1. はじめに
Thank you for choosing the GOCHIFIX Auto Hat Heat Press Machine. This manual provides essential information for the safe and efficient operation of your new heat press. Please read all instructions carefully before use and retain this manual for future reference.
主な特徴:
- 自動操作: Features automatic open/release and pressure adjustment for hands-free operation.
- Precise Temperature & Timer Control: Digital panel for setting temperature (46-400℉/8-200℃) and time (0-999 seconds).
- 4 Memory Modes: Save frequently used settings for efficient workflow.
- 2-in-1の多用途性: Equipped with a 6.54"x3.84" curved heat plate and two interchangeable hat pads for various hat styles and small items.
- Wrinkle-Free Results: Adjustable hat stretcher and molded silicone lower platen ensure smooth transfers.
- 安全性の強化: Includes a 'Stop' button, anti-slip pads, built-in fuse with spares, and high-temperature gloves.
2. 安全に関する注意事項
火災、感電、および人身傷害のリスクを軽減するために、電気製品を使用するときは常に基本的な安全上の注意事項に従ってください。
- 機械を操作する前にすべての指示をお読みください。
- Keep the machine away from water or wet environments.
- Do not touch the heating plate during or immediately after operation as it will be hot. Use the provided high-temperature gloves.
- 機械が安定した耐熱性の表面に設置されていることを確認してください。
- マシンを使用しないとき、または掃除する前にはプラグを抜いてください。
- コードやプラグが損傷している状態で機械を操作しないでください。
- 操作中は子供やペットを機械から遠ざけてください。
- Use the emergency 'STOP' button to interrupt operation if necessary.
3. パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認します。
- GOCHIFIX Auto Hat Heat Press Machine
- Power Cord (Wire length 59.06")
- 1 Pair Silicone Heat-Resistant Gloves
- Children's Hat Pad (4.94" x 2.95")
- Adult Hat Pad (5.59" x 3.78")
- Spare Fuses (2 included)
- 取扱説明書
Figure 3.1: Included accessories with the heat press machine.
4.セットアップガイド
Follow these steps to prepare your heat press machine for first use:
- 開梱： パッケージからすべてのコンポーネントを慎重に取り出します。
- 配置: Place the heat press machine on a stable, flat, and heat-resistant surface. Ensure adequate ventilation around the machine.
- 電源接続: Connect the power cord to the machine's power interface and then plug it into a standard 110V electrical outlet.
- Hat Pad Installation: The machine comes with two interchangeable hat pads. Select the appropriate size for your project. To install, align the pad with the lower platen and secure it.
- 電源オン: Flip the power switch to the 'ON' position. The digital display will illuminate.
Figure 4.1: Initial setup showing power connection and hat placement.
5. 操作手順
This section details how to operate your GOCHIFIX Auto Hat Heat Press Machine.
5.1. 温度と時間の設定
- 電源オン: 電源スイッチを使用して本機の電源を入れます。
- アクセス設定: 'を押しますセット' button once. The temperature display will flash.
- 温度調整: 「+' そして '-' buttons to set the desired temperature (range: 46-400℉ / 8-200℃).
- 温度を確認: プレス 'セット' again. The time display will flash.
- 時間を調整: 「+' そして '-' buttons to set the desired time (range: 0-999 seconds).
- 時間を確認: プレス 'セット' one more time to save the settings and exit the setting mode.
- 温度単位変換： To switch between Fahrenheit (℉) and Celsius (℃), press and hold the 'セット' button to enter the password screen. Press and hold the '+' button to adjust the display value to 88, then click 'セット' to enter 'CF' mode. Continuously click 'セット' until you exit the setup page to complete the settings.
図5.1：詳細 view of the control panel for setting temperature and time.
5.2. Using Memory Modes
The machine features 4 memory modes to store your preferred temperature and time settings for different materials or projects.
- モードの選択： 'を押しますモード' button to cycle through the 4 available memory modes (P1, P2, P3, P4).
- 設定を保存: After setting your desired temperature and time (as described in 5.1), the machine will automatically save these settings to the currently selected mode.
- 設定の呼び出し: Simply select the desired mode using the 'モード' button to recall its saved temperature and time settings.
Figure 5.2: The control panel with memory mode selection.
5.3. Performing a Heat Transfer
- 準備するアイテム: Place the hat or item onto the lower platen, ensuring it is smooth and centered. Use the adjustable hat stretcher to secure the cap and prevent wrinkles.
- ポジション移転: Place your transfer material (sublimation paper, vinyl, etc.) onto the hat in the desired position.
- 温度を待つ: 設定温度に達するまでお待ちください。ディスプレイに現在の温度が表示されます。
- 押し始める: Once the set temperature is reached, press the '入力' button. The heating plate will automatically lower and apply pressure. The timer will begin counting down.
- 自動リリース: When the countdown finishes, a buzzer will sound, and the heating plate will automatically rise, releasin圧力をかける。
- アイテムを削除: Carefully remove the transferred item using the heat-resistant gloves.
Figure 5.3: Starting the heat press operation.
Figure 5.4: Automatic opening and buzzer alert after transfer.
5.4. 多用途なアプリケーション
The GOCHIFIX Auto Hat Heat Press Machine is suitable for various heat transfer processes and items:
- Hat Styles: Ideal for basketball caps, trucker hats, bucket hats, children's hats, adult size hats, and berets.
- Other Small Items: Can also be used for designs on canvas bags, shirt sleeves, neck tags, wrist straps, handkerchiefs, and pet clothing.
図5.5：例amples of items that can be customized with the heat press.
公式製品ビデオ：作戦終了view
This video demonstrates the general operation and features of the GOCHIFIX Auto Hat Heat Press Machine, including setup, temperature/time settings, and the automatic pressing process.
Official Product Video: Hands-Free Operation
This video highlights the hands-free capabilities of the GOCHIFIX heat press, showcasing its automatic open/release function and how it streamlines the heat transfer process.
6. メンテナンス
適切なメンテナンスを行うことで、ヒートプレス機の寿命が長くなり、最適なパフォーマンスが確保されます。
- クリーニング： After each use, ensure the machine is unplugged and completely cooled. Wipe the heating plate and other surfaces with a soft, dry cloth. For stubborn residue, use a mild cleaner specifically designed for non-stick surfaces. Avoid abrasive cleaners or harsh chemicals.
- ストレージ： 使用していないときは、機械を乾燥したほこりのない環境に保管してください。
- ヒューズの交換: If the machine overheats and the built-in fuse blows, replace it with one of the provided spare fuses. Refer to the fuse compartment for instructions on replacement.
7。 トラブルシューティング
ヒートプレスで問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| マシンの電源が入らない | Power cord not properly connected; Power switch off; Blown fuse. | Check power cord connection; Ensure power switch is ON; Replace fuse if blown. |
| 加熱プレートが加熱されない | Incorrect temperature setting; Heating element malfunction. | Verify temperature settings; Contact customer support if issue persists. |
| Transfer results are poor (fading, incomplete) | Incorrect temperature or time settings; Uneven pressure; Material incompatibility. | Adjust temperature/time according to transfer material guidelines; Ensure hat is securely placed; Use appropriate materials. |
| Machine does not open automatically | Mechanism obstruction; Sensor issue. | Check for any obstructions; Contact customer support. |
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ゴチフィックス |
| モデル | B0G4FGPZ9P |
| 材料 | アルミニウム、金属、シリコン |
| 色 | ピンク |
| 製品寸法（長さ x 幅 x 高さ） | 15.35インチ x 7.13インチ x 11.1インチ |
| 推奨用途 | 帽子 |
| 上限温度定格 | 華氏400度（摂氏200度） |
| 巻tage | 110ボルト |
| ワットtage | 500ワット |
| Curved Heat Plate Size | 6.54インチ×3.84インチ |
| Interchangeable Hat Pad Sizes | 5.59" x 3.78" (Adult), 4.94" x 2.95" (Children) |
9.保証とサポート
The GOCHIFIX Auto Hat Heat Press Machine comes with a 1年間保証. For warranty claims, technical support, or any inquiries, please contact GOCHIFIX customer service through the retailer where the product was purchased. Please have your model number (B0G4FGPZ9P) and purchase date available when contacting support.