Technics SL-40CBT Direct Drive Turntable Instruction Manual

1. 重要な安全上の注意事項

Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, and injury to persons. Read all instructions carefully before use and retain them for future reference. Do not expose this appliance to rain or moisture. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliifiers) 熱を生成します。 メーカーが指定したアタッチメント/アクセサリーのみを使用してください。

2. 箱の中身

梱包材を廃棄する前に、すべてのコンポーネントを慎重に開梱し、すべてのアイテムが揃っていることを確認してください。

• ターンテーブルユニット
• 大皿
• ターンテーブルマット
• ダストカバー
• AC電源コード
• バランスウェイト
• EP Record Adapter
• Head Shell with Cartridge (Audio-Technica AT-VM95C)
• PHONO Cable
• PHONO Earth Lead

開梱プロセス

This video demonstrates the unboxing process for the Technics SL-50C / 40C Series turntables. It shows how to carefully remove cushioning materials, the dust cover, and the turntable unit from the packaging. The turntable mat is typically packaged inside the dust cover.

3. セットアップ

3.1 配置

Place the turntable on a level and stable surface to ensure optimal performance and prevent vibrations from affecting playback quality. The turntable features vibration-resistant feet that can be adjusted to level the unit on uneven surfaces.

3.2 Platter and Mat Installation

Gently place the aluminum platter onto the turntable spindle. Ensure it sits securely. Then, place the turntable mat on top of the platter.

3.3 Tonearm and Cartridge Assembly

1. トーンアーム後部にバランスウェイトを取り付けます。
2. Carefully attach the included Audio-Technica AT-VM95C cartridge to the head shell.
3. Remove the stylus cover from the cartridge.
4. トーンアームclを解放しますamp and ensure the tonearm is level.
5. Balance the tonearm by adjusting the balance weight until the tonearm floats horizontally.
6. Set the numbered ring on the balance weight to zero.
7. Turn the entire balance weight to match the recommended stylus pressure for the AT-VM95C cartridge (2g for SL-40CBT).
8. Set the anti-skating control to match the stylus pressure setting.

3.4電源接続

Connect the supplied AC power supply cord to the 'AC IN' terminal on the rear of the turntable and then to a wall outlet.

3.5オーディオ接続

The SL-40CBT offers multiple ways to connect to your audio system:

1. LINE OUT (Using Built-in Phono Preamp)

もしあなたの amplifier or active speakers do not have a dedicated PHONO input, use the turntable's built-in phono preamp. Set the 'PHONO T LINE / &#'x24; ' switch on the rear panel to 'LINE'. Connect the RCA stereo cable from the 'LINE OUT' terminals on the turntable to an auxiliary input (e.g., AUX IN, LINE IN) on your ampライファまたはアクティブスピーカー。

This video segment demonstrates connecting the turntable using the LINE OUT option to an amplifier and speakers, or directly to active speakers. Ensure the switch is set to LINE.

2. PHONO OUT (Using External Phono Preamp)

If you prefer to use an external phono preamp, set the 'PHONO T LINE / &#'x24; ' switch on the rear panel to 'PHONO'. Connect the RCA stereo cable from the 'PHONO OUT' terminals on the turntable to the input of your external phono preamp. Then, connect the output of the external phono preamp to an auxiliary input on your amplifier or active speakers. Connect the PHONO EARTH lead from the turntable to the ground terminal on your external phono preamp or ampハム音を軽減するリファイア。

This video segment illustrates connecting the turntable using the PHONO OUT option to an external phono preamp and then to an amplifier or active speakers. Ensure the switch is set to PHONO.

3.Bluetooth®接続

The SL-40CBT model supports Bluetooth for wireless connection to compatible speakers or headphones. Set the 'PHONO T LINE / &#'x24; ' switch on the rear panel to '&#'x24; '. The turntable supports Qualcomm® aptX™ Adaptive and SBC codecs.

This video segment details how to connect the SL-40CBT turntable wirelessly via Bluetooth to speakers or headphones. Press the Bluetooth button on the control panel to initiate pairing.

4. ターンテーブルの操作

4.1 電源オン/オフ

Press the power button (&#'x24; /I) on the control panel to turn the turntable on or off. The indicator light will illuminate when the unit is powered on.

4.2 レコードの再生

1. Place a record on the turntable platter. Handle records by the edges and center label to avoid damaging the grooves.
2. Select the appropriate rotation speed (33 or 45 RPM) using the buttons on the control panel.
3. START/STOP ボタンを押してプラッターの回転を開始します。
4. Lift the tonearm using the cueing lever and carefully position it over the desired groove on the record.
5. キューイングレバーをゆっくり下げて、スタイラスをレコードの上に静かに置きます。
6. At the end of playback, lift the tonearm using the cueing lever and return it to the tonearm rest. Press the START/STOP button to stop platter rotation.

4.3Bluetoothペアリング

Bluetoothデバイスとペアリングするには：

1. Ensure the turntable is powered on and the 'PHONO T LINE / &#'x24; ' switch is set to '&#'x24; '.
2. Bluetooth スピーカーまたはヘッドフォンをペアリング モードにします。
3. Press and hold the Bluetooth button on the turntable's control panel until the indicator light flashes, indicating pairing mode.
4. Once connected, the Bluetooth indicator light will illuminate steadily.

5. メンテナンス

5.1 スタイラスのクリーニング

Regularly clean the stylus using a soft brush designed for stylus cleaning. Brush gently from back to front to remove dust and debris. A dirty stylus can cause distorted sound and damage your records.

5.2 Cleaning the Unit and Dust Cover

Wipe the turntable unit and dust cover with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and then dry thoroughly. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.

5.3 Replacing the Stylus

The stylus has a limited lifespan and should be replaced periodically (typically after 300-500 hours of playback) to maintain sound quality and prevent record wear. Refer to the cartridge manufacturer's instructions for specific stylus replacement procedures.

6。 トラブルシューティング

If you experience issues with your turntable, consult the following common troubleshooting tips:

• 音が出ない: Check all audio cable connections, ensure the 'PHONO T LINE / &#'x24; ' switch is set correctly (LINE for built-in preamp, PHONO for external preamp, &#'x24; for Bluetooth), and verify your ampスピーカー/コントローラの電源がオンになっており、正しい入力に設定されています。
• 歪んだ音: Ensure the stylus is clean and properly seated. Check the tonearm balance and anti-skating settings. Verify that the record is clean and free of dust.
• 速度が正しくありません: Confirm that the correct speed (33 or 45 RPM) is selected for the record being played.
• Bluetooth接続の問題: Ensure both the turntable and your Bluetooth device are in pairing mode and within range. Try restarting both devices.
• ハミングノイズ： Ensure the PHONO EARTH lead is properly connected if using PHONO OUT. Check for any nearby electronic devices causing interference.

For further assistance, refer to the official Technics support resources or contact customer service.

7. 仕様

8. 保証とサポート

8.1製品保証

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or the official Technics web保証条件、条項、期間に関する詳細情報については、サイトをご覧ください。

8.2 カスタマーサポート

For technical support, service, or inquiries, please visit the official Technics support website or contact their customer service department. Contact information can typically be found in your product documentation or on the Technics brand webサイト。