JONR X9 PRO Robot Vacuum Cleaner with Mop Function Instruction Manual

1. はじめに

This manual provides essential information for the safe and efficient operation of your JONR X9 PRO Robot Vacuum Cleaner with Mop Function. Please read this manual thoroughly before using the product and retain it for future reference.

The JONR X9 PRO is designed to provide comprehensive floor cleaning, combining vacuuming and mopping capabilities. It features continuous fresh water self-cleaning for the mop roller, 20,000 Pa suction power, 40-75°C hot water mop cleaning, and AI obstacle avoidance for intelligent navigation.

2. 安全情報

火災、感電、または怪我のリスクを軽減するために、電気製品を使用するときは常に基本的な安全上の注意事項に従ってください。

• アプライアンスを操作する前に、すべての指示をお読みください。
• お子様にロボットで遊ばせないでください。ロボットの動作中は、お子様やペットから目を離さないでください。
• Use only the charging adapter and docking station provided by the manufacturer.
• パワーボリュームを確認してくださいtageはvolに一致するtage marked on the charging adapter.
• 火気や可燃性物質のある場所でロボットを操作しないでください。
• 髪の毛、ゆったりとした衣服、指、および体のすべての部分を開口部や可動部分から遠ざけてください。
• Do not immerse the robot or its charging dock in water or other liquids.
• ロボットを使用して、大きな物体、鋭利な物体、または液体を拾わないでください。
• Before cleaning or performing maintenance, switch off the robot and unplug the docking station.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• JONR X9 PRO Robot Vacuum Cleaner
• ドッキングステーション
• 充電アダプター
• 取扱説明書（このマニュアル）
• Mop Pad (pre-installed or spare)
• Water Tank (integrated or removable)
• ダストバッグ（プリインストールまたはスペア）

4.製品オーバーview

The JONR X9 PRO integrates advanced cleaning technologies into a compact design. Key components include the robot unit and the multifunctional docking station.

4.1 Robot Unit

The robot features a main roller brush, side brushes, various sensors for navigation and obstacle detection, and a water tank for mopping. It is equipped with a powerful suction motor and a continuous fresh water self-cleaning mop roller.

Image: JONR X9 Pro Robot Vacuum Cleaner and its multifunctional docking station.

4.2 多機能ドッキングステーション

The docking station serves as the robot's home base for charging and performs automated maintenance tasks. These tasks include hot water roller self-washing, dirty water tank agitation, automatic dust bag emptying, water tank refilling, and hot air roller drying.

Image: The JONR X9 Pro All-In-One 2.0 docking station, illustrating its various automated functions.

5. セットアップ

5.1 開梱

1. パッケージからすべてのコンポーネントを慎重に取り出します。
2. Remove all protective films and stickers from the robot and the docking station.

5.2 ドッキングステーションの配置

1. ドッキング ステーションを壁に沿った硬くて平らな面に置きます。
2. ドックの両側に少なくとも 0.5 メートル (1.6 フィート)、ドックの前面に 1.5 メートル (4.9 フィート) の空きスペースがあることを確認してください。
3. Avoid placing the dock near stairs, heat sources, or in direct sunlight.
4. 充電アダプターをドッキング ステーションに差し込み、電源コンセントに差し込みます。

5.3 初期充電

1. Place the robot onto the docking station. Ensure the charging contacts on the robot align with those on the dock.
2. The robot will automatically begin charging. Allow it to fully charge before its first use (approximately 6 hours).

5.4 Water Tank and Dust Bag Preparation

1. Fill the fresh water tank on the docking station with clean tap water.
2. Ensure the dirty water tank is empty and properly installed.
3. Confirm that a dust bag is correctly installed in the docking station's auto-emptying compartment.

5.5 アプリの接続とマッピング

1. Download the JONR app from your smartphone's app store.
2. Follow the in-app instructions to add your JONR X9 PRO robot. This typically involves connecting to the robot's Wi-Fi network.
3. Once connected, the robot will perform an initial mapping run of your home. Clear any obstacles to ensure accurate mapping.
4. The app allows for advanced features such as 3D smart mapping, zone cleaning, and setting no-go zones.

6. 操作

The JONR X9 PRO offers various cleaning modes and smart features for efficient floor care.

6.1 クリーニングサイクルの開始

• ロボットボタン経由: ロボットの電源ボタンを 1 回押すと、自動掃除サイクルが開始されます。
• アプリ経由: Open the JONR app and select the desired cleaning mode (Auto, Zone, Spot) and start cleaning.
• 音声コントロール経由: Use compatible voice assistants like Amazon Alexa or Google Home. For example, say "Alexa, start cleaning with JONR."

Image: The JONR X9 Pro can be controlled using voice commands via smart home assistants.

6.2 クリーニングモードと機能

• 自動クリーニング: ロボットはマップされたエリア全体をインテリジェントに移動して清掃します。
• ゾーンクリーニング: Use the app to define specific areas for the robot to clean.
• スポットクリーニング： Direct the robot to clean a concentrated area for spills or localized dirt.
• AI障害物回避: The robot uses advanced AI and 3D structured light to detect and avoid obstacles, including pet waste and small objects.

Image: The JONR X9 Pro utilizing next-generation AI to distinguish between solids and liquids for effective cleaning.

• カーペット検出: The robot automatically detects carpets and adjusts its cleaning strategy, such as lifting the mop roller to prevent wetting.
• エッジクリーニング： Dual FlexArms extend the mop roller and side brush to clean close to walls and into corners, ensuring 100% edge coverage.

Image: The JONR X9 Pro demonstrating its ability to clean edges and corners effectively.

6.3 Suction and Mopping

• The robot provides 20,000 Pa suction power for effective debris removal.
• The 26 cm wide roller mop applies 4000 Pa wiping pressure and performs 200 high-speed wiping actions per minute for thorough mopping.
• 16 fresh water spray nozzles continuously clean the mop roller during operation, preventing cross-contamination.

Image: Illustration of the JONR X9 Pro's 20,000 Pa suction power, capable of lifting various debris.

7. メンテナンス

Regular maintenance ensures optimal performance and extends the lifespan of your JONR X9 PRO.

7.1 ドッキングステーションのメンテナンス

• Hot Water Roller Self-Washing: The dock automatically cleans the mop roller with 75°C hot water after each cleaning cycle.
• Dirty Water Tank Agitation: The integrated five-blade agitator in the dirty water tank prevents sediment buildup and odors. Empty and rinse the dirty water tank regularly.
• Automatic Dust Bag Emptying: The robot automatically empties its dustbin into the docking station's 2.5L dust bag, providing up to 60 days of hands-free maintenance. Replace the dust bag when full.
• Hot Air Roller Drying: After washing, the mop roller is dried with 45°C hot air to prevent mildew and odors.

Image: The docking station performing 75°C hot water self-washing of the mop roller.

7.2 Robot Unit Maintenance

• メインローラーブラシ: Periodically remove the main roller brush and clean any tangled hair or debris. The Triple Tangle-Free System with integrated comb teeth helps minimize tangles.
• サイドブラシ: サイドブラシの摩耗や損傷がないか確認してください。絡まった髪の毛は取り除いてください。必要に応じて交換してください。
• センサー: Wipe all sensors (cliff sensors, wall sensors, charging contacts) with a clean, dry cloth to ensure proper function.
• フィルター： Clean the robot's filter regularly. Tap out dust or rinse if washable (refer to specific instructions for your filter type). Ensure it is completely dry before re-installing.

Image: Close-up of the JONR X9 Pro's triple tangle-free brush system, designed to prevent hair wrapping.

8。 トラブルシューティング

If you encounter issues with your JONR X9 PRO, refer to the following common problems and solutions:

For further assistance, please contact JONR customer support.

9. 仕様

10. 保証とサポート

The JONR X9 PRO Robot Vacuum Cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact JONR customer service through the contact information provided on the official JONR webサイトまたは製品ドキュメントに記載されています。