UDIRC 1:16スケール 高速全地形対応RCトラック 取扱説明書

1. はじめに

This manual provides essential information for the safe and efficient operation of your UDIRC 1:16 Scale Fast All-Terrain RC Truck. Please read through these instructions carefully before first use and retain for future reference.

2. 安全情報

警告： Not suitable for children under 36 months due to small parts. Adult supervision is recommended during operation. Always ensure the battery is handled with care to prevent fire hazards. Disconnect the battery when not in use or when charging. Do not charge unattended.

3. 箱の中身

• 1 x Truck
• 1 x 2.4GHz 4CH Transmitter (Remote Control)
• 2 x 2S 1200 mAh Rechargeable Batteries
• USB充電ケーブル x 1
• ドライバー x 1
• 1 x Extra Arms and Universal Drive Shaft
• 1 x Body Stickers
• 1 x DIY Light Kit
• 2 x Front Universal Drive Shaft
• 1 x Extra Body Shell Anti-Loss Clip
• 8 x Extra Zip Ties
• 1 x 1.5mm L-Shaped Hex Wrench
• 1 x 2.0mm L-Shaped Hex Wrench
• クロスレンチ×1
• 取扱説明書

4. セットアップ

4.1.バッテリーの充電

The truck comes with two 7.4V 1200mAh Li-ion batteries. Use the provided USB charging cable to charge them. Ensure batteries are fully charged before first use for optimal performance.

4.2. リモコン電池の取り付け

The remote control requires 4 AA batteries (not included). Alternatively, a 2-cell LiPo battery can be used in the remote control's battery compartment. Open the battery compartment cover on the underside of the remote control, insert the batteries, and close the cover.

4.3. Installing the Truck Battery

To install the truck battery, first remove the truck body. Secure the charged battery in the battery tray using the hook-and-loop strap. Connect the battery to the truck's power connector. The battery tray features padding on both sides and bottom for protection. This padding can be removed to accommodate larger batteries if desired.

4.4. Body Installation and Removal

The truck features a clipless body system for easy access. To remove the body, press the latch at the rear of the truck, then lift the body off. To install, align the front of the body, then push the rear down until it clicks into place. The body is reinforced for durability.

4.5. ライトキットの取り付け

A DIY light kit is included. The lights can be clipped into designated slots on the front bumper and rear of the truck. Refer to the detailed instructions in the included manual for specific wiring and installation steps.

5. 操作手順

5.1. 電源のオンとオフ

To power on the truck, press and hold the power button located on the chassis (under the body). To power off, press and hold the same button. The remote control has a separate on/off switch.

5.2. 速度モード

The remote control features multiple speed modes (e.g., 3-speed modes) to suit different skill levels. A beginner-friendly speed limit mode ensures safe control while learning. Adjust the speed mode using the switch on the remote control.

5.3. Handling and Control

Experience responsive driving with full proportional control, a 3-wire precision steering servo, 4-wheel independent suspension, and adjustable oil-filled shocks. The remote control allows for precise steering trim adjustment. The truck is designed for smooth, stable, and fun operation.

5.4. All-Terrain Playability

The truck is ready-to-run and designed for exciting playability on all terrains. It can conquer low grass, dirt, or gravel with ease. The heavy-duty 4WD system ensures excellent traction and control.

6. メンテナンス

6.1. 清掃

After use, especially on dirty or wet terrains, it is recommended to remove the body and clean out any debris (leaves, twigs, dirt) from the internal components. The fully-sealed driveshaft is designed for 99% dust blocking and low maintenance, protecting the transmission from overheating and wear.

6.2. Upgradable Platform

The truck is built on an upgradable platform. You can reach higher speeds with brushless upgrade kits (sold separately), offering options for 31 MPH or 56 MPH. This is an excellent way to learn RC customization and maintenance.

6.3. Genuine Parts Availability

All genuine parts are available for purchase, ensuring compatibility and efficiency for repairs and upgrades. Step-by-step video and PDF guides are available for installation and maintenance.

7。 トラブルシューティング

7.1. Difficulty Accessing Power Button

Some users may find the power button a little tight to access. It is located on the chassis under the body. You can often reach it by inserting your finger under the fender well and pushing the button, rather than removing the entire body every time.

7.2. 一般的な問題

If you encounter any operational issues, ensure all batteries are fully charged and correctly installed in both the truck and the remote control. Check all connections for security. For persistent problems, refer to the detailed troubleshooting section in the full instruction manual or contact customer support.

8. 仕様

• 製品寸法: 11.5 x 8.84 x 5.24インチ
• 商品の重量: 3.8ポンド
• メーカー推奨年齢: 14 - 20歳
• 電池: 非標準バッテリー2個必要（付属）
• ブランド： UDIRC
• モデル： 1:16 RC Truck
• Top Speed (Out of Box): 時速22マイル
• Upgradable Speed: Up to 56 MPH with brushless kits (sold separately)
• 駆動システム: Heavy-Duty 4WD
• コンポーネント: Metal differential, drive shaft gears, metal main shaft, 11 ball bearings, 117 hex screws, adjustable oil-filled shocks.

9. 保証とサポート

Newbie Protection Program | 1-Year Zero-Hassle Warranty: The product includes a 365-day worry-free warranty. Enjoy free technical support and parts replacement within the first year for Amazon customers. This program is designed to help you learn confidently and level up your RC skills with full support.

連絡先： For support, please refer to the contact details provided in the included operational guide or visit the UDIRC store on Amazon.