製品終了view
The BISSELL CrossWave Edge Cordless Wet Dry Vacuum (Model 4329F) is designed to vacuum and wash multiple sealed hard floor surfaces and refresh area rugs simultaneously. This cordless unit offers convenience and efficient cleaning with specialized features for edge-to-edge cleaning and easy maintenance.
- Vacuum and Wash in One Step: Combines vacuuming and mopping to clean wet and dry messes on various hard surfaces and area rugs.
- 端から端までのクリーニング: Features ZeroGap Technology on the brush roll to clean close to walls and baseboards.
- コードレス操作: Provides freedom of movement without being tethered to an outlet.
- マルチサーフェス機能: Transitions smoothly between hard floors (tile, sealed wood, laminate) and area rugs.
- メンテナンスが簡単: Equipped with Tangle-Free Technology to minimize hair wrap on the brush roll and a Self-Cleaning mode for quick cleanup.
含まれるもの
Your BISSELL CrossWave Edge Cordless Wet Dry Vacuum package includes the following components:
- CrossWave Edge Cordless Wet Dry Vacuum Unit
- 充電ドック
- FreshStart Antimicrobial Filter
- Edge Cleaning Brush Roll
- Hard Floor Sanitize Formula (Trial Size)
- Storage & Rinse Tray
セットアップ手順
組み立て
- ハンドルを取り付ける: ハンドルを掃除機本体にカチッと音がしてしっかりと固定されるまで挿入します。
- 浄水タンクの設置: Fill the clean water tank with water and the recommended BISSELL cleaning formula. Align the tank with the grooves on the back of the machine and push it firmly until it seats.
- 汚水タンクの設置: Ensure the dirty water tank is empty and properly seated in the front of the machine.
- Check Brush Roll and Filter: Verify that the brush roll is correctly installed in the foot of the machine and the FreshStart filter is in place.
初期充電
Before first use, fully charge the vacuum. Place the unit on the charging dock. The battery indicator lights will illuminate to show charging status. A full charge typically takes several hours.
操作手順
掃除の準備
- きれいな水タンクを満たす: Remove the clean water tank from the back of the machine. Fill it with warm tap water to the 'Water' fill line and add the appropriate BISSELL cleaning formula to the 'Formula' fill line. Do not use hot or boiling water.
- 電源オン: ハンドルにある電源ボタンを押して、マシンの電源をオンにします。
硬い床の掃除
For hard floors, hold the spray trigger to dispense cleaning solution as you move the machine forward and backward. Release the trigger for dry passes to pick up excess solution and dry the floor.
クリーニングエリアラグ
For area rugs, ensure the machine is in the appropriate mode (if applicable, otherwise proceed with standard operation). Move the machine slowly over the rug, holding the spray trigger for a light application of solution to refresh the fibers. Release the trigger for dry passes to extract moisture.
エッジクリーニング
To clean along edges and baseboards, position the machine with the brush roll's edge cleaning side facing the wall. The ZeroGap Technology ensures thorough cleaning in these areas.
Using BISSELL Cleaning Solutions
For optimal cleaning results and to ensure the longevity of your machine, always use BISSELL brand cleaning formulas. These formulas are specifically designed for use with BISSELL CrossWave machines.
メンテナンスとケア
汚水タンクの空にし、清掃する
After each use, remove the dirty water tank, empty its contents, and rinse it thoroughly with water. Allow it to air dry before reinserting.
ブラシロールの清掃
The Tangle-Free Technology brush roll helps minimize hair wrap. To clean, remove the brush roll cover and the brush roll. Rinse it under running water to remove any debris. Ensure it is completely dry before reassembling.
Using Self-Cleaning Mode
Place the machine on its storage and rinse tray. Ensure the dirty water tank is empty and the clean water tank has at least 8 oz of water. Press the self-clean button. The machine will run a cycle to flush out debris from the brush roll and internal components.
Cleaning/Replacing FreshStart Filter
The FreshStart Antimicrobial Filter should be rinsed after each use and replaced every 3-6 months, or as needed, to maintain optimal performance and prevent odors. Allow the filter to air dry completely before reinserting.
トラブルシューティングガイド
If you encounter issues with your BISSELL CrossWave Edge Cordless Wet Dry Vacuum, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 機械の電源が入らない | バッテリーが充電されていません | Ensure the machine is fully charged on the charging dock. |
| Poor suction or leaving streaks | Dirty water tank is full or improperly seated; Clogged brush roll or filter | Empty and clean the dirty water tank. Check and clean the brush roll and FreshStart filter. |
| 溶液の分配なし | Clean water tank is empty or improperly seated; Spray nozzle is clogged | Refill the clean water tank and ensure it is securely in place. Check spray nozzle for blockages. |
| バッテリー駆動時間が短い | Battery not fully charged; Battery degradation over time | Ensure a full charge before use. For persistent issues, contact customer support. |
For issues not covered here, or if problems persist, please contact BISSELL Customer Support.
製品仕様
- モデル番号: 4329F
- 製品寸法: 10.8 x 10.5 x 43.5インチ
- 商品の重量: 10ポンド
- 電源: 電池駆動
- 巻tage: 25.9ボルト
- フィルタータイプ: Cartridge (FreshStart Antimicrobial)
- 表面の推奨事項: All floors (sealed hard floors and area rugs)
- 浄水タンク容量: 1リットル
- 色： 黒
- 屋内/屋外での使用: 屋内
保証とサポート
Your BISSELL CrossWave Edge Cordless Wet Dry Vacuum (Model 4329F) comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage.
For technical assistance, replacement parts, or further inquiries, please visit the official BISSELL website or contact their customer support line. Contact information can typically be found on the product packaging or the BISSELL webサイト。