1. はじめに
This manual provides essential information for the proper use and care of your PITAKA Ultra-Slim Aramid Fiber Case, designed specifically for the iPhone 17 Pro (6.3-inch model). Crafted from aerospace-grade aramid fiber, this case offers a lightweight, durable, and scratch-resistant solution while maintaining a minimalist profile and enhancing functionality with integrated features.
2. 互換性
This PITAKA case is exclusively designed for the iPhone 17 Pro(6.3インチ). It is not compatible with other iPhone models, including the iPhone 17 Air/17 or iPhone 17 Pro Max.

Figure 2.1: Visual representation of case compatibility, highlighting the iPhone 17 Pro (6.3") as the only compatible device.
3. Setup: Installing Your PITAKA Case
Follow these steps to correctly install your PITAKA case on your iPhone 17 Pro:
- デバイスを準備する: iPhone 17 Pro が清潔で、ほこりやごみがないことを確認してください。
- Align the Top: Gently slide the top edge of your iPhone into the case, aligning the camera module with the case's camera cutout.
- 下部を固定する: Press the bottom corners of your iPhone firmly into the case until it snaps securely into place. Ensure all edges are flush with the case.

Figure 3.1: Proper installation of the PITAKA case onto the iPhone 17 Pro.
Video 3.1: An official PITAKA video demonstrating the unboxing and installation process of the iPhone 17 Pro case.
4. 操作機能
4.1. Camera Control Button (PitaTap)
The case features a responsive, built-in camera control button, referred to as PitaTap. This button allows for quick and effortless photo capture, perfectly aligned with your iPhone 17 Pro’s controls. It provides solid, responsive clicks without wobble, enhancing your photography experience.

Figure 4.1: Close-up of the integrated PitaTap camera control button.
Video 4.1: An official PITAKA video demonstrating the functionality of the PitaTap camera control button.
4.2. MagSafe Optimization
The case is fully compatible with MagSafe chargers, mounts, and accessories. Utilizing MagSafe SlimBoard technology, it ensures full-speed wireless charging, similar to using your iPhone without a case. The integrated magnets provide a secure attachment for MagSafe accessories.

Figure 4.2: The MagSafe compatible design of the case, showing strong magnetic strength.
Compatible accessories include:
- MagSafe wireless chargers
- MagSafe car mounts (e.g., PITAKA MagEZ Car Mount Pro)
- MagSafe wallets and ring holders
4.3. Caseless Touch Feeling
Constructed from 1500D aramid fiber, the case is ultra-slim (approximately 1mm thin) and featherlight (1.06 ounces), preserving the iPhone's original sleek profile. The woven aramid fiber provides a unique, tactile texture that enhances grip and comfort, offering a 'caseless' feel while providing protection against daily wear.

Figure 4.3: The case's minimal thickness and weight, designed for a caseless feel.
5. お手入れとメンテナンス
To ensure the longevity and appearance of your PITAKA case, follow these maintenance guidelines:
- クリーニング: ケースは定期的に柔らかくて乾いた布で拭いてください。amp cloth to remove dust and fingerprints. For stubborn stains, use a mild soap solution and rinse thoroughly.
- 刺激の強い化学物質を避ける: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the aramid fiber and its coating.
- 適切な取り扱い: While the case is durable, avoid excessive bending or twisting, which could compromise its structural integrity.
- ストレージ: 使用しないときは、ケースを直射日光を避けて涼しく乾燥した場所に保管してください。
6。 トラブルシューティング
If you encounter any issues with your PITAKA case, refer to the following common troubleshooting tips:
- Case Not Fitting Correctly: Ensure you have the correct model (iPhone 17 Pro 6.3-inch). Remove the case and re-install, ensuring proper alignment of all buttons and cutouts.
- MagSafeアクセサリがしっかりと取り付けられない: Check that both the case and the MagSafe accessory are clean and free of obstructions. Verify the accessory is MagSafe compatible.
- Camera Control Button Not Responding: Ensure your iPhone is fully seated within the case and that no debris is obstructing the button mechanism. Restart your iPhone if the issue persists.
7. 製品仕様
| 特徴 | 詳細 |
|---|---|
| 材料 | Aramid Fiber (1500D) |
| 互換性のある電話モデル | iPhone 17 Pro(6.3インチ) |
| アイテム重量 | 1.06オンス |
| パッケージ寸法 | 7.8 x 4.57 x 1.06インチ |
| 商品型番 | I17CM0US-ABGIADAA |
| 特集 | Anti-Slip, Camera Control (PitaTap), Lightweight, Slim Fit, Wireless Charging Compatible (MagSafe) |
8. 保証とサポート
For detailed warranty information and customer support, please visit the official PITAKA website or contact their customer service directly. PITAKA is committed to providing high-quality products and assistance.
Official PITAKA Store: Visit the PITAKA Store on Amazon