MAIMEIMI Universal Motorcycle Digital Speedometer Gauge

1.製品オーバーview

The MAIMEIMI Universal Motorcycle Digital Speedometer Gauge is a multi-functional instrument designed for motorcycles. It provides real-time data including speed, engine RPM, gear indication, odometer readings, oil level, and steering indicators. This gauge cluster offers integrated data monitoring for various riding conditions.

画像1.1：正面 view of the MAIMEIMI Universal Motorcycle Digital Speedometer Gauge.

主な特徴:

• 統合ディスプレイ: Shows speed, tachometer (RPM), 1-6 gear indicator, odometer (ODO/TRIP), oil level, and steering indicators.
• Adjustable Tire Size: Compatible with various tire sizes, adjustable from 40" to 118".
• 広い速度範囲: Speed display range of 0-199 MPH.
• タコメーター範囲: 0-12 (x1000r/min).
• 走行距離追跡: Cumulative mileage (ODO) 0-999999 KM/MILES, subtotal mileage (TRIP) 0.0-999.9 KM/MILES.
• オイル不足アラーム: Flashing outer frame and indicator light when oil level is below the alarm value.
• 防水設計： Constructed from high-quality ABS material with an epoxy resin sealed LCD screen for clear visibility in various weather conditions.
• ユニバーサル互換性： Suitable for most 1/2 cylinder motorcycle engines with a 12V DC voltageシステム。

Image 1.2: The speedometer installed on a motorcycle, showing its integration.

2. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• 1 x Motorcycle Speedometer
• 1 x Speed Sensor
• 1 x取付金具
• 1 x Installation Instruction (Electronic version available upon request)

3. 技術仕様

Image 3.1: Detailed dimensions of the speedometer gauge.

4. セットアップとインストール

Installation of the speedometer requires basic electrical knowledge. If you are unsure, consult a professional motorcycle mechanic.

4.1 配線図

Refer to the following diagram for proper wiring connections. Ensure all connections are secure and insulated to prevent short circuits.

Image 4.1: Wiring connections for the speedometer and speed sensor.

Main Connector (9-pin):

• 黒： IGN+ (Ignition Positive)
• 青： ハイビーム
• 緑： Power supply (Ground)
• 紫： Normal current+
• Yellow & White: オイルレベル
• オレンジ： Turn left signal
• Blue & White: 速度信号
• 茶色： バックライト
• ライトブルー： Turn right signal

Speed Sensor Connector (3-pin):

• 赤： Speed signal +
• 緑： Speed signal -
• 黄： Speed signal +
• 黒： Signal (Output)

Gear Indicator Connector (6-pin):

• ピンク： 1速
• 青赤: 2速
• Green & Black: 3速
• Yellow & Red: 4速
• Brown & White: 5速
• 緑と赤: 中性
• 灰色のワイヤー： 6速

4.2 Tire Circumference Adjustment

The speedometer's accuracy depends on correct tire circumference settings. The adjustable range is 40"-118". Consult your motorcycle's manual for the exact tire circumference or measure it accurately. The adjustment procedure is typically performed during initial setup via the button on the gauge.

5. 操作手順

5.1 表示機能

The digital display provides comprehensive information at a glance:

Image 5.1: Labeled interface display showing various indicators and readings.

• スピード： Digital display in MPH or KM/H.
• タコメーター: Analog dial (x1000 RPM) and digital display.
• ギアインジケーター： Displays current gear (1-6) or Neutral (N).
• 走行距離計（ODO）： 累計走行距離。
• トリップメーター（TRIP）： Resettable mileage for individual trips.
• 油量： Bar graph indicator.
• Turn Indicators: Left and Right arrows illuminate.
• High Beam Indicator: Symbol illuminates when high beams are active.
• Neutral Gear Indicator: 'N' symbol illuminates when in neutral.
• Fuel Alarm: Flashing icon when fuel level is low.

5.2 Unit Switching and Display Modes

The single button on the gauge allows for switching between different display modes and units.

Image 5.2: Visual representation of unit and display mode switching.

• Switching Speed Units (MPH/KM/H): After the instrument panel is activated, press and hold the button for 3-5 seconds. The speed unit will automatically switch.
• Toggling Odometer/Trip Meter: A short press of the button will toggle between the ODO (cumulative mileage) and TRIP (subtotal mileage) readings.

5.3 Low Oil Alarm Function

The speedometer is equipped with a low oil alarm. If the oil level falls below a predetermined threshold, the outer frame of the digital display will flash, and the dedicated empty oil indicator light will illuminate to alert the rider.

Image 5.3: Display clarity in both daytime and nighttime conditions.

6. お手入れとメンテナンス

6.1 防水性能

The MAIMEIMI motorcycle speedometer is designed with good waterproof performance. The high-quality ABS material and epoxy resin sealed LCD screen allow for normal operation even in rainy weather. However, avoid prolonged submersion or high-pressure water jets directly on the unit.

Image 6.1: The speedometer demonstrating its waterproof capabilities.

6.2一般的なケア

• ディスプレイとハウジングを柔らかくて清潔な布で拭いてください。amp 布。
• 研磨剤入りのクリーナー、溶剤、または強力な化学薬品は使用しないでください。ディスプレイやハウジングが損傷する可能性があります。
• すべての接続がしっかりと締まっており、腐食がないことを確認してください。
• Periodically check the mounting bracket for security.

7。 トラブルシューティング

If you encounter issues with your speedometer, consider the following common troubleshooting steps:

• 電源/ディスプレイなし: Check all wiring connections, especially the power supply (Green wire for ground, Black wire for IGN+). Ensure the motorcycle's battery is charged and providing 12V DC.
• スピードリーディングの誤り: Verify the tire circumference setting is correct. Check the speed sensor wiring (Blue & White wire) and ensure the sensor is properly installed and functioning.
• Tachometer Not Working: Ensure the tachometer signal wire (if applicable and connected) is correctly wired.
• Gear Indicator Issues: Check the wiring for each gear signal. Ensure the gear sensor on your motorcycle is functioning correctly.
• Oil Level Indicator Malfunction: Check the Yellow & White wire connection to the oil level sensor. Ensure the oil level sensor itself is working.
• Indicators (Turn/High Beam) Not Working: Verify the Orange (Left Turn), Light Blue (Right Turn), and Blue (High Beam) wires are correctly connected to their respective motorcycle circuits.

If these steps do not resolve the issue, it is recommended to seek assistance from a qualified motorcycle technician or contact MAIMEIMI customer support.

8. サポートと援助

For further assistance or if you have questions regarding the installation or operation of your MAIMEIMI Universal Motorcycle Digital Speedometer Gauge, please refer to the following:

• 電子マニュアル: If a physical user manual was not included in your package, an electronic version can be requested from MAIMEIMI customer support.
• 専門家の支援: For complex installation or troubleshooting, it is advisable to consult with experienced maintenance personnel or a certified motorcycle mechanic.
• Contact MAIMEIMI: For direct support, please reach out to MAIMEIMI customer service through the platform where the product was purchased.