1. はじめに
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Flyrivergo 6-inch Flat Lapidary Machine. Designed for grinding, shaping, smoothing, and polishing various materials such as stones, minerals, synthetic gems, enamels, and metals, this machine is suitable for creating cabochons and intricate faceted designs. Please read this manual thoroughly before initial use and retain it for future reference.
2. 安全に関する注意事項
Always prioritize safety when operating any machinery. Failure to follow these instructions may result in injury or damage to the equipment.
- マニュアルを読む: 使用する前に、すべての操作手順と安全上の警告を理解してください。
- 個人用保護具（PPE）： Always wear appropriate eye protection (safety glasses or goggles) and gloves. Consider a dust mask if working with materials that produce fine airborne particles.
- 作業エリア: Operate the machine in a well-ventilated area. Ensure the work surface is stable, level, and capable of handling water and potential splashes. Keep the area clean and free of clutter.
- 電気安全: Ensure the power supply matches the machine's requirements (110-120V AC/60Hz). Do not operate with wet hands or in excessively wet conditions. Never use damaged power cords.
- 水冷： Always use the water cooling system during operation to prevent overheating of the material and the grinding disc. Ensure proper water flow and drainage.
- 回転部品: Keep hands, hair, loose clothing, and jewelry away from the rotating grinding disc. Never attempt to stop the disc with your hand.
- 材料処理: Apply gentle, consistent pressure when grinding. Avoid excessive force, which can damage the material or the machine.
- 使用しないときはプラグを抜いてください: Disconnect the machine from the power source before performing any adjustments, maintenance, or when not in use.
- 子供とペット: Keep children and pets away from the machine during operation and storage.
3. パッケージ内容
下記のすべての品目がパッケージに含まれていることをご確認ください。不足または破損している品目がある場合は、カスタマーサポートまでご連絡ください。
- Flyrivergo 6-inch Flat Lapidary Machine Unit
- ウォーターポンプセット
- Grinding Discs (various grits: 180#, 320#, 600#, 1200#)
- Wooden Rod (for dop sticks)
- Water Pipe Set (including adjustable multi-angle nozzle)
- 研削盤
- 電源コード
- 六角レンチ
- レンチ
4.製品オーバーview
Familiarize yourself with the main components and controls of your lapidary machine.
- モーター出力: 1/4 HP (Approx. 186W) asynchronous induction motor for quiet operation and long lifespan.
- 速度範囲: Up to 2800 RPM, with variable speed control.
- 作業面: Brushed stainless steel for durability and precision.
- 定格巻tag周波数: 110-120V AC/60Hz.
- コントロールパネル： Features independent run/stop button, forward/reverse rotation switch, and speed control knob.
- Shaft Center Safety Design: Edge drainage port for fast water removal; hollow shaft design prevents friction with plastic parts during rotation.
- スプラッシュガード： Effectively blocks water and debris splatter.
- ゴム足パッド: Non-slip and anti-vibration design with a 22-lb (10 kg) weighted body ensures stable, wobble-free operation.
5. セットアップ
Follow these steps to set up your lapidary machine before first use.
5.1 研削ディスクの取り付け
- Remove the nut and washer from the central shaft.
- Place the desired grinding disc flat and steady onto the grinding table.
- Put the washer and nut back onto the shaft sequentially, then tighten securely using the provided wrench.
5.2 Water Cooling and Drainage Setup
- Connect the water pump to a suitable water reservoir (not included).
- Attach the water pipe set, including the adjustable multi-angle nozzle, to the water pump and position it to direct water onto the center of the grinding disc.
- Locate the drain hose extending from the left side of the unit. Fully extend this hose to ensure water can flow freely through it. The hose should reach a length approximately equal to that of your forearm.
- Ensure the drain hose is positioned to direct wastewater into a suitable container or drain.
注記： Once the drain hose is fully extended, water should flow through it freely, preventing the pan from filling up. When not in use, retract the hose back into the main unit to maintain a clean and organized workspace.
5.3電源接続
- Connect the power cord to the machine and then to a grounded 110-120V AC/60Hz electrical outlet.
5.4 セットアップビデオガイド
For a visual guide on setting up your machine, please watch the official setup video:
6. 操作
This section details how to operate your lapidary machine for grinding and polishing.
6.1 基本的な操作手順
- 電源オン: Flip the main power switch to the ON position. The power indicator light will illuminate.
- 始動モーター: を押す 走る コントロールパネルのボタン。
- 速度を調整: Turn the speed control knob to achieve the desired RPM. Start with a lower speed and gradually increase as needed.
- 回転方向を選択: 使用 FWD / REV switch to select the rotation direction (forward or reverse) as required for your task.
- Apply Water: Ensure the water pump is active and the adjustable nozzle is directing a steady stream of water onto the grinding disc.
- 研削/研磨: Gently place the material onto the rotating disc, applying light, consistent pressure. Move the material across the disc surface to ensure even grinding.
- モーター停止: を押す 停止 button to halt the disc rotation.
- 電源を切る： Flip the main power switch to the OFF position when finished.
6.2 Using Different Grits
The machine comes with multiple diamond grinding discs for progressive material removal and finishing.
- 180# Disc (Coarse): For aggressive material removal and initial shaping. Produces rough texture with clearly visible scratch patterns.
- 320# Disc (Medium-Coarse): For refining shape and removing coarser scratches. Results in a semi-rough, fine sandpaper-like finish.
- 600# Disc (Fine): For smoothing the surface and preparing for polishing. Leaves a smooth but slightly hazy finish, similar to frosted glass.
- 1200# Disc (Very Fine): For pre-polishing and achieving a near-mirror effect with no detectable graininess.
6.3 Faceting with Wooden Dop Sticks
The included wooden rod can be used to create dop sticks for precision facet cutting. Secure your gemstone to the dop stick and use it to hold and manipulate the stone against the grinding disc for controlled faceting.
7. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your lapidary machine.
- クリーニング： After each use, clean the grinding table and splash guard to remove accumulated slurry and debris. Use a soft cloth and water. Ensure the machine is unplugged before cleaning.
- 排水システム： Periodically check the drain hose for blockages and ensure it is clear for proper water flow.
- ディスクケア: Store grinding discs properly to prevent damage. Replace worn-out or damaged discs promptly to maintain grinding efficiency and safety.
- モーター： The asynchronous induction motor is designed for long life and requires minimal maintenance. Keep the motor housing clean and free of dust.
- ストレージ： 使用していないときは、機械を乾燥した清潔な環境に保管してください。
8。 トラブルシューティング
一般的な問題とその解決策については、このセクションを参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| マシンの電源が入りません。 | No power supply; main switch off; power cord damaged. | Check power outlet; ensure main switch is ON; inspect power cord for damage and replace if necessary. |
| Disc does not rotate. | Motor not started (RUN button not pressed); speed knob set to zero; internal fault. | Press the RUN button; adjust speed knob to a higher setting; if issue persists, contact support. |
| Poor grinding/polishing performance. | Worn-out grinding disc; incorrect grit for task; insufficient water flow. | Replace grinding disc; use appropriate grit for the material and stage; ensure adequate water supply. |
| 過度の振動またはノイズ。 | Disc not properly seated or tightened; uneven work surface; damaged motor. | Ensure disc is flat and securely tightened; place machine on a stable, level surface; contact support if motor noise is unusual. |
| Water accumulation in the pan. | Drain hose not fully extended or blocked. | Fully extend the drain hose; check for and clear any blockages in the hose. |
9. 仕様
Technical specifications for the Flyrivergo 6-inch Flat Lapidary Machine.
| 特徴 | 詳細 |
|---|---|
| ブランド | フライリバーゴ |
| モデル番号 | WYS-15-1 |
| モーター出力 | 1/4 HP (Approx. 180W) |
| スピード | Up to 2800 RPM (Variable Speed) |
| 巻tage | 110-120ボルト |
| 頻度 | 60Hz |
| 作業面材質 | ブラシ仕上げステンレススチール |
| 含まれるコンポーネント | Hex Wrench, Polishing Disc (various grits), Water Pump Set, Water Pipe Set, Wooden Rod, Grinding Table, Power Cord, Wrench |
| 具体的な用途 | Gemstone, Jewelry, Rock Grinding and Polishing |
| 機械重量 | 約22ポンド（10kg） |
10. 保証とサポート
Your Flyrivergo 6-inch Flat Lapidary Machine (Model WYS-15-1) comes with a 1年間のメーカー保証 購入日から、通常使用における材料および製造上の欠陥をカバーします。
For warranty claims, technical assistance, or any questions regarding your product, please contact Flyrivergo customer support through the retailer where you purchased the item or visit the official Flyrivergo store page for contact information.
オンラインサポート： Visit the Flyrivergo Store on Amazon