TRESKO 2000W Standing Infrared Heater (B0FPD9RF1Z)

TRESKO 2000W Infrared Standing Heater Instruction Manual

Model: 2000W Standing Infrared Heater (B0FPD9RF1Z)

Brand: TRESKO

1. 重要な安全情報

Please read this instruction manual carefully before using the TRESKO Infrared Standing Heater. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

  • 電気安全: Ensure the heater is connected to a properly grounded outlet with the correct voltage (230V AC). Do not overload electrical circuits. Always unplug the heater before cleaning or maintenance.
  • 配置: Place the heater on a firm, level, and stable surface to prevent tipping. Maintain a safe distance from combustible materials such as furniture, curtains, and other flammable objects. Do not cover the heater.
  • 屋内/屋外での使用: This heater is designed for both indoor and outdoor use, featuring an IP34 protection rating, making it waterproof and corrosion-resistant. However, avoid direct exposure to heavy rain or extreme weather conditions.
  • 転倒防止安全装置: The heater is equipped with an anti-tip safety switch that automatically shuts off the unit if it is accidentally knocked over. Ensure this feature is not obstructed.
  • 子供とペット: Keep children and pets away from the heater, especially when it is in operation, as surfaces can become very hot.
  • 換気: Ensure adequate ventilation when using the heater indoors.
  • 破損したコード/プラグ: Do not operate the heater with a damaged cord or plug. Contact customer support for assistance.
TRESKO Infrared Heater with anti-tip safety feature illustrated, showing automatic shut-off when tilted.

Image 1: Anti-tip safety feature. The heater automatically shuts off if it is tilted or knocked over, enhancing safety.

2.製品オーバーview およびコンポーネント

The TRESKO 2000W Infrared Standing Heater provides efficient and instant heat using a carbon tube element. It features a robust aluminum housing and a stainless steel protective grille for durability.

主な特徴:

  • Instant Heat Technology: Heats up in seconds.
  • エネルギー効率: Carbon tube technology is 30% more economical than standard halogen tubes.
  • 調整可能な熱レベル: Three power settings (650W, 1350W, 2000W).
  • リモートコントロール: 離れた場所からでも操作が便利。
  • タイマー機能: Programmable shut-off from 1 to 24 hours.
  • 静かな動作: Extremely low noise level, suitable for various environments.
  • 耐久性のある構造: Stainless steel protective grille and aluminum housing.
  • 転倒防止安全装置: Automatic shut-off upon accidental tipping.
  • 耐候性: IP34 rated for indoor and outdoor use, waterproof and corrosion-resistant.
TRESKO Infrared Heater showing dimensions, weight, cable length, protective grille, and remote control.

画像2: 以上view of the TRESKO Infrared Heater, highlighting its dimensions, weight, cable length, protective grille, and the included remote control.

3. セットアップ手順

Follow these steps to assemble and prepare your heater for use.

  1. 開梱: すべての部品をパッケージから慎重に取り出してください。パッケージは保管するか、必要に応じて返品してください。
  2. ベースアセンブリ: Attach the large footplate to the base of the heater column using the provided screws. Ensure it is securely fastened for robust stability.
  3. 配置: Position the heater on a flat, stable, and non-combustible surface. Ensure there is at least 1 meter (3 feet) of clearance from any walls, furniture, or other objects.
  4. 電源接続: Plug the power cord into a suitable 230V AC grounded electrical outlet. Ensure the main power switch on the unit is in the OFF position before plugging in.
TRESKO Infrared Heater base and features like anti-tip switch, carbon tube, and 2000W power.

Image 3: Stable design and key features, including the anti-tip switch and carbon heating element.

4. 操作手順

Your TRESKO Infrared Heater can be operated using the control panel on the unit or the included remote control.

4.1 電源のオン/オフ

  • 主電源スイッチ: Locate the waterproof main power switch, usually at the bottom or rear of the unit. Flip it to the 'ON' position.
  • Unit Control Panel / Remote Control: 電源ボタンを押します(U) on the unit's control panel or the remote control to turn the heater on. Press it again to turn off.

4.2 火力調整

ヒーターには 3 つの熱設定があります。

  • レベル1: 650W
  • レベル2: 1350W
  • レベル3: 2000W

Use the corresponding buttons (650W, 1350W, 2000W) on the remote control to select your desired heat level. The unit will display the current setting.

4.3 タイマー機能

The timer function allows you to set the heater to automatically turn off after a specified period (1 to 24 hours).

  • リモコンの「TIMER」ボタンを押します。
  • Each press will increase the timer setting by one hour. The display will show the set duration.
  • The heater will operate for the set duration and then automatically switch off.
TRESKO Infrared Heater remote control showing power, 650W, 1350W, 2000W, and timer buttons.

Image 4: Remote control functions for power, heat levels, and timer settings.

5. メンテナンス

定期的なメンテナンスにより、ヒーターの最適なパフォーマンスと寿命が確保されます。

  • クリーニング: 掃除をする前に必ずヒーターのプラグを抜き、完全に冷ましてください。柔らかくて乾いた布を使用してください。amp 外側の表面を拭く際は布を使用してください。研磨剤入りの洗剤や溶剤は使用しないでください。内部部品に水が入らないようにしてください。
  • 保護グリル: Periodically check the stainless steel protective grille for any obstructions or damage. Clean gently if dust or debris accumulates.
  • ストレージ: If storing the heater for an extended period, ensure it is clean and dry. Store it in a cool, dry place. The product includes an outdoor cover for protection against elements when not in use.
  • 検査: Regularly inspect the power cord and plug for any signs of damage. If damage is found, do not use the heater and contact customer support.
TRESKO Infrared Heater in outdoor setting, highlighting its weather-resistant housing and included outdoor cover.

Image 5: Weather-resistant housing and the included outdoor cover for protection.

6。 トラブルシューティング

If you encounter issues with your TRESKO Infrared Heater, refer to the following common problems and solutions:

問題考えられる原因解決
ヒーターが作動しません。No power supply. Main switch off. Anti-tip switch activated.Check power cord connection. Ensure main switch is ON. Place heater on a flat surface to reset anti-tip switch.
熱出力はありません。Low heat setting selected. Heating element failure.Increase heat level using the remote or control panel. If still no heat, contact customer support.
リモコンが機能しない。Dead batteries. Obstruction between remote and heater.Replace remote control batteries. Ensure clear line of sight to the heater's receiver.
ヒーターが突然オフになります。Anti-tip switch activated. Overheating protection. Timer function.Ensure heater is upright and stable. Check for obstructions. Allow unit to cool down. Check if timer is set.

If the problem persists after attempting these solutions, please contact TRESKO customer support.

7. 仕様

Technical details for the TRESKO 2000W Infrared Standing Heater.

特徴詳細
ブランドトレスコ
モデル2000W Standing Infrared Heater (B0FPD9RF1Z)
熱出力2000ワット(最大)
熱レベル3(650W、1350W、2000W)
巻tage230ボルト(AC)
電源電気ケーブル
加熱方法Radiant (Carbon Tube)
寸法(製品)30cm(奥行き)×30cm(幅)×100cm(高さ)
アイテム重量7キログラム
保護等級IP34 (Waterproof and Corrosion-resistant)
タイマー機能1~24時間
暖房エリア最大25㎡
寿命最大6000時間
TRESKO Infrared Heater showing a heat distribution pattern and indicating a heating surface of 25 square meters and a lifespan of up to 6000 hours.

Image 6: Heating coverage area of 25m² and estimated lifespan of the heating element.

8. 保証とサポート

TRESKO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact your retailer.

カスタマーサポート:

If you have any questions, require technical assistance, or need to report a problem with your TRESKO Infrared Standing Heater, please contact the retailer from whom you purchased the product. They will be able to provide the most accurate and timely support.