1.製品オーバーview
The JODSONE UV LED Nail Lamp is designed for efficient curing of various nail products, including gel polishes, nail tips, and extensions. Its 2-in-1 design and smart sensor technology provide a convenient and effective solution for both individual nail tips and full-hand applications.
This manual provides detailed instructions for the setup, operation, and maintenance of your JODSONE nail lamp 最適なパフォーマンスと長寿命を保証します。
2. セットアップ手順
- デバイスを開梱します。 Carefully remove the JODSONE UV LED Nail Lamp and its accessories from the packaging. Ensure all components, including the lamp unit and power adapter, are present.
- 接続電源： Insert the power adapter cable into the designated port on the back of the nail lamp. Plug the other end of the adapter into a standard electrical outlet.
- 配置: Place the nail lamp on a stable, flat surface. Ensure there is adequate space around the device for proper ventilation and ease of use.
- Detachable Base (Optional): Lamp features a detachable base, which can be removed for pedicure use or easier cleaning. To detach, gently pull the base downwards. To reattach, align the base with the main unit and push upwards until it clicks into place.
3. 操作手順
3.1. タイマー設定
The JODSONE nail lamp offers multiple timer options for precise curing:
- 30S: Short curing time for thin gel layers or quick touch-ups.
- 60S: Standard curing time for most gel polishes.
- 90S: Extended curing time for thicker gel layers or specific products.
- 60S (Front Light): A dedicated button for the front headlight, allowing instant on/off operation for curing individual nail tips or specific areas. This setting does not utilize the automatic sensor.
- 120S (Low Heat Mode): This mode is designed for sensitive nails or builder gels that may cause a heat spike. It gradually increases the light intensity to minimize discomfort. This mode is activated by the smart infrared sensor.
3.2. Smart Infrared Sensor
Lamp is equipped with a smart infrared sensor for automatic operation. When your hand or foot is inserted into the lamp, the sensor detects its presence and automatically activates the curing process. When your hand or foot is removed, the light will turn off. In automatic mode, the default curing time is 120 seconds (Low Heat Mode).
3.3. Curing Process
- Prepare Nails: Apply your desired base coat, gel polish, or top coat according to the product's instructions.
- タイマーを選択: Choose the appropriate curing time (30S, 60S, 90S) by pressing the corresponding button on the top of the lamp. For individual tips, use the 60S (Front Light) button.
- Insert Hand/Foot: 手または足をlに置きますamp. If a timer button was pressed, the curing cycle will begin. If no timer button was pressed, the smart sensor will activate the 120S Low Heat Mode.
- 治す： Keep your hand or foot inside the lamp until the selected timer counts down to zero, or until the automatic cycle completes.
- 繰り返す： Repeat the process for each layer of gel polish or for the other hand/foot as needed.
4 製品の特徴
- Advanced Curing Technology: Equipped with upgraded UV LED beads for fast and efficient curing of all types of gel polishes, including base coats, top coats, color gels, acrylic gels, builder gels, nail tips, and press-ons.
- 2-in-1デザイン: Versatile design allows for curing individual nail tip extensions or full-hand drying, making it suitable for various nail art scenarios and daily touch-ups.
- 複数のタイマー設定: Features 30S, 60S, 90S, and a dedicated 60S (front light) button for precise control over curing times.
- スマート赤外線センサー: Automatic on/off functionality when hands or feet are inserted or removed, enhancing convenience and energy efficiency.
- Low Heat Mode (120S): A gentle curing option that gradually increases light intensity to prevent heat spikes, ideal for sensitive nails or specific gel types.
Image: The JODSONE UV LED Nail Lamp is shown next to a generic nail lamp. The JODSONE lamp is labeled "Two-in-one Design for nail tip and gel nail polish and so on," with an arrow pointing to its internal structure showing multiple LED lights. The generic lamp is labeled "Only for gel nail polish." This illustrates the versatility of the JODSONE lamp.
画像: トップダウン view of the JODSONE UV LED Nail Lamp with a hand placed inside. To the right, three circular icons indicate "30S Timer For Quick Dry Nail Polish," "60S Timer For Thin Gel Nail Polish," and "90S Timer For All Gel Types," demonstrating the preset timer options.
Image: A close-up of the JODSONE UV LED Nail Lamp's control panel, specifically highlighting the "60S (Front Light)" button. A finger is shown pressing this button, and the front light of the lamp is illuminated, indicating its function for targeted curing.
Image: This image illustrates the "120S Infrared Sensor Control" feature of the JODSONE UV LED Nail Lamp. It shows two states: "HANDS IN Lamp On" with a hand inside the illuminated lamp, and "HANDS OUT Lamp Off" with the hand removed and the lamp off, demonstrating the automatic sensor functionality.
画像: コラージュショーasing the versatility of the JODSONE UV LED Nail Lamp. Four quadrants display different nail applications: "False Nails," "Extension Nail," "Gel Nail Polish," and "Diamond Nail Art," all implying the lamp's ability to cure these various styles.
5. メンテナンス
- クリーニング： Regularly wipe the exterior of the lamp with a soft, dry cloth. For stubborn stains, a slightly damp 液体がデバイス内に入らないように、中性洗剤を含ませた布を使用してください。
- インテリアクリーニング： The detachable base allows for easy cleaning of the interior. Remove the base and wipe down the reflective surfaces and LED beads with a soft, dry cloth to maintain optimal light output.
- ストレージ： 使用しないときは釘を保管してください。amp 直射日光や湿気を避け、涼しく乾燥した場所に保管してください。
- 刺激の強い化学物質を避ける: Do not use abrasive cleaners, solvents, or harsh chemicals on any part of the lamp, as this may damage the finish or internal components.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lamp オンになりません。 | 電源アダプターが正しく接続されていないか、コンセントから電源が供給されていません。 | 電源アダプタが両方のコンセントにしっかりと差し込まれていることを確認してください。amp 正常に機能するコンセント。別の機器でコンセントをテストしてください。 |
| Gel polish is not curing completely. | Incorrect curing time, too thick gel layer, or expired gel polish. | Increase curing time, apply thinner layers of gel, or check the expiration date of your gel polish. Ensure your hand is positioned correctly to receive full light exposure. |
| Smart sensor not activating. | Obstruction of the sensor or incorrect hand placement. | Ensure nothing is blocking the infrared sensor. Place your hand or foot fully into the lamp's opening. Note that the 60S (Front Light) button bypasses the sensor. |
| Heat spike during curing. | Sensitive nails or thick application of builder gel. | Use the 120S Low Heat Mode. Apply thinner layers of gel. If discomfort persists, remove hand briefly and reinsert. |
7. 製品仕様
- ブランド： JODSONE
- モデル： SUNX5 Max Nail Lamp
- タイプ： UV LEDネイルLamp
- 色： 白雪姫
- タイマー設定 30S, 60S, 90S, 60S (Front Light), 120S (Low Heat Mode with Smart Sensor)
- センサー： Smart Infrared Sensor
- デザイン： 2-in-1 for nail tips and full-hand curing, detachable base
- 寸法: 約7.8×7.17×3.9インチ
- 重さ： 約13.76オンス
- 電源: Corded Electric (Power adapter included)
8. 保証とサポート
For any quality concerns or technical support regarding your JODSONE UV LED Nail Lamp, please contact JODSONE customer service. Refer to the contact information provided in your product packaging or visit the official JODSONE webサポートサイト。
保証のために購入領収書を保管してください。