Aninerel 3.6kW Hybrid Solar Inverter (48V DC to 110V AC) Instruction Manual

1. はじめに

This manual provides essential information for the safe and efficient operation of your Aninerel 3.6kW Hybrid Solar Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference. This inverter is designed to convert 48V DC power to 110V AC pure sine wave power, suitable for various on-grid and off-grid applications.

画像1: 以上view of the Aninerel 3.6kW Hybrid Solar Inverter, showcasing its main features including battery compatibility, grid connection, power scaling, versatile design, flexible settings, and wireless communication.

2. 安全に関する注意事項

感電、火災、または怪我のリスクを軽減するために、常に次の安全上の注意事項を守ってください。

• 有資格者： 設置とメンテナンスは資格のある担当者のみが行う必要があります。
• 屋内使用: This product is designed for indoor use. It is forbidden to use it outdoors.
• 換気： Ensure adequate ventilation around the inverter. Maintain at least 8 inches of clear space on all sides for proper airflow.
• バッテリー接続: Always connect the battery to the inverter first before connecting solar panels or AC input.
• 接地: 電気的な危険を防ぐために、インバーターが適切に接地されていることを確認してください。
• 緊急シャットダウン: Familiarize yourself with the emergency shutdown procedures.
• 過負荷保護: インバータには過電圧に対する保護機能が組み込まれていますtage、undervoltage, reverse polarity, and short circuits.

Image 2: A warning label emphasizing that the inverter is an indoor product and should not be used outdoors.

3. 主な特徴

• 3600W Hybrid Solar Inverter: Converts DC 48V to pure sine wave AC 110V, delivering 3,600W continuous and 7,200W peak output. Supports up to 4,500W PV input with 80A MPPT solar charging, maximum DC voltage 300V. Features 40A max AC input, 50/60Hz output frequency, starting voltage above 125VDC, and 80A maximum PV charging current.
• Built-in 80A MPPT Solar Charging Controller: Maximizes solar energy harvesting, boosting charging efficiency by up to 30%. Compatible with high-voltage PV arrays (up to 300VDC).
• 並列サポート: Supports parallel connection of up to 6 units for increased power (up to 21.6KW). Offers 120V single-phase, 120V/240V split-phase, and 208V three-phase output configurations.
• Smart LCD Screen with Real-Time Monitoring: Responsive LCD screen and indicator LEDs for real-time monitoring of power input/output, battery status, and system alerts. Intuitive control buttons for system settings.
• Flexible Charging & Output Modes: Four charging modes (Solar Only, AC Priority, Solar Priority, Hybrid Charging) and three output modes (Mains Priority, PV Priority, Inverter Output).
• 48V Battery & No-Battery Operation: Compatible with AGM, GEL, Lead-acid, Li-ion, and LiFePO4 48V batteries. Supports no-battery mode for direct solar-to-load applications.
• Rugged IP65 Dustproof & Durable Design: Built to withstand harsh environments with IP65-rated enclosure for indoor or semi-outdoor use. Features smart cooling with a variable speed fan.
• 幅広い用途: RVに適しています、camping boats, home emergency situations, powering various appliances.

Image 3: Visual representation of the inverter's versatile design, showing single-phase, split-phase, and three-phase parallel connection options for up to six units.

4. セットアップとインストール

4.1 開梱と検査

Carefully unpack the inverter and all accessories. Inspect for any damage during transit. The package should include the inverter, instruction manual, installation toolkit, current sharing detection line, parallel cable, anti-reverse current CT, and WiFi module.

Image 4: Contents of the product package, including the inverter, manual, installation toolkit, various cables, and a WiFi module.

4.2 コンポーネントの識別

Familiarize yourself with the inverter's external components and connection points:

1. 表示灯
2. 液晶画面
3. タッチキー
4. 過負荷保護装置
5. 接地ネジ留め
6. AC出力ポート
7. WiFi port (optional)
8. AC入力ポート
9. RS485-2 通信ポート
10. RS485-1 通信ポート
11. USB通信ポート
12. 冷却ファン
13. ON/OFFロッカースイッチ
14. ドライコンタクトポート
15. 電流共有ポート (パラレル モジュールのみ)
16. パラレル通信ポート（パラレルモジュールのみ）
17. バッテリーポート
18. PVポート

Image 5: Detailed diagram identifying all external ports and features of the inverter.

4.3配線接続

Follow these steps for safe and correct wiring:

1. バッテリー接続: Connect the 48V battery to the designated battery ports (BAT+ and BAT-). Ensure correct polarity.
2. PV 入力: Connect your solar panel array to the PV ports (PV+ and PV-). Ensure the PV voltage is within the specified range (90-260Vdc MPPT range, max 300Vdc open circuit).
3. AC入力/出力: Connect AC input from the grid or generator to the AC IN ports. Connect your loads to the AC OUT ports.
4. 接地: Connect the grounding wire to the grounding screw hold.

Image 6: A comprehensive wiring diagram showing connections for PV input, utility/generator input, battery, and inverter output.

推奨されるワイヤーサイズ：

繋がり	推奨ワイヤ径	最大電流
AC入力	10mm²/7AWG	40A
バッテリー入力	25mm²/3AWG	120A (Charge) / 85A (Discharge)
AC出力	10mm²/7AWG	30A (Inverter) / 40A (Bypass)

4.4 Parallel Installation (Optional)

For increased power, up to 6 units can be connected in parallel. Refer to the detailed wiring diagrams for single-phase, split-phase, and three-phase configurations in the full manual. Ensure all units are properly synchronized.

Image 7: Detailed illustration of single-phase, split-phase, and three-phase parallel connection setups for multiple inverters.

5. 操作

5.2 LCDディスプレイと設定

The LCD screen provides real-time data and allows configuration of various parameters. Use the control buttons (SET, UP, DOWN, ENTER) to navigate menus and adjust settings.

• 充電優先順位: Control how the battery bank is charged from different power sources (Solar Priority, Solar and AC input, Solar Only).
• ロード優先度: Control how appliances are powered to prevent power interruptions (Solar Priority, AC Priority, DC Priority).

Image 8: The inverter's LCD screen showing options for Charging Priority and Load Priority settings.

5.3 Wi-Fiモニタリング

The inverter is equipped with a Wi-Fi module for real-time monitoring via a mobile application. 検索する "Smart Value" in your app store to download and install the application. This allows remote monitoring of the inverter's operating status.

Image 9: Illustration of the Wi-Fi module connection and the availability of the "Smart Value" mobile application for real-time monitoring.

6. メンテナンス

• 定期清掃: Keep the inverter clean and free from dust. Ensure ventilation openings are not blocked.
• 接続チェック: すべての電気接続部の締め付け具合や腐食の兆候を定期的に確認してください。
• バッテリーの状態: Monitor battery status via the LCD or mobile app. Ensure batteries are maintained according to their manufacturer's guidelines.
• ファームウェアの更新： Check for available firmware updates to ensure optimal performance and access to new features.

7。 トラブルシューティング

このセクションでは、よくある問題の解決策をご紹介します。より複雑な問題については、カスタマーサポートにお問い合わせください。

• 電力出力なし: Check battery connections, PV input, and AC input. Ensure the inverter is powered on and not in fault mode.
• 障害インジケータオン: Refer to the LCD display for specific fault codes and consult the detailed troubleshooting section in the full manual.
• バッテリーが充電されていません: Verify PV panel connections and sunlight availability. Check charging mode settings.
• 過負荷保護: If an overload occurs, the inverter will shut down. Reduce the load and restart the inverter.

Video 1: This video demonstrates how to communicate with the battery and computer for the 5000W Solar Inverter. While the model differs slightly, the communication principles for battery and computer interaction are similar and can aid in troubleshooting.

8. 仕様

Image 10: A table summarizing the technical specifications of the inverter, including power ratings, voltage, current, and communication features.

9.保証とサポート

For warranty information and technical support, please refer to the official Aninerel webご購入の際は、サイトをご覧いただくか、正規販売店にお問い合わせください。購入証明書として領収書を保管してください。

保護プランは拡張された補償範囲でご利用いただけます:

• 2年間の保護プラン
• 3年間の保護プラン
• 完全保護: 1つのプランで、対象となる過去および将来のすべての購入をカバーします