FOHERE 6.5L Ultrasonic Cleaner (Model JX-031S) Instruction Manual

1. はじめに

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your FOHERE 6.5L Ultrasonic Cleaner, Model JX-031S. Please read it thoroughly before using the appliance and retain it for future reference.

The FOHERE 6.5L Ultrasonic Cleaner is designed for professional and household use, offering deep and efficient cleaning for various items such as tools, jewelry, glasses, and small engine parts. It utilizes high-frequency sound waves to create cavitation bubbles in the cleaning solution, which gently yet powerfully dislodge contaminants from surfaces.

Figure 1: FOHERE 6.5L Ultrasonic Cleaner, Model JX-031S.

2. 安全に関する注意事項

警告: これらの安全指示に従わなかった場合、感電、火災、または重傷を負う可能性があります。

• 水位: Ensure the water level in the tank is always over 2/3 of its capacity during operation to prevent damage to the unit.
• No Liquid Operation: Never operate the unit without liquid in the tank.
• 熱い液体の注意: Be cautious when handling hot water and the lid to avoid the risk of scalding.
• 接地: Always ensure the appliance is correctly grounded to prevent electric shock.
• 可燃性の液体： Do not pour flammable liquids into the tank.
• 電源切断: ユニットを清掃または修理する前に、電源コードをコンセントから抜いてください。
• 監督： 操作中は機器から目を離さないでください。
• 子供たち： お子様の手の届かない場所に保管してください。

3.製品オーバーview

The FOHERE JX-031S Ultrasonic Cleaner features a robust design and intuitive controls for effective cleaning.

主な特徴:

• High-Power Quad Transducer System: Equipped with four industrial-grade 60W ultrasonic transducers (total 180W) for intense and uniform cavitation.
• Precision Heating System: A built-in 200W heater allows temperature adjustment up to 176°F (80°C) for enhanced cleaning.
• 大容量タンク： A 6.5L (1.7-gallon) tank made from durable 304 stainless steel.
• Smart Drainage: Integrated side faucet for easy dirty water drainage.
• デジタルコントロールパネル： Clear LED display for precise time (0-30 mins) and temperature (up to 176°F in 1°F steps) control.
• 付属品: Includes a detachable stainless steel basket.

Figure 2: Power and Transducer System Overview.

Figure 3: Digital Control Panel for precise operation.

4. セットアップ

1. 配置: Place the ultrasonic cleaner on a stable, level, and dry surface. Ensure it is near a grounded electrical outlet.
2. 電源接続: Connect the power cord to the appliance and then to a grounded electrical outlet. Ensure the main power switch (located at the back) is in the OFF position before plugging in.
3. 充填タンク： Open the lid and fill the stainless steel tank with water or an appropriate cleaning solution. Ensure the liquid level is above the MIN mark and below the MAX mark, covering the items to be cleaned, but never exceeding 2/3 of the tank's capacity.
4. バスケットを挿入: Place the stainless steel cleaning basket into the tank.
5. アイテムをロード: Carefully place the items to be cleaned into the basket. Ensure items are not directly touching the bottom of the tank to allow for optimal ultrasonic wave distribution.

Figure 4: Stainless steel tank and cleaning basket.

5. 操作手順

Follow these steps to operate your ultrasonic cleaner:

1. 電源オン: Flip the main power switch (located at the back of the unit) to the ON position. The digital display will illuminate.
2. 設定温度: Press the 'TEMP+' or 'TEMP-' buttons to adjust the desired cleaning solution temperature. The temperature can be set up to 176°F (80°C). Preheating is recommended for tasks requiring higher temperatures to optimize cavitation.
3. タイマーの設定： Press the 'TIME+' or 'TIME-' buttons to set the desired cleaning duration. The timer can be set from 0 to 30 minutes.
4. クリーニングを開始します: Press the 'ON/OFF' button under the 'ULTRASONIC' section to start the ultrasonic cleaning process. The ultrasonic indicator light will turn on.
5. 加熱機能: If heating is desired, press the 'ON/OFF' button under the 'HEATING' section. The heating indicator light will turn on.
6. 進捗状況を監視する: The digital display will show the set temperature and actual temperature, as well as the remaining cleaning time.
7. サイクルの終了: The unit will automatically stop the ultrasonic process once the timer counts down to zero. You can manually stop the process at any time by pressing the 'ON/OFF' buttons for ultrasonic and heating.
8. 排水： After cleaning, turn off the unit. Open the drain valve located on the side to empty the dirty cleaning solution. Close the valve once the tank is empty.

役立つヒント:

For optimal cleaning, especially for items with heavy grease or contaminants, consider preheating the solution to the recommended temperature before starting the ultrasonic cycle. The 40kHz frequency ensures deep cleaning without damaging sensitive surfaces.

6. メンテナンス

定期的なメンテナンスにより、超音波洗浄機の寿命が長くなり、最適なパフォーマンスが確保されます。

• Draining and Cleaning Tank: After each use, especially with dirty solutions, drain the tank completely using the side valve. Rinse the tank with clean water and wipe it dry with a soft cloth. Do not use abrasive cleaners or scrubbers.
• 外装清掃: ユニットの外装を広告で拭きますamp 布で拭いてください。コントロールパネルや電気部品に水が入らないようにしてください。
• バスケットのクリーニング: Clean the stainless steel basket as needed to remove any residue.
• ストレージ： Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry before storage.

Figure 5: Design features for durability and ease of use, including non-skid feet and drain.

7。 トラブルシューティング

If you encounter issues with your FOHERE Ultrasonic Cleaner, refer to the following common problems and solutions:

8. 仕様

Detailed specifications for the FOHERE 6.5L Ultrasonic Cleaner (Model JX-031S):

図 6: 製品の寸法とパッケージの内容。

9. 保証とサポート

The FOHERE 6.5L Ultrasonic Cleaner (Model JX-031S) comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact FOHERE customer service directly.

For further assistance, please visit the official FOHERE webサイトをご覧いただくか、購入時に提供された連絡先情報を通じてサポート チームにお問い合わせください。