BLUETTI Charger 2 1200W Alternator and DC-DC Charger User Manual

1. はじめに

The BLUETTI Charger 2 is a versatile 1200W alternator and DC-DC charger designed to efficiently power your portable power stations and solar generators. It features dual input capabilities, allowing charging from both your vehicle's alternator and solar panels. This device offers up to 13 times faster charging compared to a standard car cigarette lighter socket and includes emergency jump-start functionality for your vehicle's battery. It also incorporates advanced voltage monitoring to prevent car battery discharge.

Image: The BLUETTI Charger 2 main unit, a compact gray device with ventilation grilles.

2. 箱の中身

開梱時にすべてのアイテムが揃っていて良好な状態であることを確認してください。

• BLUETTI Charger 2 (Alternator and DC-DC Charger)
• Car Battery Cable
• Power Station Cable Kit
• MC4 Input Cable
• Bidirectional Power Cable
• 75Aヒューズ
• セルフタッピングねじ
• ユーザーマニュアル

Image: All components included with the BLUETTI Charger 2, laid out on a white surface.

3. 安全情報

安全な操作を確保し、損傷を防ぐために、次の安全ガイドラインを読んで遵守してください。

• Always wear personal protective equipment (PPE) such as gloves and safety glasses during installation.
• Avoid high temperatures, sharp edges, or friction points when routing cables.
• Ensure all screws and connections are tightened securely to prevent wear or loose connections.
• Turn off your vehicle or use the app to disable the Charger 2 before changing any cables.
• Ensure positive and negative terminals are correctly matched during connection.
• Use the BLUETTI DC input cable or a compatible one with a 60A circuit breaker for safety.
• Do not connect the Charger 2 ports to an AC outlet.
• When using a power station, follow its user manual for proper usage and storage.
• Switch off the vehicle before any electrical work.
• 製品を水で洗浄しないでください。
• 製品を自分で分解しないでください。
• Keep the product away from heat sources and high temperatures.
• Avoid use in areas with fire, explosive gases, or smoke.
• Store away from flammable or explosive materials.
• Do not use in saline or humid environments.
• Do not insert foreign objects into any ports or ventilation openings.
• 製品の中に指や手を入れないでください。
• Avoid contact with metallic objects during operation.
• Ensure the product is completely dry before use.
• Use in a clean and well-ventilated area.
• Devices must be installed or serviced only by qualified technicians.
• Use only BLUETTI cables and accessories.
• Do not use if cables or outlets are damaged.
• Pull the plug, not the cable, when disconnecting.
• Immediately deactivate the circuit breaker in case of malfunction.
• Regularly check the product and its accessories for damage or deterioration. If the product shell is cracked, do not use it and contact BLUETTI support.
• Keep children, pets, insects, and other animals away from the product.
• This product is designed for exclusive use with IT/AV products.

4. セットアップとインストール

Follow these steps to install your BLUETTI Charger 2. For a visual guide, please refer to the installation video below.

4.1. インストールの準備

1. Ensure your vehicle is turned off and the battery is in good condition.
2. Verify your car battery is compatible with the Charger 2 (should be a standard 12V or 24V car battery, or two 12V batteries connected in series).
3. Confirm that the Charger 2's output voltage (15-56V) matches the DC input voltage range of your power station. Use a compatible adapter if necessary.
4. Gather all necessary tools: gloves, screwdriver, wrench, utility knife, and zip ties.

4.2.ケーブルを接続します

1. Mount the Charger 2: Choose a suitable location in your vehicle (e.g., trunk, under a seat) and secure the Charger 2 using the provided self-tapping screws or zip ties.
2. Connect Input Cables to Charger 2:
   • Unscrew the base and lift the cover of the Charger 2.
   • Connect the red cable (BAT+) to the 'Input+' terminal and the black cable (BAT-) to the 'Input-' terminal on the Charger 2.
   • Tighten the screws using the provided hex key to secure the connections.
3. Connect MC4 Output Cable to Charger 2:
   • Connect the red MC4 cable (Output+) to the 'Output+' terminal and the black MC4 cable (Output-) to the 'Output-' terminal on the Charger 2.
   • 付属の六角キーを使用してネジを締めます。
4. Connect Charger 2 to Power Station: Connect the MC4 output cable from the Charger 2 to the DC input port (e.g., INPUT/MPPT) of your BLUETTI power station. Ensure the power station is compatible with the Charger 2's output voltage.
5. Connect Charger 2 to Car Battery:
   • Route the car battery cable from the Charger 2 through the vehicle's firewall to the engine compartment. Locate an existing entry point or create a new one if necessary, ensuring proper sealing.
   • Connect the OT terminals of the car battery cable to your vehicle's battery terminals. Connect the red cable (BAT+) to the positive (+) terminal and the black cable (BAT-) to the negative (-) terminal. Securely tighten the connections.

画像: 詳細 view of connecting the input cables to the Charger 2 unit.

Image: Step-by-step connection of the Charger 2 cables to the vehicle's battery terminals.

4.3. Activate the Charger 2

1. 車のエンジンを始動します。
2. Activate the DC input circuit breaker (if included with your cable kit).
3. The Charger 2 will automatically detect the vehicle's alternator and begin charging. The green indicator light on the Charger 2 will flash rapidly during startup and then become solid green when charging successfully.

5. 操作手順

5.1. パワーステーションの充電

Once installed and activated, the BLUETTI Charger 2 will automatically charge your connected power station when the vehicle's engine is running. It utilizes both alternator and solar input (if solar panels are connected via the MC4 input cable) to provide up to 1200W of charging power.

5.2. Emergency Jump-Start

The Charger 2 can provide an emergency jump-start for your car battery. This function reverses the charging flow, using your BLUETTI power station or battery pack to deliver power to the car's starting battery. Refer to the BLUETTI app for specific settings and activation of this feature.

5.3. BLUETTI App Integration

The BLUETTI app allows for smart monitoring and control of your Charger 2. You can monitor input/output power, adjust charging voltage, and manage various settings directly from your smartphone.

1. Download the BLUETTI app from your device's app store (search for 'BLUETTI').
2. スマートフォンでBluetoothが有効になっていることを確認します。
3. Open the app and follow the on-screen instructions to bind your Charger 2.
4. Within the app, you can select your specific BLUETTI power station model. The app will automatically set the optimal charging voltagお使いのデバイスのe。

Image: Screenshot of the BLUETTI mobile app interface, displaying energy monitoring and control options for connected devices.

6. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your BLUETTI Charger 2.

• デバイスを清潔に保ち、ほこりやゴミを取り除いてください。清掃には乾いた柔らかい布を使用してください。
• 過熱を防ぐために、通気グリルが塞がれていないことを確認してください。
• Store the Charger 2 in a dry, well-ventilated area when not in use.
• すべてのケーブル接続部がしっかりと固定されているか、摩耗や損傷の兆候がないか定期的に点検してください。損傷したケーブルは直ちに交換してください。
• デバイスを極端な温度や直射日光に長時間さらさないでください。

7。 トラブルシューティング

If you encounter issues with your BLUETTI Charger 2, refer to the following common problems and solutions:

• デバイスの電源が入らない: Check all power connections. Ensure the vehicle engine is running and the DC input circuit breaker is activated.
• Not charging power station: Verify that the Charger 2's output voltage matches the power station's input requirements. Check all cable connections between the Charger 2 and the power station. Ensure the green indicator light on the Charger 2 is solid.
• アプリ接続の問題: Ensure Bluetooth is enabled on your phone and the Charger 2 is within range. Restart the app and try reconnecting.
• 過熱： Ensure the Charger 2 is in a well-ventilated area and its vents are not blocked. Reduce the load if possible.
• Car battery discharge: The Charger 2 is designed to prevent this. If you suspect discharge, ensure the D+ signal is correctly connected (for smart alternators) and the unit is properly installed.

問題が解決しない場合は、BLUETTI カスタマー サポートにお問い合わせください。

8. 仕様

9.保証とサポート

9.1. 保証情報

The BLUETTI Charger 2 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BLUETTI web保証の範囲と期間に関する詳細な条件については、サイトをご覧ください。

9.2. カスタマーサポート

For technical assistance, troubleshooting, or any questions regarding your BLUETTI Charger 2, please contact BLUETTI customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model and serial number ready.