Sunster 8KW ディーゼルエアヒーター ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the safe and efficient operation of your Sunster 8KW Diesel Air Heater. Please read all instructions carefully before use to ensure proper functionality and safety.

主な特徴:

• Smart Panel Control: Offers constant temperature control (automatic start/stop), timing function, ventilation mode, and turbo heat mode.
• Bluetooth アプリ コントロール: Adjust settings, create heating plans, and monitor performance via the 'Sunster' app.
• デュアル電源： Compatible with 12/24V DC and 110-240V AC power sources, automatically switching between vehicle and household power.
• 換気機能: Circulates air when not heating, useful for dissipating heat in warmer conditions.
• 自動スタート/ストップ: Automatically shuts off when the set temperature is reached and reactivates when the temperature drops, enhancing energy efficiency.
• 高効率: Heating efficiency ≥ 90%, with precise oil control (0.26-0.48L/h). One gallon of fuel can heat approximately 20 square meters overnight.
• 低騒音動作: Upgraded silent fuel pump operates at ≤ 35 dB.
• 安全保護： Includes overheating, short circuit, reverse connection, and overvoltage保護。

2.製品コンポーネント

The following components are typically included with your Sunster 8KW Diesel Air Heater:

図2.1: Main unit and accessories. This image displays the main heater unit, LCD switch, remote control, connection holders, manual, silencer, battery power cord, exhaust pipe, fixture accessories set, AC-DC adapter power, and flexible air outlet pipe.

• Main Diesel Air Heater Unit
• 液晶表示スイッチ
• リモートコントロール
• Connection Holders (Base Clips)
• ユーザーマニュアル
• サイレンサー
• Battery Power Cord (12/24V DC)
• 排気管
• Fixture Accessories Set (screws, clamps)
• AC-DC Adapter Power (110-240V AC)
• Flexible and Stretchable Air Outlet Pipe
• Intake Pipe with Integrated Air Filter

3.インストールガイド

Follow these steps for proper installation of your diesel air heater. Ensure all connections are secure before operation.

3.1 開梱と初期セットアップ

1. 開梱内容: Carefully open the box and remove all components. Verify that all items listed in Section 2 are present.
2. Install Base Clips: Attach the provided base clips to the bottom of the heater unit. These clips help secure the unit.
3. Elevate Unit (Optional): If needed, place the heater on wood blocks or other stable objects to elevate it for easier access during pipe installation.

3.2 Exhaust and Intake Pipe Installation

1. 排気管の取り付け: Connect the exhaust pipe to the designated port on the heater. Ensure it is securely fastened with clamps. The exhaust pipe must lead to the outside to safely vent exhaust gases. Maintain a safe distance between the exhaust pipe and the oil pipe, as the exhaust pipe becomes very hot during operation.
2. Install Intake Pipe and Air Filter: Attach the intake pipe and integrated air filter to the corresponding port. Secure with clamps.
3. Install Silencer: Secure the silencer to the end of the exhaust pipe using clamps and the provided bracket.

図3.1: 詳細 view of exhaust pipe and air filter installation. The exhaust pipe is connected to the heater and routed outwards, while the intake pipe with its filter is attached to the other side.

3.3 Outlet Duct Installation

1. Install Outlet Duct: Connect the flexible air outlet duct to the heater's hot air outlet. Secure it with a clamp.

3.4電源接続

1. 接続電源： Link the power supply wires: red to positive (+) and black to negative (-). For AC power, use the provided AC-DC adapter. For DC power, connect directly to a 12V or 24V battery.

3.5燃料補給

1. Add Diesel Fuel: Fill the fuel tank with appropriate diesel fuel. Ensure the fuel cap is securely tightened after filling.

3.6 インストールビデオ

4. 操作手順

4.1コントロールパネルオーバーview

図4.2: LCD Control Panel. This image highlights the various functions of the LCD control panel, including operation method, time setting, pump oil volume setting, remote control code, temperature control conversion, fault display, timing function, automatic start & stop, turbo heat mode, display altitude, and ventilation function.

4.2 電源オン/オフ

• スイッチをつける： In shutdown state, press the "ON/OFF" button on the control panel or remote control.
• 電源を切るために： In power-on state, press the "ON/OFF" button on the control panel or remote control.
• 重要な注意: The machine will automatically dissipate heat for approximately 30 minutes after being turned off. Do not force power off midway, as this can prevent proper heat discharge.

4.3 Mode and Temperature Adjustment

• スイッチングモード: In power-on state, press the [knob] on the control panel to cycle through different modes (e.g., temperature control mode, constant temperature mode, gear mode).
• Numerical Adjustment: Rotate the [knob] clockwise to increase the gear/temperature (+1 unit per click, up to 10 gears or 36°C). Rotate counter-clockwise to decrease the gear/temperature (-1 unit per click, minimum to 1 gear or 8°C).

4.4 Basic Settings (Base Model)

To access basic settings, long press the "ON/OFF" button for 3 seconds when the unit is powered on. The upper left corner of the screen will display setting items (F0, F1, etc.). Rotate the [knob] to navigate and adjust values. Press the [knob] again to confirm changes.

• F0: Current Time - Adjust the current time.
• F1: Start-up Time - Set a scheduled start time.
• F2: Running Time (After Starting) - Set the duration of operation (30 minutes is 1 unit, adjustment range: 0-10 hours).
• F3: Self-starting Switch Settings - 'ON' is open, 'OF' is closed.
• F4: Language Switch - Select language (Chinese, English, Russian) or turn voice off.
• F5: Temperature Compensation - Adjust temperature compensation (range: -9 to 9°C).
• F6: Fuel Tank Volume - Set the fuel tank volume (5L is 1 unit, adjustment range: 5-50L).
• F7: Oil Pump Type - Select oil pump type.
• F8: Constant Temperature Heating - 'ON' is open, 'OF' is closed.
• F9: Temperature Switching Unit - Switch between °F and °C.
• FA: Screen Brightness - Adjust screen brightness (range: 5-100).
• Fb: Full Tank - Long press the [knob] and release after hearing the prompt tone to set full tank.
• FC: CO Numerical Detection - In power-on state, press the [knob] twice in a row to check the CO value.

4.5 Engineering Mode

To enter engineering mode, press the [knob] for 5 seconds when the unit is powered on. The upper right corner will show the current project (En00, En01, etc.). Rotate the [knob] to adjust the item and view データ。

• E0: Heater Main Board Version Number
• E1: Fault Code
• E2: Shell Temperature
• E3: Supply Voltage
• E4: Heater Running Gear
• E5: Cab Temperature
• E6: Altitude
• E8: Remote Control Matching
• E9: Bluetooth Matching

4.6 リモートコントロールマッチング

• マッチング： In shutdown state, press the [knob] three times in a row. The screen will display "P-1". Press any button on the remote control. If successful, the interface will automatically exit, and the remote control can now operate the heater.
• データの消去: To clear matching data, press and hold the [ON/OFF] button when powered on. Wait for the interface to show "CLr" which then becomes "SUC" (Success).

4.7 Manual Pump Oil

• Long press the [knob] for 5 seconds when powered on and turned off for the first time. The screen will flash and show a 300-second countdown. Wait for the countdown to end or press [ON/OFF] to end pumping oil.

4.8 Bluetooth接続

• アプリをダウンロードする： Open your device's app store (e.g., Apple App Store, Google Play Store) and search for "Sunster". Download and install the application.
• View Bluetoothコード: In power-on state, press the [knob] for 5 seconds to enter engineering mode. Adjust to 'En09' to view the Bluetooth code.
• 接続する： Open the Sunster mobile app and ensure Bluetooth is enabled on your device. 検索する Bluetooth devices and connect to your heater. Once connected, the heater can be operated through the mobile app.

5. メンテナンス

Regular maintenance ensures the longevity and efficient operation of your diesel air heater.

• 燃料品質： Always use clean, high-quality diesel fuel to prevent blockages and ensure efficient combustion.
• エアフィルター: Periodically inspect and clean or replace the integrated air filter to maintain optimal air quality and heater performance.
• 排気システム: Regularly check the exhaust pipe and silencer for any blockages, damage, or leaks. Ensure the exhaust path remains clear and free of flammable materials.
• 一般的な清掃: ヒーターの外側を清潔に保ち、ほこりやごみが付かないようにしてください。

6。 トラブルシューティング

If you encounter issues with your heater, refer to the following general troubleshooting tips. For specific fault codes, consult the 'Engineering Mode' section (E1: Fault Code) and refer to the full product manual or contact customer support.

• ヒーターが始動しない:
  • Check power connections (12/24V DC or 110-240V AC).
  • Ensure sufficient diesel fuel in the tank.
  • Verify the 'ON/OFF' button or remote control signal.
• 熱不足:
  • Check the selected gear/temperature setting.
  • Inspect the air intake and outlet for obstructions.
  • エアフィルターがきれいであることを確認してください。
• 異常なノイズ:
  • Check for loose components or obstructions in the fan area.
  • Verify proper installation of the silencer and exhaust pipe.
• エラーコード: If an error code appears on the LCD display, enter 'Engineering Mode' (Section 4.5) to identify the specific fault code (E1). Refer to the comprehensive manual or contact Sunster customer support for detailed solutions.

7. 仕様

8. 保証とサポート

For warranty information, technical support, or service inquiries, please contact Sunster customer service directly. Keep your purchase receipt and product model number handy for faster assistance.

You can visit the official Sunster store for more information: Sunster Store