導入
This manual provides essential information for the safe and efficient use of your Getac B300 G7 Fully Rugged Notebook. Please read this manual thoroughly before operating the device and retain it for future reference.
The Getac B300 G7 is designed for demanding environments, featuring MIL-STD-810G and IP65 certifications for resistance against shock, vibration, dust, and water.
設定
1. 開梱と初期検査
Carefully remove the notebook and all accessories from the packaging. Inspect the device for any signs of damage. If any damage is found, contact your vendor immediately.
2. 電源の接続
Before initial use, ensure the battery is fully charged. Connect the AC adapter to the notebook's DC-in jack and then to a power outlet.
- ACアダプター: 90W
- バッテリー: Li-on 10.8V

Figure 1: Left side of the Getac B300 G7, showing various ports including the power input.
3. 最初の起動
Press the power button to turn on the notebook. The device will boot into Windows 11 Pro. Follow the on-screen instructions to complete the initial setup of the operating system.
4. 周辺機器の接続
The Getac B300 G7 offers multiple ports for connecting external devices:
- USB3.0: 3 ports for connecting USB devices like external drives, keyboards, or mice.
- LAN(RJ45): 有線ネットワーク接続用。
- HDMI: 外部ディスプレイに接続します。
- External VGA: 古い外部ディスプレイに接続します。
- シリアルポート: 2 ports for legacy device connectivity.
- Microphone (Mini-jack): For external microphone input.
- Audio Output (Mini-jack): ヘッドフォンまたは外部スピーカー用。
- ドッキングコネクタ: 互換性のあるドッキング ステーションに接続します。

Figure 2: Right side of the Getac B300 G7, showing additional ports.
Operating the Notebook
1. 電源のオン/オフ
- 電源を入れるには: デバイスにある電源ボタンを押します。
- 電源を切るには: Use the Windows Start menu to select 'Shut down'. Avoid forced shutdowns unless necessary to prevent data loss.
2. ディスプレイとタッチスクリーン
The notebook features a 13.3-inch TFT LCD XGA (1024 x 768) touchscreen display with 700 nits brightness. You can interact with the display using your finger or a compatible stylus (not included).
- タッチジェスチャー: Standard Windows 11 touch gestures are supported.
- 明るさ調整: Adjust display brightness through Windows settings or dedicated function keys (if available).
3. キーボードと入力デバイス
The Getac B300 G7 includes a backlit keyboard for use in low-light conditions. The integrated touchpad can be used for cursor control. An Insertable Smartcard Reader is also available for secure access applications.
- バックライト制御: Use the appropriate function key combination to toggle or adjust keyboard backlight.
- Smartcard Reader: Insert your smartcard into the designated slot for authentication or data access.
4. 光学ドライブ
The notebook is equipped with a DVD Super Multi Drive. This allows you to read and write various CD and DVD formats.
- ディスクの挿入: Gently push the disc into the drive until it clicks into place.
- ディスクの取り出し: Use the eject button on the drive or the eject option in Windows File エクスプローラ。
5. オペレーティングシステム
Your Getac B300 G7 comes with Windows 11 Pro pre-installed. Refer to Microsoft's documentation for detailed information on using Windows 11 Pro features and functionalities.
メンテナンス
1. Cleaning the Notebook
- 外観: 柔らかくてamp cloth with a mild cleaning solution. Avoid harsh chemicals or abrasive materials.
- 画面: Use a microfiber cloth specifically designed for screens. Do not spray cleaners directly onto the screen.
- ポート: Ensure ports are free of dust and debris. Use compressed air if necessary, holding the can upright.
2. バッテリーのお手入れ
バッテリー寿命とパフォーマンスを最大限に高めるには:
- 極端な温度を避けてください。
- バッテリーを頻繁に完全に放電しないでください。
- If storing the notebook for an extended period, charge the battery to approximately 50-60% before storage.
3. 堅牢な機能
While the B300 G7 is designed to be rugged, proper care is still essential:
- Ensure all port covers are securely closed to maintain IP65 dust and water resistance.
- Avoid unnecessary drops or impacts, even though the device is MIL-STD-810G certified.
- Clean any mud or dirt from the casing promptly.

図3:上 view of the Getac B300 G7, showcasin堅牢な設計です。
トラブルシューティング
This section addresses common issues you might encounter with your Getac B300 G7 notebook.
1. Notebook Does Not Power On
- Ensure the AC adapter is securely connected to both the notebook and a working power outlet.
- Verify the battery is charged. If the battery is completely drained, it may take a few minutes of charging before the notebook can power on.
- Try removing and reinserting the battery (if user-removable) to reset it.
2. 表示の問題
- 表示なし: Connect an external monitor to the HDMI or VGA port to check if the issue is with the internal display.
- 薄暗いディスプレイ: Adjust the brightness settings in Windows or using the keyboard function keys.
- タッチスクリーンが反応しない: Restart the notebook. If the issue persists, check for driver updates in Windows Device Manager.
3. Peripheral Devices Not Working
- デバイスが正しいポートに正しく接続されていることを確認してください。
- Try connecting the device to a different port or another computer to rule out device malfunction.
- Check Windows Device Manager for any driver issues related to the peripheral.
4. システムパフォーマンスの問題
- バックグラウンドで実行されている不要なアプリケーションを閉じます。
- Windows とドライバーが最新であることを確認します。
- ディスク クリーンアップとデフラグを実行します (HDD の場合、SSD の場合は必要ありません)。
- マルウェアやウイルスがないか確認します。
仕様
| 特徴 | 説明 |
|---|---|
| モデル名 | B300 G7 |
| プロセッサ | Intel Core i5-8350U (1.7 GHz, up to 3.6 GHz with Turbo Boost, 6MB Cache) |
| ラム | 16GB DDR4 (2400 MHz), Max 32GB |
| ストレージ | 512GB SSD |
| 画面 | 13.3-inch TFT LCD XGA (1024 x 768), 700 nits, Touchscreen |
| グラフィックス | 統合型インテル UHD グラフィックス 620 |
| オペレーティング·システム | ウィンドウズ11プロ |
| 光学ドライブ | DVD Super Multi Drive |
| ポート | USB 3.0 x 3, LAN (RJ45), HDMI, External VGA, Serial Port x 2, Microphone (Mini-jack), Audio Output (Mini-jack), DC-in Jack, Docking Connector |
| 特集 | Backlit Keyboard, Insertable Smartcard Reader |
| Rugged Certification | MIL-STD-810G、IP65 |
| 寸法(長さ×幅×高さ) | 11.9インチ x 10.35インチ x 2.36インチ |
| 重さ | 7.7ポンド |
| 接続性 | Ethernet (No Wi-Fi, No Bluetooth) |
| 含まれるもの | Li-on battery 10.8V, AC Adapter 90W |

図4:上 view of the Getac B300 G7, highlighting its robust casing and integrated handle for portability.
保証情報
This Getac B300 G7 notebook comes with a 90日間の限定保証この保証は、保証期間中の通常使用における材料および製造上の欠陥をカバーします。
以下のものは保証の対象外となります:
- 事故、乱用、誤用、洪水、火災、地震、またはその他の外部要因によって引き起こされた損傷。
- Damage caused by operating the product outside the permitted or intended uses described by Getac.
- Damage caused by service performed by anyone who is not an authorized service provider.
- Products or parts that have been modified to alter functionality or capability without the written permission of Getac.
For specific terms and conditions, please refer to the warranty documentation provided with your purchase or contact your vendor.
サポート
If you encounter issues that cannot be resolved using the troubleshooting guide in this manual, please contact your vendor or an authorized service center for assistance. When contacting support, please have your model number (B300 G7) and serial number ready.
For the latest drivers, software updates, and additional support resources, please visit the official Getac support webサイト。