EvoFox Blaze 2 Wireless Gaming Mouse User Manual

導入

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EvoFox Blaze 2 Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.

Image: The EvoFox Blaze 2 Wireless Gaming Mouse, showcasing そのデザイン。

パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• 1 × EvoFox Blaze 2 Tri Mode RGB Programmable Wireless Gaming Mouse
• 1 × Nano Receiver (for 2.4GHz wireless connectivity)
• 1 × Type-C Braided Charging Cable with EMI Ring (1.5m)
• 1 × ユーザーマニュアル（本書）
• 1 × Warranty & Registration Flyer

設定

マウスの充電

Before initial use, fully charge the mouse using the provided Type-C braided charging cable. Connect the Type-C end to the mouse and the USB-A end to a powered USB port on your computer or a USB wall adapter.

Image: The EvoFox Blaze 2 mouse connected via its Type-C charging cable.

接続モード

The EvoFox Blaze 2 supports three connectivity modes:

1. 有線モード： Connect the mouse directly to your computer using the Type-C cable. This mode offers the lowest latency (<1ms) and charges the mouse simultaneously.
2. 2.4GHzワイヤレスモード：
   • Insert the Nano Receiver into an available USB port on your computer.
   • Ensure the mouse is switched to 2.4GHz mode (usually indicated by a switch on the bottom of the mouse).
   • The mouse should connect automatically. This mode offers ultra-low latency (<20ms).
3. Dual Bluetooth Mode (BTx2):
   • Switch the mouse to one of the Bluetooth modes (BT1 or BT2) using the switch on the bottom.
   • On your computer or device, search for Bluetooth devices and select "EvoFox Blaze 2" to pair.
   • You can pair with two different Bluetooth devices and switch between them. This mode offers low latency (<70ms).

Image: Diagram illustrating the three connectivity modes: Wired (Type-C), 2.4GHz Wireless (USB dongle), and Bluetooth (BTx2).

ソフトウェアのインストール

For full customization of DPI, polling rate, RGB lighting, and button mapping, download and install the dedicated EvoFox Blaze 2 software from the official EvoFox website. The software is required to unlock the mouse's full potential.

注記： The software detects the mouse only when connected via wired or 2.4GHz USB mode.

手術

DPI調整

The EvoFox Blaze 2 features an Instant S205 optical sensor with up to 12,800 DPI. You can cycle through preset DPI levels using the dedicated DPI buttons on the mouse. For fine-tuning and setting up to 6 custom DPI levels, use the comprehensive software.

Image: Visual representation of the 12,800 DPI sensor, polling rate, acceleration, FPS, and IPS specifications.

ポーリングレート

The mouse supports a 1000Hz polling rate, ensuring rapid response times. The polling rate can be adjusted via the software for specific needs.

プログラム可能なボタン

The mouse is equipped with 8 programmable buttons, including a dedicated fire button. Use the software to assign custom functions, macros, and key combinations to these buttons for enhanced in-game control and productivity.

Image: Close-up of the EvoFox Blaze 2 mouse highlighting the 8 programmable buttons, including the fire button.

RGB照明

The EvoFox Blaze 2 features customizable RGB lighting. Adjust lighting effects, colors, and brightness through the dedicated software to match your setup or mood.

画像: 詳細 view of the RGB lighting zones on the EvoFox Blaze 2 mouse.

ソフトウェアのカスタマイズ

The comprehensive software allows you to:

• Customize DPI levels and sensitivity.
• ポーリングレートを調整します。
• Program all 8 buttons.
• マクロを作成および編集します。
• RGB 照明効果をカスタマイズします。
• Save multiple user profileマウスのオンボード メモリに直接保存されます。

Image: Screenshot of the EvoFox Blaze 2 customization software interface, showing options for button mapping, DPI, and performance settings.

メンテナンス

バッテリー管理

The EvoFox Blaze 2 is equipped with a 500mAh rechargeable battery. To maximize battery life:

• バッテリーインジケーターに電力不足が表示されたら、マウスを充電してください。
• Utilize the smart power-saving features:
  • 起動維持モード： Activates after 1 minute of no movement.
  • ディープスリープモード： 10 分間操作しないとアクティブになります。
• These timers can be customized through the software.

Image: Illustration of the mouse's power-saving modes: Idle Mode and Deep Sleep Mode.

クリーニング

Wipe the mouse with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or internal components.

トラブルシューティング

• マウスが反応しない:
  • マウスが充電されていることを確認してください。
  • Check the connectivity mode switch (Wired, 2.4GHz, BT1, BT2) on the bottom of the mouse.
  • For 2.4GHz mode, ensure the Nano Receiver is securely plugged into a USB port.
  • For Bluetooth mode, ensure the mouse is paired correctly with your device.
  • 機能を確認するには、マウスを有線モードで接続してみてください。
• ソフトウェアがマウスを検出しない:
  • The software only detects the mouse when connected via wired or 2.4GHz USB mode. Ensure you are using one of these modes.
  • ソフトウェアまたはコンピュータを再起動します。
• 断続的な接続:
  • Ensure there are no strong interference sources (e.g., other wireless devices, large metal objects) near the mouse or receiver.
  • For 2.4GHz, try plugging the Nano Receiver into a different USB port, preferably a front-facing one if using a desktop.
  • マウスのバッテリーが十分に充電されていることを確認してください。
• RGB 照明の問題:
  • Ensure the software is installed and running, and check RGB settings.
  • Some lighting modes may consume more battery; ensure the mouse is charged.

仕様

画像: 上view of the mouse's durable and ergonomic build, highlighting features like detachable cable, switch life, programmable buttons, and lightweight design.

保証とサポート

Your EvoFox Blaze 2 Wireless Gaming Mouse comes with a warranty. Please refer to the included Warranty & Registration Flyer for detailed information regarding warranty terms, conditions, and registration procedures.

For technical support or service inquiries, please contact EvoFox customer support. Contact details can typically be found on the official EvoFox webサイトまたは保証書に記載されています。

メーカー: アライドエレクトロニクス＆マグネティクス株式会社

輸入業者/梱包業者: Allied Electronics & Magnetics Private Limited C-64/4, Okhla Phase - 2, New Delhi - 110020