Donner HHCB-12

Donner HHCB-12 Electronic Drum Hi-Hat Pad with Stand User Manual

Model: HHCB-12

導入

ご購入ありがとうございますasing the Donner HHCB-12 Electronic Drum Hi-Hat Pad with Stand. This product is designed to enhance your electronic drumming experience by providing a realistic hi-hat feel with a dedicated stand. This manual provides essential information for the proper setup, operation, and maintenance of your new hi-hat pad and stand. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

重要な安全情報

  • Always place the hi-hat stand on a stable, level surface to prevent tipping.
  • すべてのネジとamps are securely tightened before playing to prevent components from shifting or falling.
  • 製品を水、湿気、極端な温度から遠ざけて保管してください。
  • 製品を分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。
  • 窒息の危険を防ぐため、小さな部品は子供の手の届かないところに保管してください。
  • Use only the power adapter specified for your electronic drum module, if applicable, when connecting the hi-hat pad.

パッケージ内容

パッケージに以下のすべてのアイテムが含まれていることを確認してください。

  • Donner HHCB-12 Electronic Hi-Hat Pad (12-inch)
  • Hi-Hat Stand
  • Hi-Hat Clutch
  • 接続ケーブル
  • ユーザーマニュアル（このドキュメント）

セットアップ手順

Follow these steps to assemble and set up your Donner HHCB-12 Hi-Hat Pad and Stand:

1. Assemble the Hi-Hat Stand

  1. Unfold the tripod base of the hi-hat stand and ensure it is stable.
  2. Extend the lower tube of the stand to your desired height and secure it with the wing nut.
  3. Insert the upper tube into the lower tube. Do not tighten yet.
Assembled Donner HHCB-12 Hi-Hat Pad and Stand

Image: The Donner HHCB-12 Electronic Hi-Hat Pad mounted on its stand, ready for connection to an electronic drum module. The stand features a sturdy tripod base and a foot pedal.

2. Attach the Hi-Hat Pad

  1. Place the bottom hi-hat pad onto the stand's clutch rod.
  2. Attach the hi-hat clutch to the top hi-hat pad. Ensure the clutch is securely fastened to the pad.
  3. Slide the top hi-hat pad (with clutch) onto the stand's rod, above the bottom pad. Adjust the height and angle for comfortable playing.
  4. Tighten the wing nut on the upper tube to secure the hi-hat pads at the desired height.
Close-up of Donner HHCB-12 Hi-Hat Pad on Stand

画像: 詳細な view of the Donner HHCB-12 electronic hi-hat pad, showing its black surface and the chrome stand components. The hi-hat clutch mechanism is visible, securing the pad to the stand rod.

3. Connect to Electronic Drum Module

  1. Locate the hi-hat input on your electronic drum module. This is typically labeled "HH" or "Hi-Hat".
  2. Connect one end of the provided connection cable to the output jack on the hi-hat pad.
  3. Connect the other end of the cable to the hi-hat input on your drum module.
  4. Power on your electronic drum module and select the appropriate hi-hat settings according to your module's manual.

操作手順

The Donner HHCB-12 Hi-Hat Pad is designed to replicate the feel and response of an acoustic hi-hat. Its operation is straightforward once connected to your electronic drum module.

  • オープンハイハット: Strike the pad when the foot pedal is not pressed down.
  • クローズドハイハット: Strike the pad while pressing the foot pedal down completely.
  • Foot Splash/Chick: Press the foot pedal down quickly without striking the pad to produce a "chick" sound, or release it quickly for a "splash" sound, depending on your module's settings.
  • ハーフオープンハイハット: Partially press the foot pedal down and strike the pad. The sensitivity and sound variation for half-open states can usually be adjusted in your drum module's settings.

For detailed sound adjustments and sensitivity calibration, refer to the user manual of your specific electronic drum module.

メンテナンスとケア

  • クリーニング： Wipe the hi-hat pad and stand with a soft, dry cloth. For stubborn dirt, a slightly damp 布で拭いた後、乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
  • ストレージ： When not in use for extended periods, store the hi-hat pad and stand in a clean, dry environment, away from direct sunlight and extreme temperatures.
  • 検査: Periodically check all screws, nuts, and clamps for tightness. Re-tighten as necessary to ensure stability and prevent wear.
  • ケーブルのお手入れ: Avoid bending or kinking the connection cable excessively. Store it neatly to prevent damage.

トラブルシューティング

問題考えられる原因解決
No sound from hi-hat pad.
  • ケーブルが正しく接続されていません。
  • Incorrect input on drum module.
  • Module settings incorrect.
  • Damaged cable or pad.
  • Ensure the connection cable is securely plugged into both the pad and the module.
  • Verify the cable is connected to the designated hi-hat input on your module.
  • Check your drum module's settings to ensure the hi-hat input is enabled and assigned correctly.
  • Try a different cable. If the issue persists, contact customer support.
Hi-hat sound is always open or always closed.
  • Hi-hat clutch not adjusted correctly.
  • Module settings for hi-hat control are incorrect.
  • Adjust the hi-hat clutch to allow proper movement and sensor activation.
  • Calibrate the hi-hat pedal in your drum module's settings. Refer to your module's manual.
Pad feels unstable or wobbly.
  • Stand not fully extended or tightened.
  • コンポーネントが緩んでいる。
  • Ensure the tripod base is fully spread and all height adjustment wing nuts are securely tightened.
  • すべてのclをチェックamps and screws on the stand and hi-hat clutch for tightness.

仕様

モデル：HHCB-12
タイプ：Electronic Hi-Hat Pad with Stand
パッドサイズ：12インチ
互換性:Compatible with most electronic drum modules (check module specifications for input requirements)
付属品:Hi-Hat Stand, Hi-Hat Clutch, Connection Cable

保証とサポート

Donner products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Donner webサイト。

ドナーオフィシャル Webサイト： www.donnerdeal.com

When contacting support, please have your product model (HHCB-12) and purchase date available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.