GREEN DEVIL Replacement Polycarbonate Face Shield Matrix FB Series Instruction Manual

1.製品オーバーview

The GREEN DEVIL Replacement Polycarbonate Face Shield is designed to provide comprehensive facial protection when used with compatible Matrix FB Series Hard Hats. This visor and bracket combination offers clear vision and resistance against high impact and chemical splashes, ensuring safety in various industrial and scientific applications.

Image 1.1: The GREEN DEVIL Replacement Polycarbonate Face Shield, designed for use with Matrix FB Series Hard Hats.

主な特徴:

• Integrated adapter compatible with Matrix FB Series Hard Hats.
• Clear polycarbonate visor for crisp, unobstructed vision.
• Resistant to high impact and chemical splashes.
• Provides full 180-degree face protection.
• Meets ANSI Z87.1+ (US) and CE EN1731 (Europe) standards.

2. 安全情報

Always prioritize safety when using personal protective equipment. This face shield is intended to be used in conjunction with a compatible hard hat to form a comprehensive above-the-neck safety system.

2.1 重要な注意事項

• 保護フィルムを剥がします: The clear polycarbonate visor arrives with a thin plastic film on both sides. Remove this film from both sides before use to ensure clear vision.
• 互換性: This face shield is specifically designed for use with GREEN DEVIL Matrix FB Series Hard Hats. Ensure compatibility before attachment.
• 検査： Before each use, inspect the face shield for any signs of damage, cracks, or excessive wear. Replace immediately if damaged.
• クリーニング： Clean the visor regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the polycarbonate material.
• ストレージ： Store the face shield in a clean, dry place away from direct sunlight and extreme temperatures to prolong its lifespan.

Image 2.1: Illustration showing the removal of the protective film from both sides of the face shield before use.

3. 箱の中身

パッケージには次のアイテムが含まれています。

• 1 x GREEN DEVIL Replacement Polycarbonate Face Shield with integrated bracket.

Note: Hard hat and earmuffs are not included and must be purchased separately.

4. セットアップとインストール

This face shield is designed for easy attachment to GREEN DEVIL Matrix FB Series Hard Hats. Follow these steps for proper installation:

1. Prepare the Hard Hat: Ensure your Matrix FB Series Hard Hat is clean and free of debris. Locate the fitting slots on the sides of the hard hat.
2. Align the Face Shield: Take the face shield and align the panel insert vertically with the fitting slot on one side of the hard hat.
3. 挿入して固定します: Gently push the panel insert into the slot until it clicks securely into place. Repeat this process for the other side, ensuring both sides are fully engaged.
4. インストールの確認: Once both sides are installed, check that the face shield is firmly attached and does not wobble. The special buckle design ensures a secure fit without needing additional accessories.
5. Adjust Visor Position: The visor can be raised and lowered. Turn the black knobs on the sides of the bracket to lock the visor into your desired position. Ensure it can be raised and lowered freely when unlocked, and securely held when locked.

Image 4.1: Visual guide demonstrating the alignment, insertion, and locking mechanism for attaching the face shield to a hard hat.

For a smooth setup, it is recommended to review 組み立て手順は慎重に行ってください。

5. 操作手順

Once installed, the GREEN DEVIL Face Shield is ready for use. Its design allows for easy adjustment during operation.

• Lowering the Visor: To protect your face, simply flip the visor down. Ensure it covers your entire face for full 180-degree protection.
• Raising the Visor: When not actively requiring face protection, the visor can be flipped up and secured in an elevated position. This allows for clear, unobstructed vision without removing the hard hat.
• ロック機構: The black knobs on the side brackets allow you to adjust the tension and lock the visor in a specific position (up or down). Turn the knobs to tighten or loosen the mechanism as needed.

Image 5.1: The face shield demonstrating its ability to be raised and lowered for operational flexibility.

6. メンテナンス

Proper maintenance will extend the life of your GREEN DEVIL Face Shield and ensure continued protection.

• クリーニング： Clean the polycarbonate visor with a soft cloth, mild soap, and lukewarm water. Rinse thoroughly and air dry or gently wipe with a clean, soft cloth. Do not use abrasive materials, paper towels, or chemical cleaners (e.g., ammonia-based window cleaners) as these can scratch or damage the visor.
• 検査： Regularly inspect the visor and bracket for scratches, cracks, discoloration, or any signs of degradation. Heavy scratches can impair vision and reduce impact resistance.
• 交換： Replace the face shield immediately if it shows signs of damage, significant wear, or if its clarity is compromised.
• ストレージ： Store the face shield in a protective environment, ideally in its original packaging or a dedicated storage area, to prevent scratches and exposure to harsh conditions.

7。 トラブルシューティング

If you encounter any issues with your GREEN DEVIL Face Shield, consider the following:

• Visor is not clear: Ensure the protective film has been removed from both sides of the visor (refer to Section 2.1).
• Face shield feels loose on hard hat: Verify that both panel inserts are fully engaged in the hard hat slots. Check for any damage to the bracket or hard hat slots.
• Visor does not stay in position: Tighten the black locking knobs on both sides of the bracket. If the issue persists, inspect the locking mechanism for wear or damage.

For persistent issues or concerns not addressed here, please contact GREEN DEVIL customer support.

8. 仕様

9.サポートと保証

GREEN DEVIL is committed to providing quality products and customer satisfaction. If you have any questions, concerns, or require assistance with your Replacement Polycarbonate Face Shield, please do not hesitate to contact us.

連絡先：

• Please refer to the contact details provided with your purchase or visit the official GREEN DEVIL webサポートサイト。

For warranty information, please consult the documentation included with your product or contact GREEN DEVIL customer service directly. We are dedicated to making things right, fast!