導入
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your SoFlow SO ONE PRO GEN2 Electric Scooter. Please read this manual thoroughly before first use and retain it for future reference. Adherence to these instructions will ensure optimal performance and longevity of your scooter.
安全ガイドライン
Always prioritize safety when operating the electric scooter. Failure to follow safety instructions can result in serious injury or damage to the product.
- 常にヘルメットと適切な保護具（膝パッド、肘パッド）を着用してください。
- 乗る前に必ずスクーターが完全に充電され、すべてのコンポーネントがしっかりと固定されていることを確認してください。
- Observe all local traffic laws and regulations regarding electric scooter usage.
- Do not ride in adverse weather conditions, such as heavy rain or snow. The scooter has an IPX5 splash protection rating, but it is not fully waterproof.
- 制御不能の原因となる可能性のある、凹凸のある路面、穴、または障害物のある場所での走行は避けてください。
- 歩行者や他の車両から安全な距離を保ちます。
- 最大重量制限の120kgを超えないようにしてください。
- Familiarize yourself with the braking system (front braking) and practice emergency stops in a safe area.
パッケージ内容
開梱したら、すべてのアイテムが揃っていて良好な状態であることを確認してください。
- SoFlow SO ONE PRO GEN2 Electric Scooter
- 充電器
- 組み立てツール
- ユーザーマニュアル（このドキュメント）
- 安全と保証に関する情報
設定
1. スクーターを展開する
Carefully remove the scooter from its packaging. Locate the folding mechanism near the base of the handlebar stem. Release the latch and lift the handlebar stem until it locks securely into the upright position. Ensure the locking mechanism is fully engaged before proceeding.
Image: SoFlow SO ONE PRO GEN2 Electric Scooter in its fully unfolded, ready-to-ride position, view横から編集。
2. Handlebar Assembly (if required)
Some models may require minor handlebar assembly. Use the provided tools to attach the handlebars to the stem, ensuring all screws are tightened firmly. Check that the brake levers and display are correctly oriented and secured.
画像: トップダウン view of the scooter's handlebar, showing the integrated turn signals or end lights.
3. 初期充電
Before first use, fully charge the scooter's battery. Connect the charger to the charging port, typically located on the side of the deck, and then plug it into a power outlet. The charging indicator on the charger will change (e.g., from red to green) when charging is complete. This initial charge may take several hours.
4. Apple Find Myとの統合
Your SoFlow SO ONE PRO GEN2 scooter supports Apple Find My. To enable this feature, follow the instructions provided in the separate Apple Find My setup guide included with your scooter or refer to the official SoFlow app for pairing instructions. This allows you to locate your scooter using your iPhone.
操作手順
1.電源のオン/オフ
To power on the scooter, press and hold the power button on the display unit for a few seconds. The FlowDirections color display will illuminate. To power off, press and hold the power button again until the display turns off.
画像: クローズアップ view of the scooter's intelligent color display, showing speed, battery level, and other riding data.
2. スクーターに乗る
- キックスタート: Place one foot on the deck and use the other foot to push off the ground to gain initial momentum.
- 加速: Once moving, gently press the throttle lever (usually on the right handlebar) to engage the motor. The scooter features a 500W motor for efficient acceleration.
- ブレーキ： Use the brake lever (usually on the left handlebar) to slow down or stop. The scooter is equipped with front braking. Apply brakes smoothly to avoid sudden stops.
- 操舵： Lean your body and gently turn the handlebars to steer.
画像: 詳細 view of the handlebar grip and brake lever, illustrating the control layout.
3. Display Functions (FlowDirections with GPS)
The intelligent FlowDirections display provides real-time information including speed, battery level, riding mode, and navigation data via GPS. Consult the full digital manual or SoFlow app for detailed instructions on customizing display settings and utilizing navigation features.
4. 照明システム
The scooter is equipped with integrated 60 lux lighting for improved visibility. Ensure lights are active when riding in low-light conditions. Reflective 10" TopGrip tires also enhance visibility.
5. 保管・輸送時の折りたたみ
To fold the scooter, disengage the locking mechanism on the handlebar stem and carefully fold the stem downwards until it clicks into its folded position. This compact folding design makes it easier to store or transport.
Image: The SoFlow SO ONE PRO GEN2 Electric Scooter shown in its compact folded configuration, ideal for storage or transport.
6. Kickstand Usage
To park the scooter, deploy the kickstand located on the side of the deck. Ensure the scooter is on a stable, flat surface before releasinギット。
画像: クローズアップ view of the scooter's kickstand, extended to support the scooter in a parked position.
メンテナンス
Regular maintenance ensures the safety and longevity of your SoFlow SO ONE PRO GEN2 Electric Scooter.
- クリーニング： スクーターを広告で拭くamp cloth after use. Avoid using high-pressure water jets or harsh chemicals. Ensure the charging port cover is closed to prevent water ingress.
- バッテリーのケア： バッテリーの良好な状態を保つため、使用していない場合でも定期的に充電してください。バッテリーを完全に放電させないでください。スクーターは涼しく乾燥した場所に保管してください。
- タイヤ点検: Regularly check the 10" pneumatic tires for proper inflation and signs of wear or damage. Maintain recommended tire pressure for optimal performance and safety.
- ブレーキチェック: Periodically inspect the front braking system for responsiveness and wear. Adjust or replace brake components as needed by a qualified technician.
- ファスナーチェック: 毎回乗る前に、すべてのネジとボルトがしっかりと締まっていることを確認してください。
トラブルシューティング
This section addresses common issues you might encounter with your scooter. For more complex problems, contact customer support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スクーターの電源が入らない | バッテリー残量が少ない、接続が緩んでいる、電源ボタンが故障している | バッテリーを充電してください。目に見える接続をすべて確認してください。問題が解決しない場合はサポートにお問い合わせください。 |
| 範囲または出力の低下 | Low battery; Overload; Tire pressure too low; Battery degradation | Fully charge battery; Ensure rider weight is within limits; Inflate tires to recommended pressure; Contact support for battery check |
| ブレーキが効かない | ブレーキケーブルが緩んでいる；ブレーキパッドが摩耗している | Inspect brake cable and adjust tension; Have brake pads inspected and replaced by a professional |
| ディスプレイが機能しない | Loose connection; Software issue | Restart the scooter; Check connections; Contact support |
仕様
Key technical specifications for the SoFlow SO ONE PRO GEN2 Electric Scooter:
| 特徴 | 詳細 |
|---|---|
| モデル名 | So One Pro Gen2 |
| ブランド | ソフロー |
| モーター出力 | 500ワット |
| Maximum Distance (Range) | Up to 65 Kilometers (in LongDrive mode) |
| 最高速度 | 20 km/h |
| 最大重量制限 | 120キログラム |
| ホイールサイズ | 10インチ |
| ホイールタイプ | Pneumatic, Reflective TopGrip |
| ブレーキタイプ | フロントブレーキ |
| フレーム素材 | アルミニウム |
| 特集 | Intelligent FlowDirections Color Display with GPS, Apple Find My Support, 60 Lux Integrated Lighting, IPX5 Splash Protection, Foldable |
| 推奨用途 | Urban transport and commutes |
| アイテム重量 | 1 Kilograms (Note: This value may be a placeholder, actual weight may vary) |
| 製品寸法（長さ x 幅 x 高さ） | 20L x 30l x 20H centimeters (Note: This value may be a placeholder, actual dimensions may vary) |
保証情報
Your SoFlow SO ONE PRO GEN2 Electric Scooter is covered by a manufacturer's warranty. Please refer to the separate 'Safety and Warranty Information' document included in your package for full details on warranty terms, conditions, and duration. Keep your proof of purchase for any warranty claims.
カスタマーサポート
For technical assistance, spare parts, or any questions not covered in this manual, please contact SoFlow customer support. Refer to the official SoFlow website or the warranty document for contact details.