V-100V.
  • Ensure the "PWR" button has been pressed to turn on the display.
• 間違った読み方:
  • 正しい電池の種類と容量を確認してくださいtage/string settings have been configured in the settings menu (refer to Section 4.2).
  • バッテリー容量をテストするtage with a separate multimeter to cross-reference readings.
• 設定が保存されない:
  • Ensure you press and hold the "SET" button for 2 seconds to confirm and save settings after making changes.

問題が解決しない場合は、カスタマー サポートに連絡してサポートを受けてください。

7. 仕様

8. アプリケーション

This battery capacity indicator is suitable for a wide range of applications where battery monitoring is essential, including:

• Electric Motorcycles
• オートバイ
• ゴルフカート
• 自動車
• RVs (Recreational Vehicles)
• ボート
• フォークリフト
• 太陽光発電システム
• Other DIY battery projects

Image: A collage showing the battery capacity indicator in the center, surrounded by images of a forklift, truck, RV, golf cart, and boat, illustrating its diverse applications.

9.サポートと保証

diymore is committed to meeting your expectations with high-quality products and reliable customer service.

• 品質保証： Products are manufactured with best quality and safest processing.
• テクニカルサポート： A professional team of technicians is available for support.
• 顧客サービス： Dedicated customer service is provided for any inquiries or issues.

Image: A banner displaying the diymore logo and the text "OUR PROMISE TO YOU: Meeting Your Expectations," with icons representing production quality, safety, and professional customer service.