IINCOOY 10W LED Floodlight IP66 Waterproof Outdoor Projector User Manual

1. はじめに

Thank you for choosing the IINCOOY 10W LED Floodlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new floodlight. Please read these instructions carefully before use and retain them for future reference. This LED floodlight is designed for both indoor and outdoor applications, offering bright, energy-efficient illumination with a durable, waterproof design.

2. 安全情報

• 電気安全: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before installation, maintenance, or cleaning.
• 接地: This product requires proper grounding to prevent electric shock. Ensure the ground wire is correctly connected.
• 耐水性: The floodlight is rated IP66, meaning it is protected against powerful water jets and dust. However, it is ない designed for submersion in water. Do not use it underwater.
• 温度： Operate the floodlight within the specified working temperature range of -35°C to +55°C.
• プラグは付属しません: This floodlight does not come with a pre-attached plug. It requires direct wiring. If a plug-and-play solution is needed, this product may not be suitable.
• 光源： LED 光源が点灯しているときは、直接見ないでください。目の疲れや損傷の原因となる可能性があります。

3. パッケージ内容

パッケージを開封したら、すべてのコンポーネントが揃っていて損傷がないことを確認してください。

• 1 x IINCOOY 10W LED Floodlight
• インストール手順マニュアル x 1

4.製品オーバーview

The IINCOOY 10W LED Floodlight is an ultra-slim, high-efficiency lighting solution designed for various applications. Its robust construction ensures longevity and reliable performance in diverse environments.

主な特徴:

• High Light Efficiency: Delivers 700 lumens, providing effective illumination while saving up to 90% energy compared to traditional halogen floodlights.
• 耐久性のある構造: Features a tempered glass mask for high light transmittance and hardness, and a die-cast aluminum shell to prevent rust and extend lifespan.
• IP66耐候性: Fully sealed design ensures protection against dust and powerful water jets, suitable for outdoor use in various weather conditions.
• 柔軟な設置: Equipped with an adjustable metal bracket for mounting on ceilings, walls, or floors, allowing for precise light direction.
• 広いビーム角度: A 120-degree luminous angle ensures broad coverage.
• 長寿命: LED life exceeds 50,000 hours.

Figure 1: The IINCOOY 10W LED Floodlight demonstrating its IP66 waterproof capability under simulated rain conditions.

Figure 2: Illustration of the floodlight's 120-degree wide beam angle, providing extensive illumination for areas like a garage entrance.

Figure 3: The floodlight illuminating a house entrance, highlighting its super bright output of 700 lumens and cool white color temperature.

Figure 4: Summary of the 10W LED Floodlight's core features, including brightness, beam angle, and lifespan.

5. 仕様

Figure 5: Detailed dimensions of the floodlight and visual guides for wall mounting, adjusting the angle, and connecting the ground wire.

6. セットアップとインストール

Follow these steps for proper installation of your LED floodlight. Ensure power is OFF before beginning.

1. 場所を選択してください： Select a suitable location for mounting, such as a wall, ceiling, or floor. Consider the desired illumination area and beam angle.
2. 取り付け: Use the adjustable metal bracket to secure the floodlight. Mark the drilling points on the surface, drill holes, and attach the bracket using appropriate screws and anchors (not included). Ensure the bracket is firmly fixed.
3. 角度の調整： Once mounted, adjust the floodlight's angle to direct the light as needed. The bracket allows for flexible positioning.
4. 配線：
   • The floodlight comes with a 50cm power cord but no plug. It requires direct wiring to your electrical system.
   • Connect the live (brown), neutral (blue), and ground (yellow/green) wires from the floodlight to your main power supply wires. Ensure all connections are secure and insulated with waterproof connectors suitable for outdoor use if applicable.
   • 重要： Proper grounding is crucial for safety. Connect the yellow/green wire to the ground terminal of your electrical system.
5. テスト： After installation and wiring are complete, restore power and test the floodlight.

7. 操作手順

The IINCOOY 10W LED Floodlight operates simply by connecting it to a power source. There are no complex controls or settings.

• 電源オン/オフ: The floodlight will illuminate when power is supplied and turn off when power is disconnected. Control can be managed via a wall switch, timer, or smart plug connected to its power source.
• 使用環境： Suitable for various indoor and outdoor applications including garages, gardens, patios, workshops, backyards, and for illuminating billboards or building facades.

図6：例amples of the floodlight in use, providing bright illumination for various outdoor settings such as driveways, gardens, and pathways.

8. メンテナンス

定期的なメンテナンスを行うことで、投光器の寿命が長くなり、最適なパフォーマンスが確保されます。

• クリーニング： Periodically clean the tempered glass mask with a soft, damp cloth to remove dirt, dust, or debris that may obstruct light output. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• 検査： Regularly inspect the power cord and connections for any signs of damage, wear, or corrosion. Ensure all mounting screws remain tight.
• ユーザーが修理可能な部品はありません: The LED light source is integrated and not user-replaceable. Do not attempt to open or repair the floodlight yourself. Contact qualified personnel for any issues beyond basic maintenance.

9。 トラブルシューティング

フラッドライトで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

これらの解決策を試しても問題が解決しない場合は、カスタマー サポートまたは資格のある電気技師にお問い合わせください。

10. 保証とサポート

This product is manufactured to high-quality standards. For any questions, technical assistance, or support regarding your IINCOOY 10W LED Floodlight, please refer to the retailer's return policy or contact the manufacturer directly through their official channels. Please retain your proof of purchase for any warranty claims.