Aninerel 11000W 48V Hybrid Solar Inverter User Manual

1. はじめに

This manual provides essential information for the safe and efficient operation of your Aninerel 11000W 48V Hybrid Solar Inverter. This device is designed to convert 48V DC power from solar panels or batteries into 220V/230V AC power, suitable for various household and office applications. It features a built-in 160A MPPT solar controller and supports grid-tie functionality, allowing power to be fed into the mains. Please read this manual thoroughly before installation and use.

図1: Aninerel 11000W 48V Hybrid Solar Inverter with WiFi module.

2. 安全に関する注意事項

Always observe the following safety precautions to reduce the risk of injury or damage to the inverter:

• 設置は資格を持った人が行う必要があります。
• すべての配線のサイズが適切であり、正しく接続されていることを確認します。
• インバータを分解しないでください。内部にはユーザーが修理できる部品はありません。
• インバーターは可燃性物質、湿気、直射日光から遠ざけてください。
• 過熱を防ぐために、インバータの周囲に十分な換気を確保してください。
• Always disconnect all power sources (PV, battery, AC grid) before performing any maintenance or wiring.

3.製品オーバーview

3.1 主な特徴

• ハイパワー出力： 11000W hybrid solar inverter, 48V DC to 220V/230V AC.
• Dual MPPT Controllers: Built-in 2 MPPT trackers (160A total charging current) for connecting two independent PV systems, each up to 5500W.
• Battery-Optional Operation: Can operate with or without batteries, powering loads directly from PV or AC grid.
• 純正正弦波出力: 繊細な電子機器に適した高品質の AC 電源を提供します。
• Grid-Tie Capability: Can feed excess solar power into the mains grid.
• Integrated BMS Communication: Supports communication with compatible 48V 200AH/100AH batteries for optimized battery management.
• 包括的な保護: Includes short circuit, over-current, over-voltage、undervoltage, overload, charging, and over-temperature protection.
• リアルタイム監視: LCD display and 3 LED indicators for system status, plus built-in WiFi for mobile app monitoring.
• Flexible Charging & Output Modes: Multiple configurable modes for power priority (PV, grid, battery).

図2: Key specifications including 11000W rated power, 230Vac output, 50/60Hz frequency, 5500W*2 Max. PV array power, 60-500Vdc PV array MPPT voltage range, and 160A Max. charge current.

図3: The inverter features built-in WiFi for real-time monitoring via a mobile application, available on Google Play and App Store.

図4: The inverter provides a pure sine wave output, ensuring high-quality AC power for sensitive devices like computers, refrigerators, TVs, and water heaters.

3.2 構成要素と指標

Familiarize yourself with the inverter's external components, display, and indicators for proper operation.

図5: Front panel features an LCD display, status indicator, charging indicator, fault indicator, and function buttons (ESC, UP, DOWN, ENTER). The rear panel includes PV1 input, PV2 input, AC input, Main out, Second out, RS485 port, WiFi antenna port, dry contact port, grounding terminal, battery negative/positive outlet holes, and a power on/off switch.

• LCDディスプレイ: Shows real-time system data and operating status.
• ステータスインジケーター: Indicates the inverter's operational status.
• 充電インジケーター: バッテリーの充電状態を表示します。
• 障害インジケータ： Illuminates when an error occurs, often accompanied by an error code on the LCD.
• 機能ボタン: メニューを移動したり設定を構成したりするために使用されます。
• PV Inputs (PV1, PV2): ソーラーパネルアレイの接続。
• AC入力: Connection for grid power.
• Main Out / Second Out: AC output connections for loads.
• バッテリー端子: 48V バッテリー バンクの接続。
• WiFiアンテナポート: For wireless monitoring.
• RS485 ポート: For communication with external devices, including BMS.
• ドライコンタクトポート: 外部制御信号用。

4. セットアップとインストール

Proper installation is crucial for the inverter's performance and safety. Consult a qualified electrician for installation.

4.1取り付け位置

• Mount the inverter vertically on a solid surface.
• Ensure sufficient clearance (at least 20 cm) around the inverter for proper airflow.
• 直射日光、高温、高湿度を避けてください。
• The installation environment should be free from corrosive gases and dust.

4.2配線接続

配線図をよく読んでください。すべての接続は確実に、かつ正しく極性が合っている必要があります。

図6: Detailed wiring diagram showing connections for solar panels (PV array), utility grid, generator, 48V battery, 230V household load, and 220V household appliances. Note the maximum AC input voltage, AC output power, and maximum PV array power specifications.

• PVアレイ接続: Connect solar panels to PV1 and PV2 inputs. Ensure the PV array voltage is within the 60-500V DC MPPT range and the open circuit voltag500V DCを超えません。
• バッテリー接続: Connect the 48V battery bank to the battery terminals. The inverter is compatible with various battery types including AGM, GEL, FLD, LI, SLD, and USER-defined settings.
• AC 入力接続: Connect the utility grid or a generator to the AC input.
• AC出力接続: Connect your household loads to the Main Out and Second Out terminals.
• 接地: インバータが適切に接地されていることを確認してください。

図7: The inverter is compatible with multiple battery types, including AGM, GEL, FLD, LI (Lithium), SLD, and user-defined settings, with a maximum battery charging current of 100A (AC + DC).

5。 動作モード

The Aninerel hybrid inverter offers flexible configuration options for charging and load priority.

5.1 Charging Priority Modes

These settings control how the battery bank is charged from different power sources.

• 太陽光の優先順位: The inverter prioritizes solar power for charging. AC input will only charge the battery bank when solar power is no longer available.
• 太陽光およびAC入力: The inverter will charge the battery bank from both solar and AC power simultaneously.
• 太陽光発電のみ: The inverter will only charge the battery bank from available solar power.

5.2 Load Priority Modes

These settings determine how your appliances receive power.

• PV Output Priority: The inverter will prioritize solar power to supply the loads first. If solar input is not enough, it will compensate from the AC input.
• National Network Output Priority (AC Priority): The inverter will redirect the AC input to power all loads and will only use DC inputs (battery/PV) when AC input power is not available.
• Battery Output Priority (DC Priority): The inverter will prioritize inverting from solar first. If solar is not enough, it will invert from battery power. Only when battery power is low will it switch to AC input.

図8: Visual representation of charging priority (Solar Priority, Solar and AC input, Solar Only) and load priority (Solar Priority, AC Priority, DC Priority) settings, which can be configured via the inverter's display.

6. メンテナンス

定期的なメンテナンスにより、インバーターの寿命が長くなり、最適なパフォーマンスが確保されます。

• クリーニング： インバーターの外装は定期的に乾いた布で拭いてください。通気口に埃やゴミが詰まっていないことを確認してください。
• 接続: すべての電気接続部の締め付け具合と腐食の兆候がないか毎年点検してください。
• 環境： 動作環境が指定された温度と湿度の範囲内であることを確認してください。
• バッテリーの状態: バッテリーを使用する場合は、バッテリーの状態を監視し、製造元のガイドラインに従って適切にメンテナンスされていることを確認してください。

7。 トラブルシューティング

The inverter's LCD display will show error codes if a fault occurs. Refer to the specific error code in the full product manual (if available) for detailed troubleshooting steps. General troubleshooting tips include:

• 電源なし: Check all power connections (PV, battery, AC input). Ensure the power switch is ON.
• オーバーロード: Reduce the connected load. The inverter has overload protection and may shut down.
• 過熱： Ensure adequate ventilation. Clean any dust from vents.
• バッテリーの問題: バッテリー容量を確認するtage and connections. Ensure battery type settings are correct.
• PV入力の問題: Verify solar panel connections and ensure sufficient sunlight. Check PV array voltage.

If the problem persists after basic troubleshooting, contact Aninerel customer support or a qualified technician.

8. 仕様

9. 保証とサポート

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer, Aninerel. Keep your purchase receipt and product model number (ANJ-HHS-11000W-48V-WIFI) readily available when seeking support.