導入
This manual provides instructions for the Donner RISING-G2 38-inch acoustic electric guitar. This instrument features a carbon fiber top, mahogany back and sides, and built-in electronics for amplified performance. Please read this manual thoroughly to ensure proper setup, operation, and maintenance of your guitar.
図1: 前面 view of the Donner RISING-G2 Acoustic Electric Guitar.
設定
1。 開梱と検査
Carefully remove the guitar and all accessories from the packaging. Inspect the instrument for any signs of damage. The package should include the guitar, extra strings, a cleaning cloth, picks, a scratch guard, and an Allen wrench for truss rod adjustments.
2. 弦の取り付けとチューニング
The guitar comes with strings pre-installed. For initial setup or string replacement, refer to standard guitar stringing procedures. The 18:1 ratio tuning gears provide precise tuning. Use the built-in tuner (see Operating Instructions) or an external tuner to tune the guitar to standard pitch (E-A-D-G-B-e).
3. Battery Installation for Pickups
The built-in pickup system requires a battery. Locate the battery compartment, typically inside the soundhole or near the output jack. Install the required battery type, ensuring correct polarity. This powers the EQ and tuner functions when the guitar is plugged in.
操作手順
1. Acoustic Playback
The RISING-G2 guitar can be played acoustically. Its carbon fiber top and mahogany body are designed to produce a balanced tone. The ergonomic body shape provides comfortable playability.
Figure 2: The RISING-G2 guitar is designed for comfortable playing.
2. Using the Built-in Pickup System
To use the electric features, connect a standard 1/4-inch guitar cable from the output jack (located at the end strap button) to an acoustic amplifier, mixer, or PA system. The guitar features a built-in 2-Band EQ, Phase Switch, and Tuner.
- 2バンドEQ： Adjust the "Bass" and "Treble" knobs to shape your amp生き生きとした口調。
- フェーズスイッチ: Use this switch to help reduce feedback, especially in live performance settings. Experiment with both positions to find the optimal sound.
- 内蔵チューナー: Activate the tuner to check and adjust your guitar's tuning. The display will guide you to the correct pitch.
Figure 3: Detail of the RISING-G2 pickup system controls.
メンテナンス
1. 清掃
Wipe down the guitar after each use with a soft, dry cleaning cloth (one is included). For deeper cleaning, use a guitar-specific cleaning solution. Avoid harsh chemicals that can damage the finish.
2. 文字列の置換
Replace strings regularly to maintain optimal tone and playability. The guitar uses Phosphor Bronze strings. When replacing, change one string at a time to maintain neck tension. The 18:1 ratio gears ensure smooth tuning after replacement.
3. トラスロッド調整
The neck of the guitar contains a truss rod that can be adjusted to correct excessive neck relief or back-bow. If you experience issues with string action or buzzing, a truss rod adjustment may be necessary. Use the provided Allen wrench. It is recommended that this adjustment be performed by an experienced technician if you are unfamiliar with the process.
4. 環境への配慮
While the carbon fiber top offers durability and stability, store the guitar in a stable environment, away from extreme temperature fluctuations and high humidity, to preserve the mahogany components and overall integrity of the instrument.
Figure 4: Carbon fiber bracing contributes to the guitar's stable tone and durability.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No Sound When Plugged In | Dead or incorrectly installed battery; faulty cable; ampリファイアオフ。 | Check and replace battery; ensure cable is fully inserted and functional; verify ampライフファイアのパワーと設定。 |
| 音質が悪い / フィードバック | Incorrect EQ settings; phase issue; proximity to amplifier。 | Adjust Bass/Treble on EQ; toggle Phase Switch; increase distance from amplifier。 |
| Difficulty Staying in Tune | Old strings; improper string winding; environmental changes. | Replace strings; ensure strings are properly wound around tuning posts; allow guitar to acclimate to environment. |
| 弦のバズ音 | Low string action; uneven frets; neck relief issues. | Check neck relief and adjust truss rod (consult a technician if unsure); inspect frets for wear. |
If problems persist after attempting these solutions, please contact customer support or a qualified guitar technician.
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ドナー |
| モデル名 | ライジングG2 |
| トップ素材 | カーボンファイバー |
| ボディ素材 | マホガニー |
| 裏素材 | マホガニー材 |
| ネック素材 | マホガニー |
| 指板の材質 | HPL |
| ピックアップ構成 | Piezo (Built-in 2-Band EQ, Phase Switch, Tuner) |
| 弦の素材 | リン青銅 |
| 文字列の数 | 6 |
| アイテム重量 | 1.6キログラム |
| 商品の寸法 (長さ x 幅 x 高さ) | 37.01 x 13.98 x 3.94インチ |
| Tuning Gears | 18:1 Ratio Sealed Nickel-Plated |
保証情報
Donner products are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Donner web保証条件の詳細については、ウェブサイトをご覧ください。保証請求の際は、購入証明書を保管してください。
カスタマーサポート
For technical assistance, troubleshooting, or warranty inquiries, please contact Donner customer support. Contact information can typically be found on the official Donner website or on the product packaging. When contacting support, please have your model number (RISING-G2) and proof of purchase available.
オンラインリソース: ドナーの公式ウェブサイトをご覧ください webFAQ、追加の製品情報、サポート リソースについては、こちらのサイトをご覧ください。