1. はじめに
This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.
The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.
図1: 前面 view of the Traxon Allegro XB36 LED Wall Washer Flood Light.
2. 安全情報
- 電気による危険: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
- 巻tage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
- 接地: Ensure the fixture is properly grounded to prevent electrical shock.
- 屋外での使用: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
- 温度： Do not operate the fixture outside its specified ambient temperature range.
- 取り扱い： Handle the fixture with care. Avoid dropping or subjecting it to severe impact.
- 光源： Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.
3. パッケージ内容
開梱時にすべてのコンポーネントが揃っていて損傷がないことを確認します。
- Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
- 取り付けブラケット（付属または別売）
- 取扱説明書（本書）
Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.
4. セットアップとインストール
4.1 治具の取り付け
- 場所を選択してください: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
- ポジションブラケット: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
- 安全な治具: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.
4.2 電気接続
The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.
図2：背面 view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.
- 電源切断: Turn off the main power supply at the circuit breaker before making any electrical connections.
- 入力電源を接続: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
- デイジーチェーン接続（オプション）: If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
- 安全な接続: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.
図3：背面 view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.
Important: All wiring must comply with local electrical codes and regulations.
5. 操作手順
- 電源オン: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
- 調光： The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
- ビーム角度: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
- 調整： The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.
6. メンテナンス
The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.
- クリーニング： レンズとハウジングを定期的に柔らかくて乾いた布で拭いてください。amp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners or solvents.
- 検査： Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
- 修理: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 照明器具が点灯しません。 | No power supply; loose electrical connection; faulty fixture. | Check circuit breaker and power source. Verify all electrical connections are secure. If problem persists, contact support. |
| 光の出力が不安定、またはちらつきます。 | 互換性のない調光スイッチ、緩い接続、電力の変動。 | Ensure a compatible phase-cut dimmer is used. Check electrical connections. Consult an electrician for power supply issues. |
| 器具内部への水の浸入。 | Improperly sealed cable glands or damaged housing. | Immediately disconnect power. Inspect cable glands and housing for damage. Contact support for repair or replacement. |
8. 仕様
- モデル： XB.W3.8370110
- ブランド： Traxon
- 入力ボリュームtage: 120VAC
- ワットtage: 44ワット
- ルーメン出力: 2631ルーメン
- 色温度（CCT）： 3000K
- 配光： 7°
- 調光： Phase Cut Dimmable
- IP 定格: IP66（屋外定格）
- 工事： Aluminum/Glass
- 仕上げる： 黒
- 商品の重量: 13.14ポンド（5.96kg）
- 製品寸法: 9 x 5.3 x 11.3 インチ (22.86 x 13.46 x 28.7 cm)
- メーカー: オスラム
9. 保証情報
Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.
10. サポート
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.