安全情報
Please read all instructions carefully before installing or operating this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- This 240V heater requires hardwired installation by a qualified electrician. It must be grounded and connected to a properly sized current protection circuit breaker that meets U.S. National Electrical Code and local codes.
- コードやプラグが損傷しているとき、またはヒーターが故障したとき、あるいは落下したり何らかの損傷を受けたときは、ヒーターを操作しないでください。
- 屋外では使用しないでください。このヒーターは屋内専用です。
- 家具、枕、寝具、紙、衣類、カーテンなどの可燃物はヒーターの前面から少なくとも 3 フィート (0.9 メートル) 離し、側面や背面からも離してください。
- 火災を防止するため、吸気口や排気口を塞がないでください。ベッドなど、開口部が塞がれる可能性がある柔らかい表面では使用しないでください。
- このヒーターには、内部に高温でアークまたは火花が出る部分があります。 ガソリン、塗料、または可燃性の蒸気や液体が使用または保管されている場所では使用しないでください。
- 使用しないときは必ずヒーターのプラグを抜いてください。
- The heater is equipped with an overheat protection feature that automatically cuts power if internal temperatures exceed safe limits.
セットアップとインストール
This section provides instructions for the proper installation of your Riseon Electric Garage Heater. Due to the hardwired nature of this appliance, professional installation by a qualified electrician is strongly recommended to ensure safety and compliance with electrical codes.
インストールのステップオーバーview
The installation process involves connecting the wiring, locating the heater, mounting the bracket, hanging the heater, and adjusting the louvers. Please refer to the detailed steps and visual aids below.
ビデオ： Riseon Electric Garage Heater Installation Guide. This video demonstrates the step-by-step process for installing the heater, including wiring, mounting, and final adjustments.
Step 1: Connecting the Wire
- Remove the bottom panel: Turn off the power at the circuit breaker. Remove all screws from the bottom panel to access the wiring compartment.
- Open a cutout: Choose a suitable side for wiring entry and open the designated cutout.
- ワイヤーを準備します: For 7500W and 10000W models, use the provided copper tips for better conductivity. For 5000W models, copper tips are excluded.
- ワイヤーを接続します: Connect the power wires to the power block as instructed in the wiring diagram. Ensure proper grounding. Note: Hard wire accessories are not included.
- 接続を締めます: Torque all terminal screws and power block lugs tightly with the required torque (40 in-lbs).
- Close the panel: Close the bottom panel and tighten the screws.
画像： Wiring diagram and connection points for the heater. This image illustrates the internal wiring connections and the importance of securing them properly.
画像： The heater unit with its remote control, showing the control panel. This image highlights the external controls and the remote for convenient operation.
Step 2: Locating the Heater
Choose a suitable location for mounting the heater. Ensure there is adequate clearance around the unit for safe operation and optimal heat distribution.
- Maintain a minimum distance of 8 inches from the side of the heater to any adjacent walls or obstructions.
- Maintain a minimum distance of 13 inches from the front of the heater to any adjacent walls or obstructions.
ステップ 3: ブラケットの取り付け
- 下穴をあける: Drill two pilot holes in the ceiling at the desired mounting location, ensuring they align with the bracket holes.
- Place washers: Place a washer on each screw.
- Secure bracket: Screw the bracket securely into the ceiling using appropriate fasteners for your ceiling type.
Step 4: Hanging the Heater
- Align lower bracket holes: Align the lower bracket holes of the heater with the corresponding holes on the mounted ceiling bracket.
- Align upper bracket holes: Align the upper bracket holes of the heater with the corresponding holes on the mounted ceiling bracket.
- Use keyhole slots: Utilize the keyhole slots for adjusting the heater's angle.
Step 5: Adjusting Louvers
Adjust the louvers to direct the airflow to your desired area. This allows for precise heat distribution within your space.
画像： Close-up of the heater's adjustable louvers, demonstrating how they can be angled to direct heat. This feature allows for customized heating zones.
手術
Your Riseon Electric Garage Heater offers multiple control options for convenience and efficiency.
コントロールオプション
- LEDタッチスクリーン: Directly control settings on the unit's integrated LED touch screen.
- リモートコントロール: Use the included remote control for convenient adjustments from a distance.
- Tuya APP (WIFI models only): For models with WIFI, download the Tuya APP to control the heater remotely from your smartphone.
画像： A smartphone displaying the Tuya app interface, controlling the heater. This image demonstrates the remote control capability via the app.
ビデオ： Riseon Garage Heater with APP Control. This video illustrates how to connect the heater to the Tuya app and control its various functions, including power, heating levels, timer, and ECO mode settings.
主な特徴
- 電源設定: Choose from three power settings: 7500W (High), 6250W (Low), and Fan Only mode.
- エコモード： The precision temperature sensor automatically adjusts operation for optimal energy efficiency. Activate ECO mode via the control panel, remote, or app.
- プログラム可能なタイマー: Set a timer for 1-12 hours to schedule heating sessions and manage energy consumption.
- サーモスタット： Adjust the desired temperature using the built-in thermostat. The heater will maintain the set temperature.
- 過熱保護: For safety, the system automatically cuts power if it detects overheating risks.
- 温度単位変換： Switch between Fahrenheit (°F) and Celsius (°C) as preferred.
画像： A graph illustrating the power consumption in ECO mode compared to standard operation. This visual demonstrates how ECO mode optimizes energy usage by cycling power.
メンテナンス
Regular maintenance ensures the longevity and efficient operation of your Riseon Electric Garage Heater. Always disconnect the power before performing any maintenance.
- クリーニング： 定期的にヒーターの外側を柔らかくて乾いた布で掃除してください。amp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is completely dry before reconnecting power.
- ほこりの除去: Use a vacuum cleaner with a brush attachment to remove dust and debris from the air intake and exhaust grilles. This helps maintain optimal airflow and heating efficiency.
- 検査： Regularly inspect the power connections and wiring for any signs of wear, damage, or loose connections. If any issues are found, contact a qualified electrician for repair.
- ストレージ： ヒーターを長期間保管する場合は、清潔で乾燥した状態を保ってください。直射日光や湿気を避け、涼しく乾燥した場所に保管してください。
トラブルシューティング
If you experience issues with your Riseon Electric Garage Heater, refer to the following common troubleshooting steps. If the problem persists, contact customer support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ヒーターが作動しません。 | No power supply, circuit breaker tripped, or power switch off. | Check the circuit breaker and ensure it is not tripped. Verify the heater's power switch is in the ON position. Confirm proper hardwired connection. |
| ヒーターが突然停止します。 | Overheat protection activated, or timer function engaged. | Allow the heater to cool down. Check for obstructions around the heater. Verify if the timer function is set to turn off the unit. |
| 暖房が不十分です。 | Incorrect power setting, louvers misdirected, or room size too large. | Ensure the heater is set to a higher power mode (e.g., 7500W). Adjust louvers to direct heat effectively. Confirm the heater's capacity matches the room size (up to 1250 sq ft). |
| リモコンが機能しない。 | Dead batteries, or remote not pointed correctly. | Replace the batteries in the remote control. Ensure the remote is pointed directly at the heater's receiver. |
| WIFI/App connection issues. | Incorrect WIFI password, poor signal, or app not properly configured. | Verify your WIFI password. Ensure the heater is within range of your WIFI router. Follow the Tuya app's pairing instructions carefully. |
仕様
Detailed technical specifications for the Riseon 7500W Electric Garage Heater (Model CZ230ERW).
| 特徴 | 詳細 |
|---|---|
| ブランド | リセオン |
| モデル番号 | CZ230ERW |
| 出力 | 7500W / 6250W (3 power settings including fan only) |
| 巻tage | 240V / 60Hz |
| 熱出力 (BTU) | 25,590BTU |
| 暖房範囲 | 最大1250平方フィート |
| 燃料の種類 | 電気 |
| 特集 | Adjustable Temperature, WIFI & Remote Control, ECO Mode, 12H Timer, Thermostat, Overheat Protection, Adjustable Louvers |
| 色 | 黒 |
| フォームファクター | Square, Ceiling Mount |
| 屋内/屋外での使用 | 屋内 |
| 最高温度設定 | 華氏95度 |
| 製品寸法 | 14.4 x 10.6 x 18.6インチ |
| アイテム重量 | 26.5ポンド |
| 認定資格 | ETL認定 |
| 推奨されるサーキットブレーカ | 40A |
| 推奨ワイヤサイズ | #8 AWG Wire, 75°F Copper |
| 推奨ラグトルク | 40インチポンド |
保証とサポート
For warranty information, technical support, or service inquiries, please contact Riseon customer service. Keep your purchase receipt and model number handy for faster assistance.
Optional protection plans are available for purchase, offering extended coverage beyond the standard manufacturer's warranty. These plans typically cover repairs or replacements for a specified duration.
- 3年間の保護プラン: 購入可能です。
- 4年間の保護プラン: 購入可能です。
- 完全保護: 対象となる過去および将来の購入を対象とする月額サブスクリプション プラン。
For specific terms and conditions of these protection plans, please refer to the plan provider's documentation.