SUNSMAI B75-2-Pro Steam Mop Cleaner User Manual

重要な安全上の注意事項

Please read all instructions carefully before using the SUNSMAI B75-2-Pro Steam Mop Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the appliance is unplugged from the power outlet before cleaning or performing maintenance.
• 機器を水やその他の液体に浸さないでください。
• このマニュアルに記載されているとおりに使用してください。製造元が推奨するアタッチメントのみを使用してください。
• Do not use on unsealed wood floors. Test in an inconspicuous area first if unsure of floor material.
• 髪の毛、ゆったりとした衣服、指、および体のすべての部分を開口部や可動部分から遠ざけてください。
• Do not use without water in the clean water tank.
• Do not add any detergents, chemicals, or essential oils to the water tank, as this may damage the appliance or create hazardous fumes.
• この機器は家庭用にのみご使用いただけます。
• 子供たちがアプライアンスで遊んでいないことを確認するために子供たちを監督します。
• 電源コードが損傷している場合は、危険を回避するために、製造元、そのサービス代理店、または同様の資格を持つ人が交換する必要があります。

製品終了view

The SUNSMAI B75-2-Pro Steam Mop Cleaner is a versatile 4-in-1 cleaning device designed for sealed hard floors. It combines sweeping, mopping, steam cleaning, and self-cleaning functions.

主な特徴:

• 4-in-1 機能: Sweeps, mops, steam cleans, and self-cleans.
• Deep Steam Cleaning: Heats up to 212°F (100°C) for chemical-free cleaning.
• Self-Cleaning Roller Brush: Automated cleaning cycle for the brush.
• NA-IX Anti-Scale Technology: Replaceable soft water filter cartridge to prevent limescale buildup.
• Dry-Wet Separation Dustbin: Detachable bin for easy disposal of debris.
• Versatile Floor Compatibility: Suitable for sealed hardwood, laminate, tile, stone, marble, and vinyl floors.
• ユーザー中心設計: Lightweight (7.28 lbs), 180° lie-flat capability, power-assisted drive, 6-meter power cord, and LED mop head illumination.

含まれるもの:

本体

ハンドル

Extension Aluminum Tube

充電ベース

浄水タンク

Additional Water Softening Box

セットアップガイド

Follow these steps to assemble your SUNSMAI B75-2-Pro Steam Mop Cleaner.

1. ハンドルの組み立て

Connect the handle components as shown in the video. Ensure the electrical connectors are properly aligned and secured before fastening with the provided screws.

2. Filter and Water Tank Installation

The anti-scale filter is pre-installed. An additional replacement filter is included. Slide the clean water tank onto the main body. No tools are required for this step.

3. Mop Roller Installation

Lock the mop roller into its designated slot on the mop head. Ensure it is securely in place.

操作手順

水タンクに水を入れる

1. アプライアンスのプラグが抜かれていることを確認します。
2. 本体から浄水タンクを取り外します。
3. Fill the tank with clean tap water. Do not exceed the MAX fill line.
4. Reattach the clean water tank securely to the main body.

Note: Using distilled or RO water is recommended to further reduce limescale buildup, though the included filter is designed to manage tap water. Do not add any cleaning solutions or chemicals to the water tank.

Powering On and Steam Generation

1. 電源コードを適切な電源コンセントに差し込みます。
2. Press the power button on the handle. The mop will begin to heat up.
3. Wait approximately 3 seconds for steam to generate. The LED lights on the mop head will illuminate.

クリーニングモード

The SUNSMAI B75-2-Pro offers two cleaning modes:

• Steam Mop Mode: For deep cleaning and dissolving stubborn stains. The mop head releases steam while the roller brush cleans.
• Dry-Sweep Mode: For quick pickup of dry debris. The roller brush operates without steam.

Switch between modes using the controls on the handle. The LED lights on the mop head assist in illuminating dark areas during cleaning.

Image: The steam mop effectively cleaning various sealed hard floor types, including hardwood, marble, tile, stone, laminate, and vinyl.

Image: The steam mop's user-friendly design, featuring a lightweight build, low-noise operation, and an LED spotlight for enhanced visibility under furniture.

メンテナンス

セルフクリーニングサイクル

After each use, place the mop on its charging base. Press and hold the power button for 2-3 seconds to activate the self-cleaning cycle. The mop will automatically rinse the roller brush with water, steam-sanitize it, and squeegee it dry in approximately 105 seconds.

Image: The steam mop's self-cleaning function, showing the roller brush being cleaned with high-temperature steam and fresh water.

汚水タンクの空にし、掃除する

The dirty water tank should be emptied and cleaned after each use to prevent odors and maintain hygiene. The tank can be easily removed for direct cleaning.

Image: Instructions for quick emptying of the dry-wet separation dustbin.

Image: Detailed steps for post-self-cleaning maintenance, including rinsing and air drying components to prevent odors and extend lifespan.

Replacing the Soft Water Filter Cartridge

The soft water filter cartridge should be replaced every 6 months under normal use. In areas with very hard water (>180 mg/L), replace every 3 months. Refer to the product overview section for the location of the filter.

トラブルシューティング

Note: Due to differences in production batches, the water tank cleaning brush may be missing. If not included, contact customer service for a free replacement. This does not affect normal use.

仕様

保証とサポート

For warranty information or customer support, please refer to the contact details provided in your product packaging or visit the official SUNSMAI webサイト。 保証請求に備えて購入時のレシートを保管しておいてください。

保護プランは別途ご購入いただけます。

• 2年間の保護プラン
• 3年間の保護プラン
• 完全保護: 1つのプランで、対象となる過去および将来のすべての購入をカバーします