Aigostar 100W RGB Solar LED Floodlight User Manual

1. はじめに

Thank you for choosing the Aigostar 100W RGB Solar LED Floodlight. This manual provides essential information for the safe and efficient use of your new solar floodlight. Please read these instructions carefully before installation and operation, and retain them for future reference.

2. 安全情報

安全な操作を確保し、損傷を防ぐために、次の安全上の注意事項を守ってください。

• Always handle the solar panel and floodlight with care.
• Do not attempt to disassemble or modify the product. This will void the warranty and may cause damage or injury.
• 製品を火気や極度の熱源から遠ざけてください。
• 最適な充電のために、ソーラーパネルが直射日光が当たる場所に設置されていることを確認してください。
• Avoid looking directly into the LED light source when it is active, as it may cause eye strain.
• 本製品は IP66 防水仕様で屋外での使用に適していますが、水に浸さないでください。
• 子供が機器で遊ばないように監督する必要があります。

3. パッケージ内容

パッケージにすべてのコンポーネントが含まれていることを確認します。

• Aigostar 100W RGB Solar LED Floodlight (4 units)
• ソーラーパネル（4台）
• リモコン（1台）
• Mounting Accessories (screws, anchors, brackets)
• Ground Stake (for solar panel, if applicable)

Image: Contents of the Aigostar 100W RGB Solar LED Floodlight package, showing the floodlight, solar panel, remote control, and various mounting accessories.

4.製品オーバーview

The Aigostar 100W RGB Solar LED Floodlight is designed for versatile outdoor and indoor illumination, featuring a powerful 100W LED, an 8000mAh high-capacity battery, and an efficient monocrystalline silicon solar panel. It offers RGB color options and is controlled via a remote.

主な特徴:

• 高効率ソーラーパネル： Monocrystalline silicon panel with up to 25% photoelectric conversion efficiency.
• 長いバッテリー寿命: 8000mAh battery provides up to 14 hours of continuous operation after 4-6 hours of charging.
• RGBW Multi-purpose LED: 16 static colors and 4 dynamic modes (Flash, Strobe, Fade, Smooth) for various ambiance settings.
• 耐久性と耐候性： IP66 rating, resistant to cold (-10°C) and heat (50°C), made from ABS and tempered glass.
• 自動モード: Built-in light sensor for automatic dusk-to-dawn operation.
• リモートコントロール: Convenient control of colors, modes, and brightness.
• 調整可能なブラケット: 180° rotatable steel tube holder for flexible positioning.

Image: The Aigostar Solar LED Floodlight highlighting its large solar panel, 8000mAh battery capacity, and efficient charging/working times.

Image: Illustration of the floodlight's IP66 waterproof rating and its ability to withstand extreme temperatures, from -10°C to 50°C, shown in sunny, snowy, and rainy environments.

Image: The floodlight in an outdoor setting, demonstrating its RGB capabilities with 15 static colors and 4 dynamic modes, suitable for creating festive atmospheres.

5. セットアップとインストール

The Aigostar solar floodlight is designed for easy installation on walls, ceilings, or floors. It comes with a 5-meter cable for flexible placement of the solar panel.

重要な考慮事項:

• ソーラーパネルの配置: Install the solar panel in an area that receives maximum direct sunlight throughout the day. Adjust its angle for optimal sun exposure.
• 初期費用： It is recommended to charge the solar panel for 24 hours before the first use to ensure the battery is fully charged.
• 設置高さ: For optimal light distribution, an installation height of 3-6 meters is recommended.

Installation Steps (Wall Mount):

1. Mark the desired drilling points on the wall for the floodlight bracket.
2. Drill holes and insert wall anchors. Secure the floodlight bracket using screws.
3. Attach the solar panel bracket to the wall in a location with good sunlight.
4. Connect the solar panel cable to the floodlight cable, ensuring a secure, waterproof connection.
5. Adjust the angle of both the floodlight and the solar panel as needed.

Installation Steps (Floor/Ground Mount):

1. Attach the ground stake to the solar panel bracket.
2. Insert the ground stake into soft ground in a location with good sunlight.
3. Position the floodlight on a stable surface or mount it using its bracket.
4. Connect the solar panel cable to the floodlight cable, ensuring a secure, waterproof connection.
5. Adjust the angle of both the floodlight and the solar panel as needed.

Image: Visual guide for installing the solar floodlight, illustrating both wall and ground mounting options for the solar panel and floodlight unit.

6. 操作手順

The Aigostar Solar LED Floodlight can be operated using the included remote control and features an automatic light sensor.

リモートコントロール機能:

Image: Layout of the remote control, detailing buttons for power, brightness adjustment, 16 static color selections (including White), and 4 dynamic lighting modes.

• オン/オフボタン: を押して、ライトをオンまたはオフにします。
• 明るさ/速度調整: 使用 + そして - buttons to increase/decrease brightness for static colors or adjust speed for dynamic modes.
• 静的色: Select from 16 predefined colors, including White (W), Red (R), Green (G), Blue (B), and various shades.
• ダイナミックモード:
  • 閃光： Rapid color changes.
  • ストロボ： Flashing of a single color.
  • フェード： Gradual transition between colors.
  • スムーズ： Smooth, continuous color cycling.

自動モード:

• The floodlight has a built-in light sensor that automatically turns the light on at dusk and off at dawn.
• To disable Automatic Mode: Press and hold the "OFF" button on the remote control for 3 seconds. The light will flash twice to confirm the mode is deactivated.
• To re-enable Automatic Mode: リモコンの「ON」ボタンを押します。

7. メンテナンス

Regular maintenance ensures the longevity and optimal performance of your solar floodlight.

• ソーラーパネルの清掃: Clean the solar panel regularly (at least once a year, or more frequently in dusty environments) with a soft, damp cloth. This prevents dust accumulation and maintains charging efficiency.
• 一般的な清掃: Wipe the floodlight housing with a soft, damp 必要に応じて布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• バッテリー： The integrated battery is designed for long-term use. Do not attempt to replace it yourself.
• 検査： Periodically check the cables and connections for any signs of wear or damage. Ensure all mounting hardware remains secure.

8。 トラブルシューティング

If you encounter issues with your Aigostar Solar LED Floodlight, try the following steps:

• ライトが点灯しない:
  • Ensure the solar panel is receiving sufficient direct sunlight for charging.
  • Verify that the cable connection between the solar panel and floodlight is secure.
  • Check if the automatic mode is active or if the light was manually turned off via the remote.
  • Allow for an initial 24-hour charge before first use.
• Light dim or short working time:
  • Clean the solar panel surface to remove any dust or debris that may be obstructing sunlight.
  • ソーラーパネルが太陽光に最大限さらされる位置に設置されていることを確認してください。
  • Cloudy weather or insufficient sunlight will reduce charging efficiency and working time.
• リモコンが機能しない:
  • リモコンと投光器の間に障害物がないことを確認してください。
  • リモコンの電池を確認し、必要に応じて交換してください。

If problems persist, please contact Aigostar customer support.

9. 仕様

Image: Detailed dimensions of the solar panel and floodlight, including the 5-meter connection cable.

10. 保証とサポート

Aigostar products are manufactured to high-quality standards. For warranty information, please refer to the specific terms provided at the point of purchase or visit the official Aigostar webサイト。

If you require technical assistance, have questions about your product, or need to report a defect, please contact Aigostar customer support through their official channels. Please have your model number (ZQ-JXRGB-100W) and purchase details ready when contacting support.

サポートの連絡先は、多くの場合、ブランドの公式ウェブサイトに掲載されています。 webサイトまたは製品を購入した小売店を通じて購入できます。