BESTFIRE BFGY72 23,000 BTU Portable Dual-Burner Propane Stove Instruction Manual

1. 重要な安全情報

Please read and understand all safety warnings and instructions before assembling, operating, or servicing this appliance. Failure to follow these instructions could result in fire, explosion, serious injury, or death.

• 屋外での使用のみ： This appliance is designed for outdoor use in well-ventilated areas. Do not use in garages, sheds, or any enclosed areas.
• GAS LEAK CHECK: Always perform a leak test after connecting the gas cylinder. Use a soapy water solution; bubbles indicate a leak. Never use an open flame to check for leaks.
• 換気： 一酸化炭素の蓄積を防ぐために十分な換気を確保してください。
• 可燃物との距離: Maintain a minimum distance of 36 inches (91 cm) from the sides and rear of the appliance to any combustible materials.
• 子供とペット: 作動中および冷却中は、お子様やペットを本製品に近づけないでください。
• 燃料タイプ： This stove is designed for use with LPG (Liquid Propane Gas) only. Do not attempt to use other fuels.
• 安定した表面: ストーブは常に水平で安定した不燃性の面で操作してください。

2.製品オーバーview

The BESTFIRE BFGY72 Portable Dual-Burner Propane Stove is a robust and efficient cooking solution for outdoor enthusiasts. Constructed from durable stainless steel, it features two high-power burners with auto-ignition for convenient and reliable operation.

Figure 2.1: The BESTFIRE BFGY72 Dual-Burner Propane Stove, showcasing its stainless steel construction and included gas hose with regulator.

主な特徴:

• High-Power Dual Burners: 23,000 total BTU output for rapid heating.
• Auto-Ignition: Twist-to-start mechanism for easy lighting without matches.
• 耐久性のある構造: Stainless steel body resists rust and scratches.
• ポータブルデザイン: Compact dimensions (28" L x 14.5" W x 5" H) with non-slip rubber legs.
• 完全なキット: Includes regulator and hose for immediate use (propane tank not included).

Figure 2.2: Detailed diagram of the stove's components and features.

3. セットアップとインストール

Follow these steps to safely set up your BESTFIRE propane stove.

3.1 開梱と初期検査

1. Carefully remove the stove and all components from the packaging.
2. Inspect for any damage during shipping. Do not use if damaged.
3. Ensure all accessories are present: stove unit, gas hose, and regulator.

3.2コンポーネントのインストール

1. ゴムパッドの取り付け: If not pre-installed, attach the four rubber pads to the bottom of the stove for stability.
2. Install Burner Rings/Supports: Place the metal burner rings securely over each burner head.

図 3.1: 拡大図 view of the burner assembly and footrest details.

3.3 ガス供給の接続

1. Connect Hose to Stove: Securely attach the gas hose to the gas inlet on the side of the stove. Use a wrench to tighten the connection, ensuring it is snug but do not overtighten.
2. Connect Regulator to Propane Tank: Attach the regulator to a standard QCC1/Type1 propane tank cylinder (5-40LB capacity). Ensure the regulator control knob and cylinder valve are in the OFF positions before connecting. Hand-tighten the connection.

Figure 3.2: Proper connection of the CSA certified regulator and hose to a propane tank.

重要： The propane tank is not included with the stove.

4. 操作手順

4.1 バーナーの点火

1. Ensure the stove is on a stable, level surface and all gas connections are secure.
2. プロパンタンクのバルブをゆっくり開きます。
3. Push in and turn the desired burner knob counter-clockwise to the HIGH position. You should hear a clicking sound from the auto-ignition.
4. If the burner does not ignite within 5 seconds, turn the knob to OFF, wait 5 minutes for gas to dissipate, and repeat the process.
5. 初回使用時の注意: During the first use, it may take several attempts (up to 7 or more ignitions) for the burner to light, as air needs to be purged from the gas hose.

4.2 炎の調整

Once lit, rotate the burner knob to adjust the flame intensity from HIGH to LOW as needed for cooking.

4.3 コンロの火を消す

1. すべてのバーナーノブをオフの位置に回します。
2. プロパンタンクのバルブを閉じます。

5. メンテナンスと清掃

定期的なメンテナンスにより、ストーブの寿命が長くなり、安全に操作できるようになります。

5.1 Cleaning the Stove Surface

• 掃除する前にストーブが完全に冷めるまで待ちます。
• ステンレスの表面を広告で拭きますamp cloth and mild detergent. Avoid abrasive cleaners that can scratch the finish.
• Remove burner rings and clean separately if necessary.

5.2 バーナーのメンテナンス

• Periodically check burner ports for blockages (e.g., food debris). Use a small wire or needle to clear any obstructions.
• Ensure the burner heads are properly seated after cleaning.

6。 トラブルシューティング

ストーブに問題が発生した場合は、次の一般的な問題と解決策を参照してください。

7. 仕様

8. 保証とサポート

For warranty information, technical support, or replacement parts, please contact BESTFIRE customer service. Refer to your product packaging or the official BESTFIRE web連絡先の詳細についてはサイト。