SUPBAND HY
SUPBAND Pro+ Knee Massager 5-in-1 User Manual
Model: HY
導入
Thank you for choosing the SUPBAND Pro+ Knee Massager. This device is designed to provide targeted relief and comfort to your knees through a combination of red light therapy, 3D massage, vibration, and heat. Please read this manual thoroughly before use to ensure proper operation and to maximize your experience.

図1: The SUPBAND Pro+ Knee Massager main unit, featuring a sleek white design with a black control panel.
安全情報
次の安全上の注意事項を守ってください。
- The knee massager must be fully charged before its initial use.
- Do not use the device if you have any open wounds, skin irritations, or severe medical conditions on the area to be treated. Consult a physician if unsure.
- デバイスを水や高湿度に近づけないでください。
- 自分でデバイスを分解したり修理したりしないでください。 サポートが必要な場合は、カスタマー サポートにお問い合わせください。
- お子様の手の届かない場所に保管してください。
- このデバイスは、病気や健康状態の診断、治療、治癒、または予防を目的としたものではありません。
製品の特徴
The SUPBAND Pro+ Knee Massager combines multiple therapeutic functions:
- 赤色光療法: Utilizes red light to support circulation.
- 3D Massage Technology: Features unique 3-directional massage nodes for deep relief.
- 3つの振動モード: Offers low, high, and auto vibration settings for stiff joints.
- 3段階の熱さ: Provides adjustable heat (115℉/130℉) to relax muscles.
- 調整可能なタイマー: Includes 15-30 minute auto shut-off for convenience.
- コードレス&充電式: Equipped with a 2600mAh USB-C battery for portable use.

図2: 以上view of the massager's key functionalities including red light, heating, vibration, and simulated massage.
製品構成
Familiarize yourself with the parts of your SUPBAND Pro+ Knee Massager:

図3: 詳細 view of the massager with labeled components: Type-C Charging Port, Cloth Mesh, Touch Screen Control Panel, Strap Buckle, Vibration Pads, Fastening Straps, and Red Light.
- タッチスクリーンコントロールパネル: For operating all functions.
- Type-C充電ポート: デバイスの充電用。
- Fastening Straps & Strap Buckle: To secure the massager to your knee.
- 振動パッド: Deliver massage sensations.
- 赤色光エミッター: Provide red light therapy.
- Cloth Mesh: Inner lining for comfort and hygiene.
設定
1. デバイスの充電
Before first use, fully charge the massager. Connect the provided USB-C cable to the charging port on the device and to a suitable USB power adapter (not included). The LED screen will indicate charging status. A full charge typically takes approximately 3-4 hours.

図4: Inserting the USB-C charging cable into the device's Type-C port.
2. 使用の準備
For optimal touch screen responsiveness, it is recommended to remove any protective film from the control panel before use.
3. マッサージ器の装着
Place the massager on your knee, ensuring the internal components are centered over the joint. Secure it with the fastening straps and buckle. The adjustable circumference of the strap ranges from 11.8 to 20.4 inches to accommodate various sizes.

図5: The massager secured around the knee, illustrating its comprehensive coverage.
For effective massage, ensure proper posture. Avoid standing with a straight leg or bending the knee at an angle less than 90 degrees, as this may reduce the effectiveness of the pressure massage.

図6: Guidance on proper posture for optimal massage effectiveness, showing correct and incorrect knee positions.
操作手順
The device features an intuitive LED touchscreen for easy control.

図7: The LED touchscreen control panel, showing various settings and indicators.
1. 電源のオン/オフ
- を押し続けます オン/オフ button on the control panel to turn the device on.
- を押し続けます オン/オフ ボタンをもう一度押すとデバイスの電源がオフになります。
2. 設定を調整する
Tap the corresponding icons on the LED touchscreen to adjust settings:
- 熱: タップして 加熱 icon to cycle through 3 heat levels (Low, Medium, High). The temperature ranges from 115℉ to 130℉.
- 振動モード: タップして モード icon to select from 3 vibration modes (Low, High, Auto).
- 赤信号: タップして 赤信号 icon to turn the red light therapy on or off.
- タイマー: タップして 時間 icon to set the automatic shut-off timer for 15, 20, 25, or 30 minutes.


図8: Interacting with the Heating and Mode controls on the touchscreen.
The device is designed for use on the knee, elbow, or shoulder. Adjust the straps to ensure a snug and comfortable fit for the targeted area.

図9: The versatility of the massager for use on the shoulder, elbow, and knee.
メンテナンス
1. 清掃
- 掃除する前に、デバイスの電源がオフになっていて、プラグが抜かれていることを確認してください。
- マッサージ器の外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤を使用したり、デバイスを水に浸したりしないでください。
- The cloth mesh can be gently wiped clean.
2. ストレージ
- マッサージ機は直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- 損傷を防ぐために、デバイスを元の梱包または保護ケースに入れて保管してください。
トラブルシューティング
If you encounter any issues with your SUPBAND Pro+ Knee Massager, please refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デバイスの電源が入らない。 | バッテリー残量が少ないか、充電されていません。 | Ensure the device is fully charged before use. Press and hold the On/Off button for a few seconds. |
| Heat or vibration is weak. | Incorrect setting or improper fit. | Adjust heat/vibration levels on the touchscreen. Ensure the massager is snugly fitted to the knee and your posture is correct. |
| タッチスクリーンが反応しない。 | Protective film still on or temporary software glitch. | Remove any protective film. Try turning the device off and on again. Ensure hands are clean and dry. |
| デバイスが充電されていません。 | ケーブル、アダプタ、またはポートに障害があります。 | Try a different USB-C cable and power adapter. Ensure the cable is securely connected to both the device and the power source. |
If the problem persists, please contact SUPBAND customer support.
仕様
- モデル: HY
- 製品寸法: 11 x 8 x 5.2インチ
- 商品の重量: 1.7 ポンド
- 電源: 電池駆動
- バッテリー: リチウムイオン電池1個(付属)、2600mAh
- 材料: アクリロニトリルブタジエンスチレン
- 熱レベル: 3 (approx. 115℉/130℉)
- 振動モード: 3 (Low, High, Auto)
- タイマー設定 15、20、25、30分
- 充電ポート: USB-C
- ブランド: SUPBAND
保証とサポート
For warranty information or technical support, please contact the manufacturer, SUPBAND, through their official channels or the retailer from whom you purchased the product. Please have your model number (HY) and purchase date available when contacting support.
さらに詳しいサポートが必要な場合は、 Amazonの商品ページ.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.