1.製品オーバーview
The DDPAI OBD Hardwire Kit (Model DC003) provides a reliable power solution for your DDPAI dash camera, enabling 24-hour parking monitoring without draining your vehicle's battery. It features easy plug-and-play installation via the car's OBD port and incorporates multiple safety protections to ensure both your dash cam and vehicle are protected.
2. 互換性
2.1. Compatible Dash Cam Models
- ミニ2X
- N2
- Z50プロ
- Z60
- Z60 3 Channels
- Z60プロ
- 3チャンネル
2.2. Incompatible Vehicle Models
The DDPAI OBD Hardwire Kit is not suitable for the following vehicle models: Tesla, Porsche Cayenne, Mercedes 2018 W206, BMW 330i, Kia Carnival. Mercedes E220 may experience instrument abnormalities. All other car brands are compatible.
3. 仕様
| モデル | DC003 |
| Dash Cam Compatibility | MINI2X, N2, Z50pro, Z60, Z60 3 Channels, Z60pro, 3 Channels |
| 入力 | 12V 2A |
| 出力 | 5V 3A |
| ケーブル長さ | 3メートル |
| コネクタタイプ | OBD |
| 特集 | 5-fold protection |
| 最大電流 | 3 Ampエルス |
| マックスVoltage | 12ボルト |
| ピンの数 | 16 |
4. 主な特徴
- 簡単なインストール: Connects directly to the car's OBD port, eliminating the need for cigarette lighter or fuse box connections. This offers a clean and straightforward setup.
- 24時間駐車監視: The DDPAI OBD Hardwire Kit can provide continuous power to the dash cam even when the car is off, allowing for 24-hour parking surveillance and protection.
- 5重の保護： The hardwire kit is equipped with comprehensive safety features:
- 低ボリュームtag保護: 入力ボリュームがtage drops below 11.8V (±0.2V), the smart kit will automatically cut off power after 60 seconds to prevent vehicle battery drain.
- 過電流保護： 過剰な電流の流れを防止します。
- 短絡保護: ショートによる損傷を防ぎます。
- 過負荷保護: Protects against power overloads.
- 逆接続保護: Ensures correct polarity connection.
5.インストールガイド
5.1. ステップバイステップのインストール
- インストールの準備： Ensure your vehicle is turned off. Identify your car's OBD port, typically located under the dashboard on the driver's side.
- ハードワイヤーキットを接続します。 Plug the DDPAI OBD Hardwire Kit directly into your vehicle's OBD port. No additional wiring to the cigarette lighter or fuse box is required.
- ケーブルを配線する: Carefully route the 3-meter cable from the OBD port to your dash cam's mounting location. Use the included cable clips or tuck the cable along the vehicle's interior trim for a neat installation.
- ダッシュカムに接続: Connect the other end of the hardwire kit cable to your compatible DDPAI dash cam.
- 接続をテストします: Start your vehicle to ensure the dash cam powers on correctly. Verify that the parking monitoring function activates when the vehicle is turned off.
5.2. Installation Video (DDPAI N5 Dual)
Video: This video demonstrates the installation process for a DDPAI N5 Dual dash cam, which includes routing cables and connecting the power source. While it features a specific dash cam, the cable routing and connection principles are similar for the OBD Hardwire Kit.
6. 操作手順
6.1. Automatic Parking Monitoring
Once installed, the hardwire kit automatically provides power to your dash cam for 24-hour parking monitoring. When your vehicle is turned off, the kit detects the change in voltage and keeps the dash cam powered for continuous surveillance, recording any incidents.
6.2.低ボリュームtag保護
The intelligent kit is designed to protect your vehicle's battery. If the input voltage drops below 11.8V (±0.2V), the kit will automatically cut off power to the dash cam after 60 seconds to prevent excessive battery drain, ensuring your car can start.
7。 トラブルシューティング
7.1. ダッシュカムの電源が入らない
- Check if the OBD connector is securely plugged into the vehicle's OBD port.
- Ensure the hardwire kit cable is properly connected to the dash cam.
- Verify that your vehicle's ignition is on (for initial setup) or that the parking monitoring mode is active when the vehicle is off.
7.2. Parking Monitoring Not Working
- Confirm that your dash cam model supports 24-hour parking monitoring and is configured correctly in its settings.
- 車のバッテリー容量を確認するtage. If it's too low, the low voltage protection feature might have activated, cutting power to the dash cam.
7.3. Dash Cam Overheating
- The hardwire kit includes overheating protection. If the dash cam or kit feels excessively hot, disconnect it and allow it to cool down. Ensure proper ventilation around the dash cam.
7.4. Incompatible Vehicle Message
- Refer to the "Incompatible Vehicle Models" list in the Compatibility section. If your vehicle is listed, the hardwire kit is not designed for it.
8. 保証とサポート
For warranty information, technical support, or further assistance, please refer to the official DDPAI website or contact DDPAI customer service. Keep your purchase receipt as proof of purchase.
9. Unboxing Videos (Related Dash Cams)
9.1. DDPAI Z50 Pro Unboxing
Video: This video provides an unboxing experience for the DDPAI Z50 Pro dash cam, showcasing its components and initial setup. It can be helpful for understanding the dash cam components that connect to the hardwire kit.
9.2. DDPAI Z60 Unboxing
Video: This video offers an unboxing view of the DDPAI Z60 dash cam, detailing what's included in the package. It can be helpful for understanding the dash cam components that connect to the hardwire kit.