NARWAL YJCC032
NARWAL Freo S ロボット掃除機とモップのコンボ ユーザーマニュアル
Model: YJCC032 | Brand: NARWAL
導入
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your NARWAL Freo S Robot Vacuum and Mop Combo. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

The NARWAL Freo S Robot Vacuum and Mop Combo, featuring its sleek design and accompanying self-emptying base station.
セットアップガイド
パッケージ内容
Before beginning setup, ensure all components are present in the box:
- ロボット × 1
- 基地局×1
- サイドブラシ×1
- Mop Cloth × 1
- Main Unit Filter Assembly × 1
- ダストバッグ×1
- クリーニングブラシ×1
- ユーザーマニュアル×1

A visual representation of all items included with your NARWAL Freo S Robot Vacuum and Mop Combo.
初期設定
- 開梱: Remove all packaging materials from the robot and base station.
- 配置: Place the base station on a hard, level surface against a wall, ensuring at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front.
- 電源接続: ベースステーションを電源コンセントに差し込みます。
- 最初の請求: Place the robot onto the charging contacts of the base station. Ensure it is properly aligned. The robot will begin charging automatically. For first use, fully charge the robot.
- アプリのダウンロード: Download the Narwal app from your mobile device's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network (2.4GHz only).
操作手順
ナビゲーションとマッピング
The Narwal Freo S utilizes high-precision LDS Laser Navigation to scan your home in 360° and create accurate real-time maps. This allows for efficient path planning and supports multi-floor map storage, making it ideal for multi-level homes.

The robot uses advanced laser navigation for precise mapping and efficient cleaning paths.
吸引力
Equipped with 8,000 Pa suction, the Freo S effectively lifts dust, pet hair, and debris from various floor types. Actual performance may vary based on floor type and dust level.

The powerful 8,000 Pa suction effectively cleans various debris, including hair, pet food, and crumbs.
High-Performance Mopping
The 8N downward pressure effectively removes tough stains, while three water flow level options and a 300ml detachable tank adapt to various messes. The 3-in-1 composite mop material ensures efficient scrubbing, and the dual-layer mop cleans dried spills and greasy patches on any surface.

The robot's mopping system applies consistent pressure and adjustable water flow for thorough cleaning.
Obstacle Avoidance and Climbing
Advanced forward structured light and multi-sensors help detect furniture and low-lying obstacles, ensuring a smooth, uninterrupted cleaning experience. The robot can also climb over thresholds and rugs up to 20mm (0.78 inches).

The robot's sensors enable precise obstacle detection and avoidance.

The robot is capable of effortlessly climbing over small obstacles like thresholds.
スマートアプリと音声コントロール
Control your Freo S anytime, anywhere via the Narwal app. Adjust suction or mopping levels, set no-go zones, schedule cleanings, and more. It is compatible with Alexa and Google Assistant for convenient voice control.

Manage your robot vacuum with ease using the Narwal app on your smartphone or smartwatch.
メンテナンスガイド
Regular maintenance ensures optimal performance and extends the lifespan of your NARWAL Freo S. Refer to the video below for visual instructions on key maintenance tasks.
Official maintenance guide for the NARWAL Freo S Robot Vacuum and Mop Combo, demonstrating how to clean and replace various components.
1. サイドブラシ
The side brush comes pre-installed. To remove for cleaning, use a cross-head screwdriver to rotate clockwise. Use a wipe towel to clean dust on the side brushes. After cleaning, rotate counterclockwise to reinstall.
(Refer to video: 0:04 - 0:35)
2. Roller Brush
Press the release button on both sides to open the roller brush's cover. Pinch one end of the roller brush and lift it out. For hair entanglement, use the included hook tool in the dock to cut tangled hair. Manually remove cut hair to restore normal operation. Clean dust with a damp cloth. Wipe the bottom of the roller brush holder with wet wipes. Ensure proper alignment when reinstalling. A "click" sound indicates proper installation.
(Refer to video: 0:35 - 1:18)
3. Mop Pads
Pinch one end of the pad and lift upward the mop module. Detach the mop pads from the velcro. Wash used pads with detergent. 注記: Use only Narwal-approved detergent to avoid damage to the mop pads. Air-dry the cleaned mop pads in shade. To reinstall, align clean mop pads with the mop module. Secure Velcro firmly to prevent mop from falling off. Press down the mop module until both clips click into place.
(Refer to video: 1:18 - 1:57)
4.ダストバッグ
Open the dock lid. Pull up on the dust bag handle to remove. To replace, align new dust bag with slots and press down. Handle flush with slots indicates proper installation. 注記: It is recommended to replace the dust bag every three months.
(Refer to video: 1:57 - 2:18)
5. 2-in-1 Dust Bin & Water Tank
Press the release button while pulling it outward. To clean the dust bin, press the latch to open it. Empty debris and clean interior. Open the dust bin top cover. Remove HEPA filter. Clean debris on the filter. After cleaning, put it back into the dust bin. Put the water tank back until it clicks into place. When you hear a click, it is properly installed. To refill water tank, open left-side waterproof plug. Fill with clean water. After filling the water, re-seal plug tightly to prevent leaks.
(Refer to video: 2:18 - 3:07)
6.キャスター
Pull the caster upward. Remove foreign objects. 注記: It is recommended to clean it every month. Wipe away the dust with a damp cloth. Dry and reinstall.
(Refer to video: 3:07 - 3:23)
7. センサーと充電接点
Freo S features 6 sensors and 2 charging contacts. Gently wipe with a soft cloth. This includes the cliff sensors, structured light sensor, infrared anti-drop sensor, and charging contacts.
(Refer to video: 3:23 - 3:47)
トラブルシューティング
If you encounter issues with your NARWAL Freo S, please refer to the following common solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ロボットがオンにならない、または充電されません。 | Low battery; improper contact with charging base; power outlet issue. | Ensure robot is properly seated on the charging base. Check power connection and outlet. Allow robot to charge for several hours. |
| 吸引性能が悪い。 | Full dust bin; clogged filter; tangled roller brush. | Empty the dust bin. Clean or replace the HEPA filter. Remove any tangled hair or debris from the roller brush. |
| モップがけの効果がない。 | Dry mop pads; empty water tank; clogged water nozzle. | Ensure mop pads are damp. Refill the water tank. Clean the water nozzle if clogged. |
| ロボットが頻繁に動けなくなります。 | Obstacles on the floor; dirty sensors. | Clear obstacles from the cleaning path. Clean all sensors on the robot and base station. |
| Wi-Fi接続の問題。 | Incorrect Wi-Fi password; 5GHz network; router interference. | Ensure correct 2.4GHz Wi-Fi network is selected. Restart your router and the robot. |
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ナーワル |
| モデル名 | Narwal Freo S |
| モデル番号 | YJCC032 |
| 特集 | Robot Vacuum and Mop Combo, 8,000Pa Powerful Suction, Precise Navigation & Obstacle Avoidance, High-Performance Mopping with 8N Pressure, Smart App & Voice Control |
| 色 | 白 |
| 製品寸法 | 長さ12.9インチ x 幅3.9インチ x 高さ12.9インチ |
| 含まれるコンポーネント | Robot × 1, Base station × 1, Side Brush ×1, Mop Cloth ×1, Main Unit Filter Assembly ×1, Dust Bag ×1, Cleaning Brush ×1, User Manual ×1 |
| フィルタータイプ | スポンジ |
| バッテリー寿命 | 210 minutes |
| ダストバッグ容量 | 3.5リットル(ハンズフリーで最大180日間) |
| アイテム重量 | 16.5ポンド |
| メーカー | ナルワル |
保証とサポート
For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official NARWAL web公式サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。また、補償範囲を拡張できる保護プランもご用意している場合があります。
訪問する NARWAL Store on Amazon 詳細についてはこちらをご覧ください。
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.