tectake B0FLK3LM86

tectake i-Size Car Seat Instruction Manual

Model: B0FLK3LM86

導入

This manual provides essential information for the correct installation, operation, and maintenance of your tectake i-Size Car Seat. Please read these instructions carefully before using the product to ensure the safety and comfort of your child. This car seat is designed for children from 40 cm to 150 cm in height, with a maximum weight of 36 kg, and complies with ECE R129 i-Size safety standards.

安全情報

お子様の安全は何よりも大切です。以下の安全ガイドラインを必ずお守りください。

  • i-Size Certification (ECE R129): This car seat meets the latest European safety standards, providing enhanced protection, especially against side impacts.
  • ISOFIX and Top Tether: Always use the ISOFIX connectors and the Top Tether strap for a secure and stable installation in your vehicle. Ensure both are correctly engaged.
  • 5点式安全ハーネス: For children within the appropriate height range, always secure your child using the integrated 5-point harness. Ensure it is snug and correctly adjusted.
  • 車両互換性: Only install this car seat in vehicles equipped with ISOFIX anchor points and a Top Tether attachment point. Consult your vehicle's owner manual.
  • Child Height and Weight Limits: This seat is suitable for children from 40 cm to 150 cm in height and up to 36 kg. Do not use the 5-point harness beyond the specified height/weight limits (refer to operating instructions for transition to vehicle seat belt).
  • お子様を放置しないでください: Do not leave your child unattended in the car seat, even for short periods.
  • 衝撃保護: The car seat features advanced side impact protection. Ensure the seat is correctly positioned to maximize this feature.
  • 事故後: If the car seat has been involved in an accident, even a minor one, it must be replaced immediately as its structural integrity may be compromised.

製品の特徴

The tectake i-Size Car Seat offers a range of features designed for safety, comfort, and convenience:

  • i-Size認定: Conforms to ECE R129 standards with integrated side impact protection.
  • ISOFIX and Top Tether: Provides a secure and stable connection to the vehicle chassis.
  • 360°回転: Allows easy access for placing and removing your child, and switching between forward and rear-facing positions (where applicable for child's height/age).
  • 調節可能なリクライニング: Two adjustable recline angles for optimal comfort during travel.
  • 高さ調節可能なヘッドレスト: Adapts to your child's growth from 40 cm to 150 cm.
  • 5点式安全ハーネス: Secure and adjustable harness for younger children.
  • Thick Padding: Ensures high levels of comfort for long journeys.
  • 取り外して洗えるカバー: お手入れが簡単で衛生を保ちます。
以上view of tectake i-Size Car Seat features with a child dummy secured inside.

画像: 上view of the tectake i-Size Car Seat highlighting key features such as i-Size certification, 360° rotation, 5-point harness, adjustable headrest, and washable cover. A child dummy is shown secured in the seat.

Two tectake i-Size Car Seats, one larger and one smaller, demonstrating how the seat grows with the child.

Image: Two tectake i-Size Car Seats, one configured for a younger child and one for an older child, illustrating the seat's adaptability as the child grows up to 36 kg.

セットアップとインストール

Follow these steps for secure installation of your tectake i-Size Car Seat:

  1. 車両を準備する: Ensure your vehicle has ISOFIX anchor points and a Top Tether attachment point. Locate these points in your car.
  2. Extend ISOFIX Connectors: Press the release buttons on the car seat to extend the ISOFIX connectors.
  3. Attach ISOFIX: Align the ISOFIX connectors with the vehicle's ISOFIX anchor points. Push firmly until you hear an audible "click" and the indicators turn green (if present). Pull on the seat to ensure it is securely attached.
  4. Connect Top Tether: Route the Top Tether strap over the back of the vehicle seat and attach the hook to the designated Top Tether anchor point in your vehicle. Pull the strap to tighten it, removing any slack, until the indicator turns green (if present).
  5. 安定性をチェック: Once installed, firmly push and pull the car seat to ensure it is stable and does not move excessively.
  6. Adjust for Child: For younger children (40-105 cm), ensure the seat is in the rear-facing position (if applicable for your model's rotation feature) and use the 5-point harness. For older children (100-150 cm), the 5-point harness may be removed, and the child secured with the vehicle's 3-point seat belt. Adjust the headrest to the correct height.
詳細 view of ISOFIX connectors and Top Tether installation points.

Image: Close-up showing the reliable ISOFIX system ensuring secure anchoring and the robust Top Tether reducing forward movement in case of impact.

Images showing ISOFIX connection, Top Tether attachment, and 5-point harness use.

Image: Visual guide demonstrating the ISOFIX connection, the Top Tether attachment point behind the vehicle seat, and the proper use of the 5-point harness.

操作手順

Securing Your Child with the 5-Point Harness (40-105 cm)

  1. 子供の配置: Open the harness buckle and place your child in the car seat.
  2. ハーネスを締める: Bring the two buckle tongues together and insert them into the buckle until you hear a "click".
  3. ハーネスを締める: Pull the adjustment strap at the front of the seat to tighten the harness until it is snug against your child's body. Ensure you can only fit one finger between the harness and your child's collarbone.
  4. Loosen Harness: Press the harness release button (usually located near the adjustment strap) and pull the shoulder straps outwards to loosen.

ヘッドレストの調整

The headrest can be adjusted to multiple positions to accommodate your child's height. Locate the headrest adjustment lever (usually at the top or back of the headrest). Squeeze the lever and slide the headrest up or down until it is at the correct height, ensuring the shoulder straps are at or just below your child's shoulders when rear-facing, or at or just above when forward-facing.

Image showing the adjustable headrest mechanism of the car seat.

Image: The adjustable headrest, designed to adapt for children from 40 cm to 150 cm, shown with an arrow indicating upward adjustment.

360°回転機能の使用

To rotate the car seat, locate the rotation release lever (typically at the front base of the seat). Press or pull the lever and rotate the seat to the desired position (e.g., facing the car door for easy access, or switching between rear-facing and forward-facing). Ensure the seat locks securely into place after rotation.

Images demonstrating the 360-degree rotation and recline functions of the car seat.

Image: Visual representation of the smooth 360° swivel mechanism and adjustable recline positions of the car seat.

Adjusting Recline Angles

The car seat offers two recline angles for your child's comfort. Locate the recline adjustment handle (usually at the front or side of the base). Pull the handle and tilt the seat to the desired recline position. Release the handle to lock the seat in place.

メンテナンス

Regular maintenance ensures the longevity and hygiene of your car seat:

  • カバーのクリーニング: The polyester cover is completely removable and washable. Follow the washing instructions on the care label (typically cold water, gentle cycle, air dry). Do not tumble dry or iron.
  • シェルのクリーニング: Wipe the plastic parts of the car seat shell with a damp 布と中性洗剤を使用してください。研磨剤入りの洗剤や溶剤は使用しないでください。
  • ハーネスのお手入れ: ハーネスストラップの摩耗や損傷を定期的に点検してください。amp cloth and mild soap. Do not machine wash the harness straps as this can weaken them.
  • ストレージ: 使用していないときは、直射日光や極端な温度を避け、清潔で乾燥した場所にチャイルドシートを保管してください。

トラブルシューティング

If you encounter issues with your tectake i-Size Car Seat, consider the following:

  • Seat Feels Loose After Installation:
    • Ensure ISOFIX connectors are fully engaged and indicators are green.
    • Tighten the Top Tether strap securely.
    • Push the car seat firmly into the vehicle seat back.
  • ハーネスの締め付け/緩めが困難:
    • Check for any twists in the harness straps.
    • Ensure no fabric is obstructing the adjustment mechanism.
    • Clean the harness buckle if it feels sticky.
  • Seat Does Not Rotate Smoothly:
    • Ensure the rotation release lever is fully engaged.
    • Check for any obstructions under the seat base.

If problems persist, please contact tectake customer support.

仕様

製品仕様
特徴詳細
ブランドテクタケ
インストールタイプISOFIX
材料HDPE, 100% Polyester
オリエンテーション360°回転
製品寸法(長さ x 幅 x 高さ)55P x 48l x 74H cm(約55 x 48 x 74 cm)
アイテム重量11.1キロ
推奨最大重量36キロ
子供の身長範囲40cm~150cm
認証ECE R129 (i-Size)
Diagram showing the dimensions and technical data of the tectake i-Size Car Seat.

Image: Detailed product information including total measurements (48 x 55 x 66 - 74 cm), seat surface (25 x 29 cm), backrest height (46 cm), and technical data such as child height range (40-150 cm), maximum weight (36 kg), and materials (HDPE, steel, 100% polyester). All measurements are approximate.

保証とサポート

For warranty information, product support, or to report any issues, please refer to the warranty card included with your purchase or visit the official tectake webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

連絡先: Please refer to the contact details provided in the packaging or on the official tectake webカスタマーサービスのサイト。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.