MOOKA HKB320F

MOOKA HKB320F Air Purifier Instruction Manual

Model: HKB320F | Brand: MOOKA

1. はじめに

Thank you for choosing the MOOKA HKB320F Air Purifier. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

The MOOKA HKB320F is designed for large rooms up to 2800 sq. ft., featuring a double-sided air intake for faster purification. It includes a smart PM2.5 air quality sensor, AI mode, washable pre-filters, and H13 HEPA filtration to effectively remove pet hair, odors, smoke, dust, and pollen.

2. 重要な安全情報

火災、感電、または怪我のリスクを軽減するために、電気製品を使用するときは常に基本的な安全上の注意事項に従ってください。

  • アプライアンスを操作する前に、すべての指示をお読みください。
  • コードやプラグが損傷している機器は操作しないでください。
  • 濡れた状態またはdでアプライアンスを使用しないでくださいamp 環境。
  • 電源コードを加熱された表面から遠ざけてください。
  • 空気清浄機を移動、清掃、またはフィルターを交換する前には必ずプラグを抜いてください。
  • 空気の入口と出口が塞がれていないことを確認してください。
  • この機器は家庭用にのみご使用いただけます。

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

  • MOOKA HKB320F Air Purifier Unit
  • Pre-installed Filter Set (2x washable pre-filters, 2x H13 HEPA filters, 2x activated carbon filters)
  • 電源アダプター
  • 4 Wooden Legs (optional installation)
  • 脚用ネジ
  • ユーザーマニュアル

4. セットアップとインストール

4.1 Installing the Legs (Optional)

The air purifier can be used with or without the included wooden legs. If you choose to install them:

  1. Carefully turn the air purifier upside down on a soft, stable surface.
  2. Align each wooden leg with the designated mounting holes on the bottom of the unit.
  3. Insert a screw through the leg and into the mounting hole.
  4. Tighten the screw with a screwdriver until the leg is securely attached. Repeat for all four legs.
Diagram showing how to install the wooden legs on the MOOKA HKB320F Air Purifier.

Image: Installation guide for the air purifier legs. Align the screw with the leg hole and base mounting hole, then tighten.

Video: Demonstrates the step-by-step process of installing the wooden legs onto the MOOKA HKB320F Air Purifier.

4.2 Filter Installation and Preparation

The filters come pre-installed but are sealed in plastic for protection during shipping. You must remove the plastic packaging before first use.

  1. 空気清浄機のプラグをコンセントから抜きます。
  2. Gently pull the front cover to detach it from the unit.
  3. フィルターアセンブリを取り外します。
  4. Carefully remove all plastic packaging from the pre-filter, HEPA filter, and activated carbon filter.
  5. Reassemble the filters, ensuring the activated carbon layer faces the fan.
  6. Insert the filter assembly back into the unit.
  7. Reattach the front cover, ensuring the light strip on the cover aligns with the holes on the air purifier for the PM2.5 indicator to function correctly.
  8. Repeat the process for the back cover and filter assembly.
Diagram showing filter replacement notification and steps to replace filters.

Image: Illustration of the filter replacement process, including checking the indicator, replacing the filter, and resetting the reminder.

Video: Highlights the difference between the front and back covers of the MOOKA HKB320F Air Purifier and how to correctly align the front cover for the PM2.5 indicator.

5. 操作手順

5.1コントロールパネルオーバーview

The control panel is located on the top of the air purifier. It features touch-sensitive buttons and a digital display.

Diagram of the MOOKA HKB320F Air Purifier control panel showing AI/SLP mode settings.

Image: Close-up of the control panel, illustrating the AI/SLP mode and its functions for automatic fan speed adjustment and sleep mode.

Video: A detailed introduction to the buttons and functions on the MOOKA HKB320F Air Purifier's control panel.

5.2 電源オン/オフ

を押す オン/オフ button to turn the air purifier on or off. Upon powering on, the unit will perform an air quality detection for a few seconds before displaying the PM2.5 value.

5.3 ファン速度調整

を押す スピード button to cycle through different fan speeds: Low (L), Medium (M), and High (H).

5.4 AI/SLP Mode

  • AIモード: を押す AI/SLP button to activate AI mode. The screen will display "AI" for 3 seconds, then switch to the PM2.5 value. In AI mode, the fan speed automatically adjusts based on real-time air quality (Good: Low Speed, Moderate: Middle Speed, Poor: High Speed).
  • Sleep Mode (SLP): を押す AI/SLP button again to enter Sleep Mode. In this mode, the lighting and display turn off, and the fan operates at a whisper-quiet 20dB for a peaceful environment. Press any button to wake up the sleep mode and switch to other modes.

5.5 タイマー設定

を押す タイマー button to set an auto-off timer for 2, 4, or 8 hours. The unit will automatically shut down after the selected time.

Diagram showing the smart timer setting options for the MOOKA HKB320F Air Purifier.

Image: Illustration of the timer settings (2H, 4H, 8H) available on the control panel.

5.6チャイルドロック

を押し続けます ロック button for 3 seconds to activate or deactivate the child lock. When activated, all other buttons will be unresponsive to prevent accidental operation.

6. メンテナンス

6.1 Filter Replacement Reminder

The air purifier has a filter replacement reminder function. When the リセット indicator lights up red, it's time to replace the filters. We recommend replacing the air filter every 6-8 months for optimal performance. Official replacement filters can be purchased on Amazon by searching B0FB82PXYH.

Diagram showing filter replacement notification and steps to replace filters.

Image: Illustration of the filter replacement process, including checking the indicator, replacing the filter, and resetting the reminder.

6.2 Cleaning the Washable Pre-Filter

The pre-filter is designed to capture large particles like hair, pet fur, and lint, and can be cleaned to extend its life.

  1. Unplug the air purifier and remove the front and rear covers.
  2. Carefully remove the pre-filter from the filter assembly.
  3. Vacuum the pre-filter to remove loose debris, or rinse it under running water until clean.
  4. Ensure the pre-filter is completely dry before re-installing it.
  5. Reassemble the filters and covers.
Image showing how to wash the pre-filter and clean it from pet hair.

Image: Visual guide on how to clean the washable pre-filter by rinsing with water or vacuuming pet hair.

Video: Demonstrates the cleaning process for the washable pre-filter of the MOOKA HKB320F Air Purifier.

7. 仕様

ブランド真岡
モデル番号HKB320F
製品寸法奥行き6.93インチ x 幅11.73インチ x 高さ16インチ
アイテム重量7.04 ポンド
電源DC (100-240V compatible)
カバーエリア最大2800平方フィート。
騒音レベル20dB(スリープモード)
濾過タイプDouble-Sided H13 HEPA, Activated Carbon, Washable Pre-Filter
特集PM2.5 Air Quality Sensor, AI Mode, 5 Fan Speeds, 3 Timer Settings (2/4/8H), Child Lock, Filter Replacement Reminder

8。 トラブルシューティング

If you encounter any issues with your MOOKA HKB320F Air Purifier, please refer to the following common solutions:

  • ユニットの電源が入らない: Ensure the power adapter is securely plugged into both the unit and a working electrical outlet. Check if the plastic packaging has been removed from all filters and the covers are correctly installed.
  • 空気浄化不良: Check if the filters are dirty and require cleaning or replacement. Ensure the air inlet and outlet are not obstructed. Verify that the unit is operating at an appropriate fan speed for the room size.
  • PM2.5 indicator not lighting up: Ensure the front cover is correctly aligned and the light strip is properly connected to the unit's sensors.
  • ボタンが反応しない: Check if the Child Lock is activated. Deactivate it by pressing and holding the LOCK button for 3 seconds.
  • 異常なノイズ: Ensure the unit is placed on a flat, stable surface. Check for any foreign objects inside the unit or if filters are improperly installed.

9. 保証とサポート

MOOKA HKB320F air purifier is fully certified by ETL, FCC, DOE, and CARB, ensuring zero ozone emissions and eco-friendly operation. We offer a 2-year replacement service and lifetime technical support for this air cleaner. If you encounter any problems during use, please contact us, and we will solve it for you within 24 hours.

For customer support, please refer to the contact information provided in your product packaging or visit the official MOOKA webサイト。

© 2025 MOOKA. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.