1. はじめに
Thank you for choosing the HOMCOM King Bed Frame. This platform bed frame features an adjustable corduroy upholstered headboard, robust wood slat support, and a noise-free design for a comfortable sleep experience. This manual provides essential information for safe assembly, operation, and maintenance of your new bed frame.
Image 1.1: The HOMCOM King Bed Frame, showcasing its design and adjustable headboard.
2. 安全上の注意
- 最大積載量： Do not load more than 800 lbs (363 kg) on the bed frame. Exceeding this limit may cause damage or injury.
- ピンチポイント: Exercise caution around metal legs and the adjustable headboard mechanism to avoid pinch points or sharp edges during assembly and adjustment.
- 組み立て： Always follow the assembly instructions carefully. It is recommended that two adults assemble this bed frame.
- 定期点検: すべてのボルトと接続部がしっかりと固定されているか定期的に確認してください。
- 配置: 安定性を確保するために、ベッドフレームを水平な面に置いてください。
3. パッケージ内容
組み立てを始める前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足または損傷している場合は、カスタマーサポートにお問い合わせください。
- ヘッドボード（調節可能）
- Bed Frame Components (Side rails, footboard, center support)
- 木製スラット
- 金属脚
- ハードウェアパック（ボルト、ワッシャー、ナット、六角レンチ）
- インストールマニュアル
4. 組み立て手順
Assembly is designed to be straightforward with pre-marked parts and pre-assembled slats. Please follow the step-by-step instructions provided in the included installation manual. It is recommended to have two people for assembly.
- すべてのコンポーネントを開梱し、傷がつかないように清潔で柔らかい表面の上に広げます。
- Identify all parts using the parts list in the separate installation manual.
- 付属の金具を使用して、サイドレールをヘッドボードとフットボードに取り付けます。すべての主要部品が接続されるまで、ボルトを完全に締めないでください。
- Install the center support beam and its legs.
- Place the wood slats onto the frame. The hook-and-loop design ensures silent and stable support.
- Ensure all connections are secure and then fully tighten all bolts.
- Attach the non-slip foot pads to the bottom of the bed frame legs.
Image 4.1: Key features for noise-free operation and easy assembly, including hook-and-loop slat design, EVA pads, and non-slip foot pads.
5. 操作手順
5.1 調節可能なヘッドボード
The headboard of your HOMCOM bed frame can be adjusted to three different heights to accommodate various mattress thicknesses and personal comfort preferences.
- The available height settings are approximately 38.2 inches (97 cm), 40.2 inches (102 cm), and 42.1 inches (107 cm).
- To adjust, loosen the bolts connecting the headboard to the frame, slide the headboard to the desired height, and then securely tighten the bolts.
Image 5.1: Detail of the adjustable headboard, illustrating the three height options.
5.2 ノイズフリー設計
This bed frame is engineered for quiet operation:
- 木製スラット: The wood slats feature a hook-and-loop design to keep them securely in place, preventing movement and associated noise.
- EVAパッド: EVA pads are integrated on the central support post to eliminate squeaks from wood-on-metal contact.
- フットパッド: Non-slip foot pads further reduce noise and protect your flooring.
5.3 ベッド下のスペース
The bed frame provides approximately 6.3 inches (16 cm) of clearance underneath, allowing for easy cleaning, including access for robot vacuums.
Image 5.2: Illustration of the under-bed clearance, suitable for robot vacuums.
6. お手入れとメンテナンス
- クリーニング： Wipe the bed frame with a dry cloth to remove dust and debris. For the corduroy upholstery, use a soft brush or vacuum with an upholstery attachment to maintain its texture.
- 刺激の強い化学物質を避ける: Do not use abrasive cleaners or harsh chemicals, as these can damage the finish and fabric.
- こぼれ： In case of spills on the corduroy, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner.
- ファスナーを締めます: フレームが安定し、ノイズが発生しないように、すべてのボルトとネジを定期的に点検して締め付けてください。
Image 6.1: Detail of the corduroy upholstery, highlighting its texture and comfort.
7。 トラブルシューティング
- きしみ音: If the bed frame develops squeaks, first ensure all assembly bolts are securely tightened. Check that the wood slats are properly seated with the hook-and-loop fasteners. Verify that the EVA pads on the center support are intact and correctly positioned.
- 不安定： If the bed frame feels unstable, re-check all connections and ensure the frame is placed on a flat, level surface. Uneven flooring can cause wobbling.
- Headboard Adjustment Issues: If the headboard is difficult to adjust, loosen the connecting bolts slightly more before attempting to slide it. Ensure no fabric or debris is obstructing the adjustment mechanism.
8. 製品仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 83D-129V03LG |
| サイズ | 王 |
| 製品寸法（長さ x 幅 x 高さ） | 2.08L x 2W x 1.07H Meters (81.9"L x 78.7"W x 42.1"H) |
| 対応マットレスサイズ | 193 cm x 203 cm（76インチ x 79.9インチ） |
| 材料 | Metal, Polyester (Corduroy Headboard) |
| 色 | ライトグレー |
| 最大重量の推奨 | 363 kg (800 ポンド) |
| Adjustable Headboard Heights | 97 cm (38.2"), 102 cm (40.2"), 107 cm (42.1") |
| ベッド下のスペース | 16 cm（6.3インチ） |
| 組み立てが必要 | はい |
| 製品のお手入れ方法 | 乾いた布で拭いてください |
Image 8.1: Detailed dimensions and specifications of the King Bed Frame.
9. 保証情報
This HOMCOM King Bed Frame comes with a 90 Day Warranty Against Manufacturer Defectsこの保証は、通常の使用状況における材料および製造上の欠陥を対象としています。誤用、事故、不正な改造、または通常の摩耗や損耗による損傷は保証の対象外となります。保証請求の際は、購入証明書を保管してください。
10. カスタマーサポート
For any questions, concerns, or assistance with your HOMCOM King Bed Frame, please contact Aosom Canada customer support:
- メーカー: アオソムカナダ
- 位置： カリフォルニア州オンタリオ州マーカム
- 電話： 1-416-792-6088
Please have your model number (83D-129V03LG) and proof of purchase ready when contacting support.