1. はじめに
The Aninerel ANJ-3KW-24V-LV-WIFI is a 3000W hybrid solar inverter designed to convert 24V DC power to 110V AC pure sine wave power. It provides a continuous output of 3,000W and a peak output of 6,000W. This unit features a built-in 100A MPPT solar charging controller, supporting up to 4,000W PV input with a maximum DC voltage of 500V. It is suitable for off-grid solar systems in various applications, including RVs, homes, cabins, and workshops.
Figure 1: Aninerel 3000W Hybrid Solar Inverter Overview.
This image displays the Aninerel 3000W Single-Phase Hybrid Inverter, highlighting its 3000W rated power, 4000W maximum input power, 50/60Hz rated frequency, 60-500VDC MPPT operating voltage range, and 120V rated output voltage.
Figure 2: Product Application Scenarios.
This image illustrates various application scenarios for the Aninerel hybrid solar inverter, including solar home systems, solar RV systems, solar street light systems, solar power plant systems, solar vessels (boats), and hybrid energy systems.
Figure 3: Single-Phase Off-Grid Inverter System Diagram.
This diagram shows the Aninerel single-phase off-grid inverter integrated into a home solar system, demonstrating how it manages power supply from the grid, solar panels, and battery to power household loads.
2. 重要な安全上の注意事項
Please read all instructions and warnings carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, severe injury, or death. Keep this manual for future reference.
- 有資格者： 設置およびメンテナンスは、有資格者が行う必要があります。
- 換気： Ensure adequate ventilation around the inverter. Do not install in a sealed enclosure.
- 可燃性物質: 可燃物の近くに設置しないでください。
- 水への露出: Avoid exposure to water, rain, or excessive humidity.
- 接地: インバータは適切に接地する必要があります。
- バッテリーの安全性: Work with batteries carefully. Wear eye protection and remove metal jewelry.
- 電源を切る: メンテナンスや配線を行う前に、必ずすべての電源 (PV、AC、バッテリー) を外してください。
- No Parallel Operation: This inverter does not support parallel operation.
3 製品の特徴
- 3000W Hybrid Solar Inverter: Converts DC 24V to pure sine wave AC 110V, delivering 3,000W continuous and 6,000W peak output. Supports up to 4,000W PV input with 100A MPPT solar charging, maximum DC voltage 500V. Features 60A max AC input, 50/60Hz output frequency, starting voltage above 125VDC, and 100A maximum PV charging current.
- Built-in 100A MPPT Solar Charging Controller: Maximizes solar energy harvesting, boosting charging efficiency by up to 30%. Compatible with high-voltage PV arrays (up to 500VDC) for faster charging.
- Smart LCD Screen with Real-Time Monitoring: Responsive LCD screen and indicator LEDs for monitoring power input/output, battery status, and system alerts. Configure settings like charging current, voltage thresholds, and priority modes.
- Flexible Charging & Output Modes: Three charging modes (Solar Only, AC Priority, Hybrid Charging) and three output modes (Mains Priority, PV Priority, Hybrid Output) ensure stable power.
- Supports 24V Batteries: Compatible with AGM, GEL, Lead-acid, Li-ion, and LiFePO4 24V batteries. Includes protections against overvoltage、undervoltage, reverse polarity, and short circuits.
- Durable & Dustproof Design: アルミニウムcasing for enhanced durability, suitable for indoor or semi-outdoor use. Features smart cooling with a variable speed fan.
- 幅広いアプリケーション互換性: Ideal for running essential appliances. Works with municipal power or generators. Note: Does not support parallel operation.
Figure 4: Built-in 100A MPPT with Protection Features.
This image highlights the inverter's built-in 100A MPPT controller and its comprehensive protection features, including overcharge, overload, overcurrent, overvoltage、短絡、過熱、過回転、および電圧不足tage protection, which contribute to extended battery life.
4. 製品コンポーネント以上view
Familiarize yourself with the various components and indicators of your Aninerel hybrid solar inverter.
図5: 前面と背面 View of the Inverter with Labeled Ports.
This image displays the front and rear panels of the Aninerel 3000W Hybrid Solar Inverter. Key components labeled include the LCD display, charging indicator, status indicator, fault indicator, function buttons on the front. On the rear, labels point to the RS485 communication port, grounding terminal, battery input, dry contact port, built-in WiFi, AC input, AC output, PV input, and the power on/off switch.
Figure 6: Detailed Component Diagram of the Inverter.
この図は詳細を示しています view of the inverter's components and their functions. It highlights the LCD display, charging indicator, status indicator, fault indicator, and function buttons on the front. The rear panel shows the RS485 communication port, grounding point, battery input terminals, dry contact port, built-in WiFi module, AC input, AC output, PV input terminals, and the main power on/off switch.
5. セットアップとインストール
Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Refer to the wiring diagram below and follow all local electrical codes.
Figure 7: Typical Solar System Connection Diagram.
This diagram illustrates the connection of the Aninerel hybrid inverter within a solar power system. It shows connections for solar modules (PV input), a 24V battery bank, utility grid input, a generator input, and AC output to household loads. Key specifications for AC input, PV array, and battery type are also indicated.
5.1配線接続
- PV入力接続: Connect your solar modules to the PV input terminals. Ensure the total PV array power does not exceed 4000W and the open circuit voltage is within the 60-500VDC range.
- バッテリー接続: Connect the 24V battery bank to the battery input terminals. Observe correct polarity (positive to positive, negative to negative). The inverter supports various 24V battery types including Lithium, AGM, GEL, and Lead-acid.
- AC 入力接続: Connect the utility grid or a generator to the AC input terminals. The maximum AC input current is 60A.
- AC出力接続: Connect your household loads (appliances) to the AC output terminals. The inverter provides 3000W AC output at 110/120VAC.
- 接地: Ensure the inverter is properly grounded using the designated grounding terminal.
5.2 初期電源投入
- After all connections are secure, turn on the battery breaker first.
- Next, turn on the PV array breaker (if applicable).
- Finally, turn on the AC input breaker (if applicable).
- Switch the inverter's power on/off switch to the 'ON' position.
- Observe the LCD display and indicator LEDs for normal operation.
6。 動作モード
The Aninerel hybrid inverter offers flexible charging and output priority settings to optimize power management based on your needs.
Figure 8: Charging and Load Priority Settings.
This diagram illustrates the configurable charging and load priority settings. Charging priority options include Solar Priority, Solar and AC Input, and Solar Only. Load priority options are Solar Priority, AC Priority, and DC Priority (Battery Priority).
6.1 Charging Priority Modes
These settings control how the battery bank is charged from different power sources.
- 太陽光の優先順位: The inverter prioritizes solar power for charging. AC input will only charge the battery bank when solar power is insufficient or unavailable.
- Solar and AC Input (Hybrid Charging): The inverter charges the battery bank from both solar and AC power simultaneously.
- 太陽光発電のみ: The inverter will only charge the battery bank from available solar power.
6.2 Output Priority Modes (Load Priority)
These settings control how your appliances receive power.
- Solar Priority (PV Priority): The inverter will supply the load first from solar power. If solar power is not enough, it will compensate from the AC input or battery.
- AC Priority (Mains Priority): The inverter will redirect the AC input to power all loads. DC power (battery/solar) is used only when AC input is not available.
- DC Priority (Hybrid Output): The inverter prioritizes drawing power from the battery/solar. It will only switch to AC input when the battery voltage が設定されたしきい値を下回ります。
7. バッテリーの互換性
The Aninerel hybrid inverter is designed to be compatible with a wide range of 24V battery types, offering flexibility for various energy storage solutions.
Figure 9: Multi-Battery Compatibility.
This image highlights the inverter's compatibility with various 24V battery types, including AGM, GEL, FLD (Flooded), LI (Lithium-ion), and LiFePO4 batteries. It also mentions a maximum battery charging current of 100A (AC+DC).
The inverter fully supports the following 24V battery chemistries:
- AGM（吸収ガラスマット）
- ゲル
- Lead-acid (Flooded)
- Liイオン（リチウムイオン）
- LiFePO4（リチウム鉄リン酸塩）
It also supports direct solar-to-load applications without a battery, if configured appropriately. Built-in protections against overvoltage、undervoltage, reverse polarity, and short circuits help extend battery lifespan and ensure system safety.
8. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your Aninerel hybrid solar inverter.
- クリーニング： インバーターの外装を定期的に清掃し、通気口に埃やゴミが詰まっていないことを確認してください。乾いた柔らかい布を使用してください。
- 接続: Annually inspect all wiring connections (PV, battery, AC input/output) for tightness and signs of corrosion. Tighten any loose connections.
- バッテリーの検査: 鉛蓄電池を使用する場合は、電池製造元のガイドラインに従って電解液レベルと端子の状態を確認してください。
- 環境： 設置環境が指定された温度と湿度の範囲内であることを確認してください。
- ファームウェアの更新： メーカーの webパフォーマンスの向上や新機能の追加のためのファームウェア アップデートが利用可能かどうかは、サイトをご覧ください。
9。 トラブルシューティング
このセクションでは、よくある問題に対する基本的なトラブルシューティング手順を説明します。より複雑な問題については、テクニカルサポートにお問い合わせください。
9.1 一般的な問題と解決策
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| インバータがオンにならない | バッテリー接続なし、バッテリー残量低下tage、電源スイッチがオフ、ヒューズが切れている。 | バッテリーの接続と容量を確認してくださいtage. Ensure power switch is ON. Check and replace fuses if necessary. |
| AC出力なし | Overload, short circuit, low battery, AC output breaker tripped. | Reduce load. Check for short circuits. Recharge battery. Reset AC output breaker. |
| 太陽光充電なし | PV array disconnected, low solar irradiance, PV voltage too low/high, MPPT fault. | Check PV connections. Ensure sufficient sunlight. Verify PV voltageは動作範囲内です。 |
| 異常な騒音 | Overload, loose components, fan issue. | Reduce load. Inspect for loose parts. Ensure fan is not obstructed. |
10. 技術仕様
Below are the detailed technical specifications for the Aninerel ANJ-3KW-24V-LV-WIFI Hybrid Solar Inverter.
図 10: 詳細な技術仕様。
This table provides comprehensive technical specifications for the ANJ-3KW-LV-WIFI model, including rated output power, peak power, rated output voltage, AC frequency, waveform, acceptable voltage range, battery type compatibility, charging parameters, PV array details, communication support, dimensions, and weight.
| パラメータ | 価値 |
|---|---|
| モデル | ANJ-3KW-24V-LV-WIFI |
| Rated Output Power | 3000W |
| 最大ピーク電力 | 6000VA |
| 定格出力Voltage | 120Vac±5％ |
| 定格AC周波数 | 50Hz/60Hz（自動検知） |
| 出力波形 | 純粋な正弦波 |
| 許容量tage Range (Personal Computer) | 95-140VAC |
| 許容量tageレンジ（家電製品） | 70-140VAC |
| Mains/Generator Input Range | (90VAC~140Vac) ±2% |
| 電池のタイプ | Lithium/Lead-acid batteries |
| 定格バッテリーVoltage | 24VDC |
| フローティングチャージVoltage | 27VDC |
| 過充電保護 | 32VDC |
| 充電方法 | 履歴書 |
| 最大PVアレイ電力 | 4000W |
| 最大。 MPPT充電電流 | 100A |
| Max. Mains/Generator Charging Current | 100A |
| 最大ハイブリッド充電電流 | 100A |
| Num. of MPPT trackers | 1 |
| 最大入力電流 | 27A |
| 最大巻tag開回路のe | 500Vdc |
| MPPTVol。tage範囲 | 60〜450 Vdc |
| MPPT 追跡効率 | 95% |
| Support Communication | Dry contact + RS485 + WiFi |
| 寸法 | 18.7インチ x 15.35インチ x 7.08インチ |
| 重さ | 8.5kg / 18.7ポンド |
11. 保証とサポート
Your Aninerel ANJ-3KW-24V-LV-WIFI Hybrid Solar Inverter comes with an instruction manual and a WiFi antenna. For technical support, warranty claims, or any inquiries, please contact Aninerel customer service.
カスタマーサポート連絡先:
- メールアドレス: anenji168@outlook.com
- 電話： +86 188 0375 9233
- 営業時間（PDT）: 9 AM - 6 PM
Figure 11: Aninerel Customer Support Details.
This image provides contact information for Aninerel customer support, including an email address, phone number, and operating hours in PDT.
