Sweetcrispy Ergonomic Mesh Office Chair

重要な安全情報

組み立ておよびご使用の前に、すべての説明書をよくお読みください。このマニュアルは、今後の参考のために保管してください。

• 椅子の上に立たないでください。
• 椅子を踏み台として使用しないでください。
• Ensure all bolts and screws are tightened securely before use. Re-tighten periodically.
• Do not use if any parts are missing, damaged, or worn. Contact customer support for replacement parts.
• 最大重量容量: 250 ポンド (113 kg)。
• 組み立ておよび調整中は、可動部分に子供を近づけないでください。

パッケージ内容

組み立てを始める前に、すべてのコンポーネントが揃っていることを確認してください。

• A: Backrest (x1)
• B: Seat (x1)
• C: Armrests (Left x1, Right x1)
• D: Mechanism (x1)
• E: Gas Lift (x1)
• F: Base (x1)
• G: Legs (x5)
• H: Casters (x5)
• I: Bolts (x4)
• J: Bolts (x6)
• K: Bolts (x10)
• L: Bolts (x4)
• M: Wrench (x1)

組み立て手順

視覚的なガイドについては、以下の組み立てビデオを参照してください。

1. 椅子のベースを組み立てる:
   Turn the Base (F) upside down. Insert the 5 Legs (G) into the Base one by one. Use the Wrench (M) to secure each leg with 2 Bolts (K), for a total of 10 Bolts (K).
   

   Image: Illustration of attaching the legs to the chair base.

2. キャスターを取り付けます。
   Press the 5 Casters (H) into the holes at the end of each Leg (G). Ensure they are firmly seated.
   

   Image: Close-up of a caster being inserted into a leg.
3. ガスリフトを挿入します。
   Insert the Gas Lift (E) into the center hole of the assembled Base (F).
   

   Image: The gas lift being placed into the central opening of the chair base.

4. アームレストを背もたれに取り付けます。
   Using the Wrench (M), install the Armrests (C) (1L and 1R, marked accordingly) to both sides of the Backrest (A) with 4 Bolts (I). 注記： Tighten these bolts only 50% at this stage.
   

   Image: A person attaching an armrest to the mesh backrest.

5. アームレストをシートに取り付ける:
   Turn the Seat (B) upside down. Using the Wrench (M), attach the Armrests (C) (already connected to the backrest) to the Seat (B) with 6 Bolts (J). Ensure the "FRONT" marking on the seat is facing the correct direction. Tighten these bolts 100%.
6. Attach the Mechanism:
   Make sure the "FRONT" direction of the Mechanism (D) and the Seat (B) are aligned. Using the Wrench (M), attach the Mechanism (D) to the Seat (B) with 4 Bolts (L). Tighten these bolts 100%.
   

   Image: The chair mechanism being screwed into the bottom of the seat.
7. 最終締め付けと組み立て：
   Using the Wrench (M), 100% tighten the previously installed 4 Bolts (I) on the Armrests (C) x1L x1R. Align the hole on the Mechanism (D) with the Gas Lift (E), and press the chair down until it is fully secured.

操作手順

Your Sweetcrispy office chair offers several adjustable features for optimal comfort.

• シート高さ調整: Locate the pneumatic adjustment lever under the seat. Pull the lever up to raise the seat. Sit on the chair and pull the lever up to lower the seat. The seat height can be adjusted from 18.5 to 22.2 inches.
  

  Image: Diagram illustrating the seat height adjustment lever.

• ロッキングモード: The chair features a 90-120 degree rocking mode. Use the lever under the seat to engage or disengage the rocking function. Adjust the tension control knob for desired rocking resistance.
  

  Image: Visual representation of the chair's rocking function and tension adjustment.

• Ergonomic Lumbar Support: The backrest is designed with prominent lumbar support to fit the natural curvature of your spine, promoting a relaxed posture.
  

  Image: Close-up of the chair's backrest highlighting the lumbar support area.
• Space-Saving Armrests: The armrests are designed to allow the chair to be pushed closer to a desk, saving space when not in use.
  

  Image: The chair positioned under a desk, demonstrating its space-saving armrest design.

• スムーズな動き： The multi-direction casters allow for effortless movement across various floor types, including tile, wood, and carpet.

メンテナンス

To ensure the longevity and appearance of your Sweetcrispy office chair, follow these simple maintenance guidelines:

• クリーニング： 広告できれいに拭き取るamp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the mesh and fabric.
• 定期点検: すべてのボルトとネジがしっかりと締まっているか定期的に点検してください。必要に応じて締め直してください。
• キャスターケア: スムーズに回転するために、キャスターに髪の毛やゴミが付着しないようにしてください。

トラブルシューティング

椅子に問題が発生した場合は、次の一般的な解決策を参照してください。

• 椅子のきしみ音: すべてのボルトとネジがしっかりと締まっているか確認してください。必要に応じて、可動部にシリコン潤滑剤を少量塗布してください。
• 高さ調整の難しさ: Ensure the gas lift lever is fully engaged or disengaged. If the issue persists, the gas lift may need replacement.
• 椅子がスムーズに転がらない: Inspect casters for trapped debris (hair, lint) and clean them thoroughly. Ensure casters are fully inserted into the base.
• 椅子が不安定に感じる: Verify that all legs are securely attached to the base and all bolts are tightened. Ensure the chair is on a flat, even surface.

If these steps do not resolve the issue, please contact Sweetcrispy customer support.

仕様

Image: Two Sweetcrispy Ergonomic Mesh Office Chairs in a modern office environment.

Image: Detailed product dimensions and 250 lbs weight capacity for the Sweetcrispy office chair.

保証とサポート

For warranty information or technical support, please refer to the product packaging or contact Sweetcrispy customer service directly. Keep your purchase receipt for any warranty claims.