Flyrivergo Jewelry Polishing Machine and 3-inch Ball Vise User Manual

導入

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your Flyrivergo Jewelry Polishing Machine and 3-inch Ball Vise. This combination tool is designed for precision work in jewelry making, polishing, engraving, and other intricate tasks. Please read this manual thoroughly before using the product to ensure proper function and safety.

安全に関する注意事項

火災、感電、人身傷害の危険を軽減するために、基本的な安全上の注意事項を常に守ってください。

• 機械を操作する前にすべての指示をお読みください。
• Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and a dust mask, especially when polishing.
• Ensure the work area is well-lit and clean. Cluttered benches invite accidents.
• 子供や傍観者を近づけないでください。
• 可燃性の液体、ガス、粉塵などが存在する爆発性雰囲気内で電動工具を操作しないでください。
• 誤って起動しないようにしてください。プラグを差し込む前にスイッチがオフになっていることを確認してください。
• 行き過ぎないでください。 常に適切な足場とバランスを維持してください。
• 調整、付属品の交換、工具の保管を行う前に、電源からプラグを外してください。
• Use the correct tool for the application. Do not force a small tool or attachment to do the job of a heavy-duty tool.
• ツールは丁寧にメンテナンスしてください。より優れた安全なパフォーマンスを得るために、切削ツールを鋭く清潔に保ってください。
• 可動部品のずれや固着、部品の破損、その他工具の動作に影響を与える可能性のある状態がないか確認してください。損傷している場合は、使用前に修理を依頼してください。

パッケージ内容

すべての商品を丁寧に開梱し、すべての部品が揃っていて損傷がないことを確認してください。不足品や破損品がある場合は、カスタマーサポートまでご連絡ください。

画像: 上view of the complete package contents, including the ball vise, polishing machine accessories, and various attachments.

• Jewelry Polishing Machine (Bench Buffer Polisher)
• 3-inch Ball Vise
• Polishing Wheels (e.g., Yellow, White, Fiber)
• Polishing Compounds (e.g., White, Green)
• Various Ball Vise Attachments (pins, jaws, T-wrench)
• ユーザーマニュアル

製品終了view

Jewelry Polishing Machine

画像: 正面 view of the polishing machine, showing its dimensions (17.52" L x 12.8" W x 8.5" H) and key parameters like 110V voltage, 8000 RPM max speed, 800W power, and 22.75 lbs weight.

The polishing machine features a powerful motor for efficient polishing of various materials. It includes a protective cover, a light tube for improved visibility, a dust collector, and an exhaust fan blower for maintaining a clean work environment.

画像: クローズアップ view highlighting the machine's features: integrated light tube, dust collector, exhaust fan blower, and the motor housing.

Different polishing wheels and compounds are available for various applications, from initial buffing to final high-shine polishing.

Image: Display of different polishing accessories: Yellow Wheel, White Wheel, Fiber Wheel, White Compound, and Green Compound.

3-inch Ball Vise

Image: The ball vise showing its adjustable clamping mechanism and the ability for 360-degree free rotation, indicated by arrows.

The 3-inch ball vise provides a stable and adjustable platform for holding small items during intricate work such as engraving, stone setting, and detailed jewelry repair. It features adjustable clamping force and 360-degree free rotation for optimal positioning.

Image: The ball vise demonstrating its versatility in securely holding objects of different shapes and sizes.

仕様

設定

1. Polishing Machine Setup

1. 開梱: Remove the polishing machine and all accessories from the packaging. Inspect for any shipping damage.
2. 配置: Place the polishing machine on a stable, level workbench. Ensure adequate clearance around the machine for ventilation and safe operation.
3. Mounting Polishing Wheels:
   • Select the appropriate polishing wheel and compound for your task.
   • Securely attach the desired polishing wheel to the spindle on each side of the motor. Use the provided wrench to tighten the retaining nuts firmly.
   

   Image: A hand using a wrench to securely attach a polishing wheel onto the machine's spindle.

4. 電源接続: Ensure the power switch is in the "OFF" position. Plug the power cord into a standard 110V electrical outlet.

2. Ball Vise Setup

1. 配置: Place the ball vise on a clean, stable surface. The suction base helps secure it.
2. Attaching Jaws/Pins: Select the appropriate jaws or pins from the accessory set based on the item you intend to hold. Insert them into the vise head and secure them as needed.

操作手順

1. Using the Jewelry Polishing Machine

1. 安全第一: Always wear safety glasses and a dust mask before operating.
2. 電源オン: Flip the power switch to the "ON" position. The motor will start, and the polishing wheels will begin to spin.
3. 速度を調整: Use the speed control knob (if available) to set the desired RPM for your polishing task. Start with a lower speed and gradually increase if necessary.
4. コンパウンドを塗布する: Lightly touch the polishing compound to the spinning wheel to transfer a small amount of compound onto the wheel. Do not over-apply.
5. 研磨: Gently bring the item to be polished into contact with the spinning wheel. Apply light, even pressure and move the item continuously to avoid overheating or creating flat spots.
   

   Image: A close-up of a hand holding a ring against a spinning polishing wheel on the machine.

6. 集塵: The integrated dust collector and exhaust fan will help manage polishing debris. Ensure these are clear and functioning.
7. 電源を切る： Once finished, turn the power switch to "OFF" and allow the wheels to come to a complete stop before leaving the machine.

2. Using the 3-inch Ball Vise

1. 保護対象アイテム: Place the item you wish to work on between the jaws or pins of the ball vise.
2. Cl の調整amp力を加える: Use the adjustment mechanism to gently tighten the jaws until the item is held securely without being damaged.
   

   Image: A hand turning the adjustment knob on the ball vise to control the clamp力を加えます。
3. ポジショニング: The ball vise allows for 360-degree rotation and tilting. Adjust the position of your workpiece as needed for optimal access and comfort.
   

   画像: Three examples demonstrating the ball vise's application in watch maintenance, ring grinding, and holding a rock samp分析用のファイル。

4. Release Item: Once your work is complete, loosen the jaws and carefully remove the item.

メンテナンス

• クリーニング： Regularly clean the polishing machine and ball vise to prevent buildup of dust and debris. Use a soft, dry cloth. For stubborn grime, a slightly damp cloth can be used, ensuring no moisture enters electrical components.
• 集塵機： Periodically empty and clean the dust collector to maintain optimal suction and prevent motor strain.
• Polishing Wheels: Replace polishing wheels when they become worn, glazed, or contaminated with different compounds. Ensure the machine is unplugged before changing wheels.
• Ball Vise Jaws: Clean the jaws and pins of the ball vise to ensure a secure grip. Lubricate moving parts of the vise periodically with a light machine oil to maintain smooth operation.
• ストレージ： Store the tools in a clean, dry environment away from direct sunlight and extreme temperatures.

トラブルシューティング

保証とサポート

For warranty information, technical support, or to order replacement parts, please contact Flyrivergo customer service. Refer to your purchase documentation for specific warranty terms and contact details.

顧客サービス： Please visit the official Flyrivergo webサイトをご覧いただくか、製品パッケージに記載されている連絡先情報を参照してください。