導入
This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your Flyrivergo 4000mAh Electric Strapping Machine. This comprehensive tool integrates tensioning, welding, and cutting functions to streamline your packaging tasks. Please read this manual thoroughly before using the machine to ensure proper handling and to prevent injury or damage.
安全に関する注意事項
Always adhere to these safety guidelines to prevent accidents and ensure safe operation:
- 機械を操作する前に、このマニュアルのすべての指示を読んで理解してください。
- 操作中は、安全メガネや手袋などの適切な個人用保護具 (PPE) を着用してください。
- 操作中は可動部分に手やゆったりとした衣服を近づけないでください。
- 作業エリアが清潔で、明るく、障害物がないことを確認してください。
- 濡れた場所や高温の場所では機械を操作しないでください。amp 条件。
- Use only the specified PET/PP strapping material with the correct dimensions.
- Handle batteries with care. Do not short-circuit, disassemble, or expose batteries to extreme temperatures.
- 子供や関係者以外の人を操作エリアから遠ざけてください。
- メンテナンスや清掃を行う前に、バッテリーを外してください。
製品構成
Your Flyrivergo Electric Strapping Machine package includes the following main components:
- Electric Strapping Machine Unit
- 4000mAh Rechargeable Batteries (x2)
- High-Power Battery Charger
- Polyester (PET) Heavy Duty Strapping Roll (5/8" width, 1049' length)
- Self-Dispensing Outer Box for Strapping Roll
Image: The electric strapping machine shown with its two 4000mAh batteries and the high-power charger. The image highlights the battery protection cover and the fast charging capability.
Image: A roll of green PET strapping material, detailing its specifications: 5/8 inch width, 1049 feet (320 meters) length, and 1100 lbs tensile strength.
Image: A hand demonstrating how to pull PET strapping from its self-dispensing box, designed to prevent tangling.
仕様
電動結束機
| 特徴 | 仕様 |
|---|---|
| Max Tension | 3800N (10 gear tension strength) |
| バッテリー容量 | 4000mAh（×2） |
| 充電時間 | フル充電には約90分かかります |
| Strappings per Charge | 350以上 |
| 連続労働時間 | 最大5時間 |
| 表示タイプ | Real LCD Screen |
| 機能 | Tensioning, Welding, Cutting |
PET Strapping Roll
| 特徴 | 仕様 |
|---|---|
| 材料 | Polyester (PET) |
| 幅 | 5/8インチ |
| 長さ | 1049フィート（320メートル） |
| 抗張力 | 1100ポンド |
| プロパティ | High strength, toughness, round edges, waterproof, moisture-proof, corrosion-proof |
Image: Visual guide for recommended tension strength settings (1-10 gears) based on the material being strapped, ranging from Carton to Steel.
Image: A comparison chart illustrating the superior features of the new Flyrivergo model, including 3800N max tension, 4000mAh battery, real LCD screen, and 5 hours of continuous operation.
設定
1. バッテリーの取り付けと充電
- Ensure the machine is powered off before installing or removing the battery.
- マシン上のバッテリー収納部を見つけます。
- Insert a charged 4000mAh battery into the compartment, ensuring it clicks securely into place.
- To charge a battery, connect it to the provided high-power charger. The charger will indicate when charging is complete (approximately 90 minutes for a full charge).
- Always use the battery protection cover to shield batteries from dust and splashes.
Image: Illustration demonstrating the correct method for inserting the 4000mAh battery into the strapping machine, highlighting the battery protection cover and charger.
2. Loading the Strapping Roll
- Unpack the PET strapping roll from its self-dispensing box. The box is designed to prevent the strapping from scattering.
- Locate the strapping inlet on the machine.
- Feed the end of the PET strapping into the inlet, ensuring it is properly aligned.
- Pull the strapping through until it extends beyond the cutting mechanism, ready for use.
Image: A hand demonstrating how to pull PET strapping from its self-dispensing box, designed to prevent tangling.
Image: The multifunctional outer box for the PET strapping, featuring handles for portability and initial packaging that keeps the strapping organized.
操作手順
1.電源のオン/オフ
Press and hold the power button (usually located near the handle) to turn the machine on or off. The LCD screen will illuminate upon powering on.
2. Adjusting Tension and Welding Time (LCD Screen)
The machine features a real LCD screen that allows for precise adjustment of tension force and welding time. The screen also displays the strapping process status through visual symbols.
- Use the control buttons adjacent to the LCD screen to navigate through settings.
- Adjust the tension level (Lv) according to the material being strapped. Refer to the 'Tension Guidelines for Materials' below.
- Set the welding time (Sec) as required for optimal strap fusion.
- The screen will display symbols indicating whether the strapping is in progress, complete, or if an error has occurred.
画像: 詳細な view of the machine's LCD screen, displaying current tension level (Lv) and welding time (Sec) settings, along with status indicators.
3. Strapping Process (3 Steps)
The electric strapping machine integrates tensioning, welding, and cutting into a simple three-step process:
- Insert Strapping: Pull up the handle of the machine and place the PP/PET strapping around the package, then feed both ends into the machine's strapping slot.
- 締める： Press the tightening button. The machine will begin to tension the strap around the package to the set tension level.
- 溶接と切断: Once the desired tension is reached, press the welding switch. The machine will automatically weld the strap ends together and cut off any excess strapping simultaneously.
4. Tension Guidelines for Materials
Refer to the following guidelines for selecting the appropriate tension strength (1-10 gears) based on the material of your package:
- カートン: 1-2 gears (0-760N)
- Wooden board: 3-4 gears (760-1520N)
- アルミニウム： 5-6 gears (1520-2280N)
- 石： 7-8 gears (2280-3040N)
- 鋼鉄： 8-10 gears (3040N-3800N)
Image: Visual guide for recommended tension strength settings (1-10 gears) based on the material being strapped, ranging from Carton to Steel.
メンテナンス
1. 清掃
- Regularly clean the machine's exterior with a soft, dry cloth.
- Ensure the strapping path and welding area are free from dust, debris, and strapping residue to maintain optimal performance.
- 研磨剤や溶剤は使用しないでください。
2. バッテリーのお手入れ
- バッテリーを使用しないときは、涼しく乾燥した場所に保管してください。
- バッテリーの寿命を延ばすために、バッテリーを頻繁に完全に放電することは避けてください。
- Charge batteries only with the provided charger.
- 長期間保管する場合は、バッテリーを約 50% の容量まで充電してください。
トラブルシューティング
If you encounter issues with your strapping machine, refer to the following common problems and solutions:
- マシンの電源が入らない: バッテリーが正しく取り付けられており、完全に充電されているかどうかを確認します。
- Strapping not tensioning: Ensure the strapping is correctly inserted and the tension setting is appropriate for the material. Check for any obstructions in the strapping path.
- Poor weld quality: Verify that the welding time is set correctly. Ensure the welding surfaces are clean and free of debris.
- Strapping not cutting: Check for any obstructions in the cutting mechanism. Ensure the strapping is fully tensioned before attempting to cut.
ここに記載されていない問題については、カスタマー サポートにお問い合わせください。
保証とサポート
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact Flyrivergo customer service through the official channels. Keep your purchase receipt as proof of purchase for warranty claims.