導入
The SmallRig AP255Pro is a compact and portable carbon fiber travel tripod designed for photographers and videographers. It features a 5-section leg design and a fluid head, offering stability and versatility for various shooting scenarios.
Key features include a bowl base for quick leveling, a 180-degree reversible center column for low-angle and macro shots, and a fluid head with a 3kg (6.6lb) maximum load capacity, supporting 360-degree rotation, 90-degree overhead shooting, and 65-degree upward shooting.
The tripod legs are compatible with various heads and stabilizers via 3/8''-16 threaded holes, supporting an 8kg (17lb) maximum payload. The tripod head accommodates mirrorless cameras, camera cages, and phones using 1/4''-20 threaded holes and the included phone clamp.
箱の中身
開梱時にすべてのコンポーネントが揃っていることを確認します。
- Compact Travel Tripod x 1
- 携帯電話ホルダー x 1
- キャリングバッグ×1
セットアップ手順
1. 三脚の脚を伸ばす
Unlock the leg sections by twisting the leg locks. Extend each of the 5 leg sections to the desired length. Twist the locks in the opposite direction to secure them. Ensure all leg sections are fully locked before use.
2. Adjusting the Center Column
To adjust the height of the center column, loosen the center column lock, raise or lower the column, and then tighten the lock securely. For low-angle shots, the center column can be inverted. Loosen the center column lock, remove the column, flip it upside down, and reinsert it, then secure the lock.
3. Leveling the Tripod with the Bowl Base
The tripod features a bowl base for quick leveling. After setting up the legs, use the bowl base adjustment to fine-tune the head's level without needing to adjust each leg individually. This is particularly useful on uneven terrain.
4. デバイスの取り付け
The fluid head includes a quick release plate. Attach this plate to your camera or camera cage using the 1/4''-20 threaded screw. For smartphones, use the provided phone holder, which also attaches to the quick release plate. Once attached, slide the quick release plate with your device into the head and secure it with the quick release plate lock.
操作手順
1. フルイドヘッドの使用
The fluid head allows for smooth panning and tilting movements. Use the pan lock to control horizontal rotation (360 degrees) and the tilt lock to control vertical movement (90 degrees overhead, 65 degrees upward). Loosen the respective locks for movement and tighten them to secure the position.
2. Carbon Fiber Leg Design
The tripod legs are constructed from carbon fiber, providing a balance of portability and stability. The maximum leg diameter is 25.5mm (1 inch).
メンテナンス
- クリーニング： 三脚は使用後、毎回柔らかく乾いた布で拭いてください。頑固な汚れには、軽く湿らせた布を使用してください。amp 布と中性洗剤で拭き、完全に乾かしてください。刺激の強い化学薬品は使用しないでください。
- 潤滑: Periodically check leg locks and moving parts for smooth operation. Do not over-lubricate; use a small amount of silicone-based lubricant if necessary.
- ストレージ： 三脚はキャリーバッグに入れて、直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。
- 検査： Regularly inspect all screws, bolts, and connections to ensure they are tight. Do not overtighten.
トラブルシューティング
- 三脚が不安定です: Ensure all leg locks are fully tightened and the center column lock is secure. Check that the tripod is placed on a flat, stable surface.
- Leg sections are stiff: Clean the leg sections and locks to remove any dirt or debris. A small amount of silicone lubricant can be applied to the moving parts if needed.
- 流体ヘッドの動きがスムーズではありません: Ensure the pan and tilt locks are sufficiently loosened. Check for any obstructions or debris in the fluid head mechanism.
- カメラがしっかりと取り付けられていません: Verify that the quick release plate is correctly attached to your camera and fully seated in the fluid head, with the quick release plate lock engaged.
仕様
| 特徴 | 詳細 |
|---|---|
| 製品寸法 | 3.46 x 3.15 x 20.47 インチ (88.0 x 79.0 x 520.0mm) |
| アイテム重量 | 3.3 ポンド (1.5 キログラム) |
| 商品型番 | 13649 |
| ブランド | スモールリグ |
| 色 | 黒 |
| 材料 | Aluminum, Carbon Fiber, ABS |
| 最大高さ | 160センチメートル（63インチ） |
| 雲台タイプ | 雲台 |
| Tripod Leg Max Load Capacity | 8kg（17lb） |
| Tripod Head Max Load Capacity | 3kg（6.6lb） |
| 折り畳み長さ | 52cm（20.5インチ） |
| 脚部 | 5 |
| Max Leg Diameter | 25.5mm（1インチ） |
保証とサポート
保証情報とテクニカルサポートについては、SmallRigの公式ウェブサイトをご覧ください。 webご購入の際は、ウェブサイトをご覧いただくか、カスタマーサービスまで直接お問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。
You can typically find support contact details and warranty terms on the manufacturer's product page or in the documentation included with your purchase.